Manual Philips PQ216 Shaver

Need a manual for your Philips PQ216 Shaver? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

, The charging light goes on to indicate that
the appliance is charging (Fig. 5).
4 Remove the shaver from the wall socket
when the battery is fully charged.
5 Press the release button (1) and fold the
foldable plug back into the appliance (2)
(‘click’) (Fig. 6).
Note: The light on the shaver does not change colour
and does not go out when the shaver is fully charged.
Cordless shaving time
A fully charged shaver has a cordless shaving
time of approximately 30 minutes.
Using the appliance
The shaver cannot be used directly from the
mains.
1 Remove the protection cap.
2 Push the on/off slide upwards to switch on
the shaver (Fig. 7).
3 Move the shaving heads over your skin. Make
both straight and circular movements (Fig. 8).
Note: Shave on a dry face only. Do not use the
shaver in combination with gel, foam or water.
Note: Your skin may need 2 or 3 weeks to get
accustomed to the Philips shaving system.
4 Push the on/off slide downwards to switch off
the shaver.
5 Clean the shaver after every shave, see
chapter ‘Cleaning and maintenance’.
6 Put the protection cap on the shaver after
use to prevent damage and to avoid dirt
accumulation in the shaving heads (Fig. 9).
Cleaning and maintenance
Never use scouring pads, abrasive cleaning
agents or aggressive liquids such as petrol or
acetone to clean the appliance.
Clean the shaver after every shave to guarantee
better shaving performance. For the best cleaning
result, we advise you to use Philips Cleaning Spray.
Ask your Philips dealer for information.
After every shave: shaving unit and
hair chamber
1 Switch off the shaver.
2 Clean the top of the appliance with the
cleaning brush supplied (Fig. 10).
3 Pull the shaving unit straight up off the
shaver (Fig. 11).
4 Clean the inside of the shaving unit with the
cleaning brush (Fig. 12).
5 Clean the hair chamber with the cleaning
brush (Fig. 13).
6 Put the shaving unit back onto the
shaver (Fig. 14).
ENGLISH
Introduction
Congratulations on your purchase and welcome
to Philips! To fully benet from the support
that Philips offers, register your product at
www.philips.com/welcome.
General description (Fig. 1)
1 Protection cap
2 Shaving heads
3 Shaving unit
4 Hair chamber
5 On/off slide
6 Front panel
7 Charging light
8 Foldable plug
9 Release button of foldable plug
10 Retaining frame
11 Central spring of retaining frame
12 Cutter
13 Guard
14 Philips Cleaning Spray (Optional)
15 Cleaning brush
Important
Read this user manual carefully before you use the
appliance and save it for future reference.
Danger
- Keep the appliance dry.
- This symbol means: Forbidden to clean under
a running tap (Fig. 2).
Warning
- This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
- Children should be supervised to ensure that
they do not play with the appliance.
Caution
- Use and store the appliance at a temperature
between 5°C and 35°C.
- Only use the cleaning brush supplied.
- Make sure the cleaning brush remains clean.

