Manual Philips QP2533 One Blade Shaver

Manual

Charging normally takes approx. 4 hours.

A fully charged appliance has an operating time of

up to 60 minutes.

Battery charge indicator

The battery status is indicated by the performance

of the appliance. When the appliance starts

working more slowly, the battery is almost empty

and needs to be charged for optimal performance.

Charging with the supply unit

1 Insert the small plug into the appliance and put

the supply unit in the wall socket (Fig. 5).

-

The battery charge indicator on the supply

unit lights up continuously, when the

appliance is connected to the wall socket.

2 After charging, remove the supply unit from the

wall socket and pull the small plug out of the

appliance.

Using the appliance

You can use the appliance to trim, edge or shave

facial hair (beard, moustache and sideburns).

Shave for a smooth result, trim to obtain a certain

length and edge to create perfect edges and sharp

lines. This appliance is not intended for shaving,

edging or trimming hairs on lower body parts or

scalp hair. Take your time when you first start to

use the appliance. You have to acquire practice

with the appliance.

Note: This appliance can only be used without cord

(Fig. 4).

Switching the appliance on and off

1 To switch on the appliance, press the on/off

button once (Fig. 6).

2 To switch off the appliance, press the on/off

button once.

Shaving

Warning: Before you use the appliance, always

check the blade for damage or wear. If the

blade is damaged or worn, do not use the

appliance, as injury may occur. Replace a

damaged blade before you use the appliance

(see 'Replacement').

Shaving tips and tricks

- Make sure that the blade is in full contact with

the skin by placing it flat on the skin (Fig. 8).

- For the best result, move the appliance against

the grain (Fig. 7).

- Make long strokes while pressing lightly.

- You can use the appliance dry or wet with gel or

foam. You can even use the appliance in the

shower.

- Shaving a clean beard and face gives the best

results.

Shaving

Before you use the appliance, always check

the blade for damage or wear. If the blade is

damaged or worn, do not use the appliance, as

injury may occur. Replace a damaged blade

before you use the appliance.

1 Switch on the appliance.

2 Place the blade on the skin and move the

appliance up or against the grain in long strokes

while you press it lightly (Fig. 7).

Note: Make sure you hold the surface of the

blade flat against your skin (Fig. 8).

3 Switch off and clean the appliance after every

use (see 'Cleaning and maintenance').

Edging

- You can also use both edges of the blade to

create sharp lines and perfect edges.

- Hold the appliance in such a way that the blade

is perpendicular to the skin and one of its edges

touches the skin. This allows more precise

detailing of sideburns and the area around the

mouth and nose.

1 Switch on the appliance.

2 Place the edge of the blade perpendicular onto

the skin (Fig. 9).

Note: To use the blade for creating sharp edges

and lines, use either edge of the blade (Fig. 10).

3 Make straight strokes while applying gentle

pressure (Fig. 11).

4 Switch off and clean the appliance after every

use (see 'Cleaning and maintenance').

Cleaning and maintenance

Clean the appliance after every use.

Never use compressed air, scouring pads, abrasive

cleaning agents or aggressive liquids such as

petrol or acetone to clean the appliance.

Do not tap the appliance against a surface to

remove water from it, as this may cause damage

(Fig. 12). Replace the blade if it is damaged.

Never dry the blade with a towel or tissue, as this

may cause damage.

Cleaning the appliance

1 Blow off any hairs that have accumulated on

the blade (Fig. 13).

2 Switch on the appliance and rinse the blade

with lukewarm water (Fig. 14).

Caution: Do not dry the blade with a towel or a

tissue as this may cause damage.

3 Carefully shake off excess water and let all parts

air dry completely.

Note: The blade is fragile. Handle it carefully.

Replace the blade if it is damaged.

Storage

Always attach the protection cap on the blade to

protect the blade from damage during travelling or

storage.

We advise you to let the appliance and its

attachments are completely dry before you store

them for the next use.

1 Place the protection cap onto the edge of the

blade (Fig. 15).

2 Close the protection cap (Fig. 16).

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Philips QP2533 One Blade Shaver. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Philips. They might be able to provide an original manual. Are you looking for the manual of your Philips QP2533 One Blade Shaver in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Philips Shavers
More manuals of Shavers

Frequently Asked Questions about Philips QP2533 One Blade Shaver

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Philips RQ320 Shaver

Manual

Philips HQ6923 Shaver

Manual

Philips QP2523 One Blade Shaver

Manual

Philips HP6342 Ladyshave Shaver

Manual

Philips BRL166 Shaver

Manual

Philips PT764 Shaver

Manual

Philips S1000 Shaver

Manual

Philips PQ197 Shaver

Related categories