Manual Philips S575 Shaver

Manual

’Battery low’ indication

- When the battery is almost empty

(when there are only 5 or fewer

shaving minutes left), the minutes

indication and the plug symbol

start ashing (Fig. 6).

- When you switch off the shaver, the

shaving minutes and the plug symbol

continue to ash for a few more

seconds.

’Remaining battery capacity’

indication

- The remaining battery capacity is

indicated by the number of shaving

minutes shown on the display (Fig. 7).

- The remaining battery capacity is

shown when you switch the shaver on

or off.

Travel lock

You can lock the shaver when you are going

to travel. The travel lock prevents the shaver

from being switched on by accident.

Note: The travel lock cannot be activated

when the shaver is connected to the mains.

Activating the travel lock

1 Press and hold the on/off button until

the travel lock symbol stops ashing

and the motor stops running (Fig. 8).

The travel lock is now activated.

Note: If you release the on/off button before

the travel lock symbol stops ashing, the travel

lock is not activated.

Deactivating the travel lock

1 Press and hold the on/off button until

the travel lock symbol stops ashing

and the motor starts running.

The shaver is now ready for use again.

Note: When you start charging, the travel lock

is deactivated automatically.

Charging

It takes approx. 60 minutes to fully charge

the battery.

When you charge the shaver for the rst

time or after a long period of disuse,

let it charge for 90 minutes.

A fully charged shaver provides up to

50 shaving minutes.

If you have a heavy beard, the shaver may

provide less than 50 shaving minutes.

The number of shaving minutes may also

vary over time, depending on your shaving

behaviour, cleaning habits and beard type.

Charging for one shave

As the shaver charges, the display shows

the number of shaving minutes available.

Depending on the number of minutes

you usually need for one shave, you can

determine when the shaver contains

enough energy for one shave.

Charging

Do not charge the shaver in a closed

pouch or in the packaging.

1 Put the small plug in the shaver.

2 Put the adapter in the wall socket.

, The display shows that the shaver

is charging (see chapter ‘The display’).

Note: When you remove the adapter from

the wall socket and leave the small plug in

the shaver, the shaver may not work for a

few seconds.

Using the shaver

Note: You cannot use the shaver while it is

connected to the mains.

Shaving

Skin adaptation period

Your rst shaves may not bring you the

result you expect and your skin may even

become slightly irritated. This is normal.

Your skin and beard need time to adapt to

any new shaving system.

We advise you to shave regularly (at least

3 times a week) for a period of 3 weeks to

allow your skin to adapt to the new shaver.

During this period, use your new electric

shaver exclusively and do not use other

shaving methods. If you use different shaving

methods, it is more difcult for your skin to

adapt to the new shaving system.

1 Press the on/off button to switch on

the shaver.

2 Move the shaving heads over your

skin. Make both straight and circular

movements (Fig. 9).

3 Press the on/off button to switch off

the shaver.

4 Clean the shaver after every

shave (see chapter ‘Cleaning and

maintenance’).

Wet shaving

You can also use this shaver on a wet face

with shaving foam or shaving gel.

To shave with shaving foam or shaving gel,

follow the steps below:

1 Apply some water to your skin.

2 Apply shaving foam or shaving gel to

your skin.

3 Rinse the shaving unit under the tap

to ensure that the shaving unit glides

smoothly over your skin.

4 Press the on/off button to switch on

the shaver.

5 Move the shaving heads over your

skin. Make both straight and circular

movements.

Note: Rinse the shaver under the tap regularly

to ensure that it continues to glide smoothly

over your skin.

6 Dry your face and thoroughly rinse

the shaver with a sufcient amount

of water after every shave. Make sure

you rinse all foam or shaving gel off

the shaver (see also chapter ‘Cleaning

and maintenance’).

Trimming

You can use the trimmer to groom

your sideburns and moustache.

1 Pull the shaving unit straight off the

shaver (Fig. 10).

Note: Do not twist the shaving unit while you

pull it off the shaver.

2 Insert the lug of the trimmer into the

slot in the top of the shaver (1).

Then press down the trimmer (2) to

attach it to the shaver (‘click’) (Fig. 11).