This Philips appliance complies with all standards
regarding electromagnetic elds. If handled
properly and according to the instructions in this
user manual, the appliance is safe to use based on
scientic evidence available today.
Charging
Charge the appliance when the motor stops or
starts running slower.
When you charge the shaver for the rst time
or after a long period of disuse, let it charge
continuously for 12 hours. Charging normally takes
approx. 8 hours.
Do not leave the appliance connected to the
mains for more than 24 hours.
1 Switch off the shaver before you start
charging it.
2 Press the release (1) button and fold out the
foldable plug (2) (‘click’) (Fig. 3).
3 Insert the foldable plug unit into the wall
socket (Fig. 4).
Every two months: shaving heads
Note: Do not use cleaning agents or alcohol to clean
the shaving heads. Only use Philips Cleaning Spray.
1 Switch off the shaver.
2 Pull the shaving unit straight up off the
shaver (Fig. 15).
3 To remove the retaining frame, turn the
central spring clockwise (1).Then lift
the retaining frame out of the shaving
unit (2) (Fig. 16).
4 Lift the shaving heads out of the shaving unit.
Remove and clean one shaving head at a
time. Each shaving head consists of a cutter
and a guard (Fig. 17).
Note: Do not clean more than one cutter and
guard at a time, since they are matching sets. If
you accidentally mix up the cutters and guards, it
may take several weeks before optimal shaving
performance is restored.
5 Remove the guard from the cutter (Fig. 18).
6 Clean the cutter with the short-bristled side
of the cleaning brush. Brush carefully in the
direction of the arrows (Fig. 19).
7 Clean the guard with the long-bristled side of
the cleaning brush (Fig. 20).
8 Put the cutter back into the guard after
cleaning (Fig. 21).
9 Put the shaving heads back into the shaving
unit (Fig. 22).
10 Put the retaining frame back into the shaving
unit (1), and turn the central spring anti
clockwise (2) (Fig. 23).
11 Put the shaving unit back onto the
shaver (Fig. 14).
Storage
Keep the appliance dry.
Use and store the appliance at a temperature
between 5°C and 35°C.
1 Switch off the shaver.
2 Put the protection cap on the shaver after
use to prevent damage and to avoid dirt
accumulation in the shaving heads (Fig. 9).
Replacement
Replace the shaving heads every two years for
optimal shaving results.
Replace damaged or worn shaving heads with
Philips shaving heads only (HQ4 for China or
HQ56 for the rest of the world).
For instructions on how to remove the shaving
heads, see chapter ‘Cleaning and maintenance’,
section ‘Every two months: shaving heads’.
Accessories
To retain top performance of your shaver, make
sure you clean it regularly and replace its shaving
heads at the recommended time.
Shaving heads
- We advise you to replace your shaving heads
every two years. Always replace them with
Philips shaving heads only (HQ4 for China or
HQ56 for the rest of the world) (Fig. 24).
PQ216
Register your product and get support at
www.philips.com/welcome
4222.002.5463.1
1
2
3 4
5
6 7
8 9
10
11
12 13
14
15 16
17
18 19
20 21
22
23
24 25
26
27 28
Download manual in English (PDF, 1.5 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Philips PQ216 Shaver by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Philips PQ216 Shaver?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Philips PQ216 Shaver. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Philips PQ216 Shaver. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Philips. They might be able to provide an original manual. Are you looking for the manual of your Philips PQ216 Shaver in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Philips
Model PQ216
Category Shavers
File type PDF
File size 1.5 MB

All manuals for Philips Shavers
More manuals of Shavers

Frequently Asked Questions about Philips PQ216 Shaver

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How often should I clean the shaver heads on my Philips shaver? Verified

Philips recommends to do this every two months. Regular cleaning will increase the lifespan of the device.

This was helpful (261) Read more

How long does a shaver head last before it needs to be replaced? Verified

Depending on how often it is used a shaver head lasts between 6 months and 2 years. To ensure an optimal result it is best to replace the shaver head once a year.

This was helpful (202) Read more

In what direction should I shave? Verified

In most cases it is recommended to shave with the direction of hair growth. This reduces the risk of irritated skin and ingrown hair.

This was helpful (184) Read more

What is the difference between vibrating and rotating shaver heads? Verified

This is mostly a matter of personal needs and preference, but in general it can be said that the blades in vibrating shaver heads move faster and therefor offer quicker results. A rotating shaver head can reach certain areas of the face more easily.

This was helpful (165) Read more

Where can I find the model and/or serial number of my Philips shaver? Verified

The model number can be found on the back of the device. Sometimes the serial number is located on the back of the device as well, otherwise it can be found underneath the clipper or in the hair chamber.

This was helpful (124) Read more
Manual Philips PQ216 Shaver

Related products

Related categories