Home > Audio, TV & Photo > Home Theater Systems > Philips Home Theater Systems > Philips HTS5563 Home Theater System

Manual Philips HTS5563 Home Theater System

Need a manual for your Philips HTS5563 Home Theater System? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

English

Radio

Listen to FM radio on your home theater, and

store up to 40 radio stations.

Note

• AM and digital radio are not supported.

• If no stereo signal is detected, or if fewer than

ve stations are found, you are prompted to

install the radio stations again.

1 Connect the FM antenna to the ANTENNA

FM 75

on your home theater.

• For the best reception, place the antenna

away from the TV or other sources of

radiation.

2 Press Source buttons repeatedly until

RADIO appears on the display panel.

» If you have already installed the radio

stations, the last channel that you listened

to is played.

» If you have not installed any radio

stations, the message AUTO

INSTALL...PRESS PLAY appears on

the display panel. Press

(Play).

3 Use the remote control to listen or to

change radio stations.

Play buttons

Button Action

Alphanumeric

buttons

Select a preset radio station.

Navigation

buttons

Left/Right: Search for a radio

station.

Up/Down: Fine tune a radio

frequency.

Press to stop the installation of

radio stations.

BACK

Press and hold to erase the

preset radio station.

OPTIONS

Manual: Press once to access

program mode, and press again

to store the radio station.

Automatic: Press and hold for

three seconds to reinstall the

radio stations.

SUBTITLE Toggle between the stereo and

mono sounds.

Tuning grid

In some countries, you can toggle the FM tuning

grid between 50 kHz and 100 kHz. Switching the

tuning grid erases all preset radio stations.

1 Press Source buttons repeatedly until

RADIO appears on the display panel.

2 Press .

3 Press and hold (Play) to toggle between 50

kHz or 100 kHz.

MP3 player

Connect a MP3 player to play audio les.

What you need

• An MP3 player.

• A 3.5mm or 6.5mm stereo audio cable.

1 Using the 3.5mm or 6.5mm stereo audio

cable, connect the MP3 player to the MUSIC

iLINK connector on your home theater.

• If you use 6.5mm stereo audio cable,

connect the MP3 player to your

home theater using a 3.5mm - 6.5mm

converter jack.

2 Press AUDIO SOURCE repeatedly until

MUSIC I-LINK appears on the display panel.

3 Press the buttons on the MP3 player to select

and play audio les.

Rating

Let us know what you think about the Philips HTS5563 Home Theater System by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Philips HTS5563 Home Theater System?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Philips HTS5563 Home Theater System. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Philips HTS5563 Home Theater System. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Philips. They might be able to provide an original manual. Are you looking for the manual of your Philips HTS5563 Home Theater System in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.