3 Press the on/off button to switch

on the trimmer. You can now start

trimming.

4 Press the on/off button to switch off

the trimmer.

5 Pull the trimmer straight off the

shaver (Fig. 12).

Note: Do not twist the trimmer while you pull

it off the shaver.

6 Insert the lug of the shaving unit into

the slot in the top of the shaver

(1). Then press down the shaving

unit (2) to attach it to the shaver

(‘click’) (Fig. 13).

Facial cleansing and oil control

with cleansing brush (specic

types only)

Longer lasting oil control than manual

cleansing*. Simply click the brush on the

shaver and give your facial skin a 1 minute

deep clean, helping to deeply cleanse any

oil. The brush can be used in combination

with your own daily cleansing product.

The cleansing effect removes oil and dirt,

contributing to a healthy skin and oil free

feeling.

General warnings

- Do not clean the sensitive area around

your eyes.

- Do not use the appliance on chapped

skin, open wounds, or if you suffer from

skin diseases or skin irritations, such as

severe acne, sunburn, skin infection, etc.

- Do not use the appliance with self-

made cleansers or cleansers containing

harsh chemicals or rough particles.

- Do not use the appliance more than

twice a day.

1 Pull the shaving unit straight off the

shaver (Fig. 10).

Note: Do not twist the shaving unit while you

pull it off the shaver.

2 Insert the lug of the cleansing brush

into the slot in the top of the shaver

(1). Then press down the cleansing

brush (2) to attach it to the shaver

(‘click’) (Fig. 14).

3 Moisten the cleansing brush and your

face with warm water and cleansing

products.

Tip: Use the cleansing brush before shaving

for an easier shaving and a more hygienic

shaving result.

4 Press the on/off button to switch on

the appliance.

5 Start cleaning the T-zone with the

brush (Fig. 15).

Note: Make circular motions no more than

3 times in one spot.

6 Start cleaning the rest of your face.

Tip: Treat your face with the brush for about

one minute.

*compared to manual cleansing in the same

condition, according to the results from an

external test on 30 male Asian candidates

and in 3 hours after cleansing.

Cleaning and maintenance

Never use compressed air, scouring pads,

abrasive cleaning agents or aggressive

liquids such as petrol or acetone to clean

the appliance and its accessories.

- Clean the shaver after every shave.

- Clean the shaving heads frequently

with Philips Shaving Head Cleaning

Spray (HQ110) for optimal shaving

performance.

- You can clean the outside of the

shaver with a damp cloth. Do not clean

the shaving unit with a cloth.

Cleaning the shaving unit

Be careful with hot water. Always check if

the water is not too hot, to prevent your

hands from getting burnt.

1 Switch off the shaver.

2 Rinse the shaving unit under a hot tap

for some time (Fig. 16).

Note: You can also clean the shaving unit with

the cleaning brush supplied.

3 After rinsing the appliance under the

tap, hold it upright for 10-15 seconds

to allow water to run out of the

bottom.

4 Press the release buttons on the

shaving unit (1) and pull the shaving

head holder off the shaving unit (2).

(Fig. 17)

5 Rinse the shaving head holder under a

hot tap for 30 seconds (Fig. 18).

Note: You can also clean the shaving head

holder with the cleaning brush supplied.

6 Carefully shake off excess water and

let the shaving head holder dry.

Never dry the shaving head holder with

a towel or tissue, as this may damage the

shaving heads.

7 Reattach the shaving head holder

to the shaving unit (‘click’) (Fig. 19).

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Philips S575 Shaver. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Philips. They might be able to provide an original manual. Are you looking for the manual of your Philips S575 Shaver in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Philips Shavers
More manuals of Shavers

Frequently Asked Questions about Philips S575 Shaver

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Philips BRR464 Shaver

Manual

Philips HQ988 Shaver

Manual

Philips HQ6950 Shaver

Manual

Philips PT732 Shaver

Manual

Philips RQ1167 SensoTouch Shaver

Manual

Philips QP2523 One Blade Shaver

Manual

Philips PT856 Shaver

Manual

Philips S5889 Shaver

Related categories