Manual Philips S321 Shaver

Manual

Note: Make sure that the lug of the protection

cap covers the release button.

Cleaning and maintenance

Never use scouring pads, abrasive cleaning

agents or aggressive liquids such as petrol

or acetone to clean the appliance.

Clean the shaver after every shave to

guarantee better shaving performance.

For the best cleaning result, we advise you

to use Philips Cleaning Spray (HQ110).

Ask your Philips dealer for information.

Note: Philips Shaving Head Cleaning

Spray (HQ110) may not be available in all

countries. Contact the Consumer Care Centre

in your country about the availability of this

accessory.

After every shave: cleaning

the shaver

1 Switch off the shaver, remove the

adapter from the wall socket and pull

the plug out of the shaver.

2 Rinse the shaver under a warm tap for

some time. (Fig. 10)

Note: For additional cleaning you can also

start by using the cleaning brush to remove

hairs.

3 Press the release button (1) and pull

the shaving unit in a straight upward

movement off the shaver (2). (Fig. 11)

4 Rinse the shaving unit and hair

chamber under a warm tap. (Fig. 12)

Note: For additional cleaning you can also

start by using the cleaning brush to remove

hairs.

5 Carefully shake off excess water

and let the shaving unit and hair

chamber dry.

6 Put the shaving unit back onto the

shaver (Fig. 13).

Every two months: cleaning the

shaving heads

Note: Do not use cleaning agents or alcohol

to clean the shaving heads. Only use Philips

Cleaning Spray (HQ110).

1 Switch off the shaver, remove the

adapter from the wall socket and pull

the small plug out of the shaver.

2 Press the release button (1) and pull

the shaving unit in a straight upward

movement off the shaver (2) (Fig. 11).

3 Turn the orange wheel anticlockwise

(1) and remove the retaining frame

(2) (Fig. 14).

4 Remove and clean one shaving head

at a time. Each shaving head consists

of a cutter and a guard (Fig. 15).

Note: Do not clean more than one cutter and

guard at a time, since they are all matching

sets. If you accidentally mix up the cutters

and guards, it may take several weeks before

optimal shaving performance is restored.

5 Remove the guard from the

cutter (Fig. 16).

6 Clean the cutter and guard under the

tap (Fig. 17).

Note: For additional cleaning you can also

start by using the cleaning brush to remove

hairs.

7 After cleaning, place the cutter back

into the guard. (Fig. 18)

8 Put the shaving heads back into the

shaving unit. (Fig. 19)

9 Put the retaining frame back into the

shaving unit (1) and turn the orange

wheel clockwise (2) (Fig. 20).

10 Put the shaving unit back onto the

shaver (Fig. 13).

Storage

Keep the appliance dry.

Store the appliance in a safe, dry place.

1 Switch off the shaver.

2 Put the protection cap on the shaver

after use to prevent damage and

dirt accumulation in the shaving

heads (Fig. 9).

Note: Make sure that the lug of the protection

cap covers the release button.

Replacement

Replace the shaving heads every two years

for optimal shaving results.

Replace damaged or worn shaving heads

with Philips shaving heads only.

For instructions on how to remove the

shaving heads, see chapter ‘Cleaning and

maintenance’, section ‘Every two months:

shaving heads’.

Ordering accessories

To buy accessories or spare parts, visit

www.shop.philips.com/service or go

to your Philips dealer. You can also contact

the Philips Consumer Care Centre in your

country (see the worldwide guarantee

leaet for contact details).

To retain the top performance of your

shaver, make sure you clean it regularly

and replace its shaving heads at the

recommended time.

Shaving heads

- We advise you to replace your shaving

heads every two years. Always replace

them with Philips shaving heads

only (Fig. 21).

Cleaning

- Use Philips Cleaning Spray (HQ110) to

clean the shaving heads thoroughly.

Recycling

Do not throw away the appliance with the

normal household waste at the end of its

life, but hand it in at an ofcial collection

point for recycling. By doing this, you help to

preserve the environment.

Guarantee and support

If you need information or support, please

visit www.philips.com/support or read

the separate worldwide guarantee leaet.

Guarantee restrictions

The shaving heads (cutters and guards)

are not covered by the terms of the

international guarantee because they are

subject to wear.

Troubleshooting

This chapter summarises the most common

problems you could encounter with the

appliance. If you are unable to solve the

problem with the information below, visit

www.philips.com/support for a list of

frequently asked questions or contact the

Consumer Care Centre in your country.

Problem Possible

cause

Solution

The

shaver

does not

shave as

well as it

used to.

The shaving

heads are

dirty. You

have not

cleaned the

shaver well

enough or

you have

not cleaned

it for a long

time.

Clean the

shaving heads

thoroughly

before you

continue

shaving.

See chapter

‘Cleaning and

maintenance’.

Long

hairs ob-

struct the

shaving

heads.

Clean the

cutters and

guards with

the clean-

ing brush

supplied.

See chapter

‘Cleaning and

maintenance’,

section ‘Every

two months:

shaving heads’.

You mixed

up the

cutters

and guards

when you

placed them

back into

the retaining

frame after

cleaning.

Put each

cutter in the

other guard.

If you do not

switch the

cutters, it

may take 2

to 3 weeks

until optimal

shaving

performance

is restored.

The shaving

heads are

damaged or

worn.

Replace the

shaving heads.

See chapter

‘Replacement’.

Problem Possible

cause

Solution

The

shaver

does not

work

when

I push

the on/

off slide

upwards.

The re-

chargeable

battery is

empty.

Recharge

the battery.

See chapter

‘Charging’.

My

skin is

irritated

after

shaving.

Your skin

needs time

to get used

to the

Philips shav-

ing system.

Skin irritation

during the

rst 2-3

weeks of use

is possible.

After this

period, the

skin irritation

usually disap-

pears.

The

rotation

speed of

the shav-

ing heads

is slower

than

usual.

Too much

dirt has

collected in

the shaving

heads.

Clean the

shaving heads.

See chapter

‘Cleaning and

maintenance’.

The re-

chargeable

battery is

low.

Recharge

the battery.

See chapter

‘Charging’.

The

appliance

makes a

strange

noise.

Too much

dirt has

collected in

the shaving

heads.

Clean the

shaving heads.

After cleaning,

lubricate

the central

point on the

inside of the

guards with

Philips Clean-

ing Spray

(HQ110).

See chapter

‘Cleaning and

maintenance’.

The shaving

heads are

damaged or

worn.

Replace the

shaving heads.

See chapter

‘Replacement’.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Philips S321 Shaver. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Philips. They might be able to provide an original manual. Are you looking for the manual of your Philips S321 Shaver in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Philips Shavers
More manuals of Shavers

Frequently Asked Questions about Philips S321 Shaver

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Philips RQ1286 SensoTouch 3D Shaver

Manual

Philips YS522 Shaver

Manual

Philips MVL5598 Marvel Captain America Shaver

Manual

Philips HQ906 Shaver

Manual

Philips S9982 Shaver

Manual

Philips PQ220 Shaver

Manual

Philips S5887 Shaver

Manual

Philips S5586 Shaver

Related categories