2
SAFETY INFORMATION
Carefully read through the entire owner’s manual before operating
your 5 speed drill press. Keep manual with important records for
safety instructions, operating procedures and warranty.
• READ THE ENTIRE MANUAL.
• GROUND ALL TOOLS. Any tool supplied with a 3-prong plug must
be plugged into a 3-contact electrical receptacle. The 3rd prong is
used to ground the tool and provide protection against accidental
electrical shock. Never remove the third prong.
• AVOID DANGEROUS ENVIRONMENTS. Do not use power tools
near gasoline or other flammable materials, in damp or wet locations
or expose them to rain. Keep work area well lit. Normal sparking of
the motor or sparking from drilling metal could ignite fumes.
• KEEP WORK AREA CLEAN. Messy areas and cluttered work
benches invite personal injury and or property damage.
• KEEP CHILDREN AND VISITORS AWAY. All children should be
kept away from the work area. Maintain a safe distance for any
person near the work area. Adults near the work area must wear
safety glasses. DO NOT let children handle the power tool or
extension cord.
• DRUGS, ALCOHOL, MEDICATION. Operating any tool or
equipment under the influence of drugs, alcohol, and / or medication
can cause personal injury to yourself and others.
• WEAR PROPER APPAREL. Remove your jewelry before using
tool. DO NOT wear loose clothing, neckties, rings, bracelets, or
other jewelry which may get caught in moving parts. Non skid
footwear and non-electrically conductive gloves are highly
suggested while working. Wear protective hair covering to contain
long hair.
• PROTECT YOUR EYES.
The operation of any power tool can result in foreign objects being
thrown into the eyes which can result in severe eye damage.
Always wear eye protection during power tool operation.
Eyeglasses are not always safety glasses.
• BE RESPONSIBLE FOR YOUR HEARING AND BREATHING.
Wear hearing protection during extended periods of operation.
Protect your lungs by wearing a clean face or dust mask.
• GUARD AGAINST ELECTRICAL SHOCK. Avoid body contact with
grounded surfaces such as pipes, radiators, ovens, stoves and
refrigerator enclosures.
• USE THE RIGHT TOOL. Use tools properly and for its intended task.
DO NOTforce a small tool to do the job of a heavy duty tool. Using the
right tool to do the right job will do the job intended and safer.
• CHECK DAMAGED PARTS. Before use of a tool, a guard or
other part that is damaged, it should be carefully checked to assure
that it will operate properly and perform its intended function. Check
for misalignment or binding of moving parts, breakage of parts,
mounting, or any other conditions that may affect its operation. A
guard or other part that is damaged should be properly replaced.
• KEEP PROTECTIVE GUARDS IN PLACE AND IN PROPER
WORKING CONDITION.
BEFORE USING YOUR DRILL PRESS
WARNING: When using electrical tools, machines or
equipment, basic safety precautions should always be
followed to minimize the risk of fire, electrical shock or
personal injury to yourself and others.
• AVOID UNINTENTIONAL STARTING. Be sure that your power
tool is in the “OFF” position before plugging it into a power cord or
electrical receptacle.
• STORE ALL MAINTENANCE TOOLS away from the immediate
area prior to turning “ON” your drill press.
• DO NOT OVERREACH. Proper footing and balance is a must at all
times while using the tool. Unstable support may lead to personal
injury.
• DO NOT STAND ON THE TOOL. Serious injury could result if
the tool tips over or you accidentally contact the tool.
• NEVER LEAVE TOOL RUNNING UNATTENDED.
ALWAYS turn the power to the “OFF” position and do not leave the
tool until it comes to a complete stop.
• USE RECOMMENDED ACCESSORIES. Consult the owners
manual for recommended accessories. The use of improper
accessories may cause risk of injury to yourself and others.
• ALWAYS MAKE SURE THE TOOL IS IN THE “OFF”
POSITION AND UNPLUGGED from the electrical receptacle
when making adjustments, changing parts or performing
any maintenance.
• SECURE WORK. When possible the use of clamps or a holding
device is much safer than holding the workpiece with your
hands.
• MAINTAIN TOOLS WITH CARE. Tools function better and
safer when kept clean and in good working condition.
Keeping the tool clean, dry, free of grime will add to its life
and performance.
• CHILDPROOF THE WORKSHOP. The use of master switches
and padlocks is highly suggested. Remove starter keys.
• EXTENSION CORD GUIDELINES. Use only 3-wire extension
cords that have 3-prong grounding type plugs and 3 prong
receptacles that accept the tool’s plug. Only UL listed extension
cords should be used with this product. Improper use of extension
cords may cause inefficient operation of your tool which can result
in overheating. Be sure your extension cord is rated to allow
sufficient flow to the motor. Refer to guide below for minimum
gauge for extension cords.
EXTENSION CORD LENGTH WIRE SIZE (A.W.G.)
Up to 25 feet 16
26 to 50 feet 16
51 to 100 feet 16
The use of an extension cord heavy enough to carry the current a
tool will draw is very important. Especially when the power source
is of great distance. An extension cord that is insufficient will cause
a drop in line voltage, resulting in power loss and causing the motor
to overheat.
When the project requires you to be outdoors, use an extension cord
designed for outdoor use. The letters “WA” are indicated on the
jacket of the cord.
Join the conversation about this product
Here you can share what you think about the Performance Tool W50005 Drill Press. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.