Manual Parkside IAN 285213 Angle Grinder

Manual

PDWS 125 A1

US - EN 

│

 5 ■

■ Grinding discs and abrasive cutting discs may

not be used for side grinding (exception: grind-

ing discs for side grinding). Grinding machines

for abrasive media may only be operated at a

rotation speed which is less than the abrasive

media maximum speed;

■ ensure that no persons are standing in the im-

mediate vicinity.

■ Personal safety equipment such as suitable

gloves, aprons and protective helmets must be

worn.

■ Sparks caused by grinding can ignite clothing

and cause serious burns. You must ensure that

sparks do not impact clothing. Wear fire-retard-

ant clothing and ensure that there is a bucket of

water in the vicinity.

Risks due to repetitive movements

■ When using a grinding machine for abrasive

media to perform work-related activities, opera-

tors may experience uncomfortable sensations

in their hands and arms, as well as in the neck

and shoulders or other parts of the body.

■ When using a grinding machine for abrasive

media, the operator should adopt a comfort-

able posture whilst ensuring a secure hold

and avoiding awkward postures or positions

in which it is difficult to maintain balance. The

operator should change positions during the

course of long-lasting tasks. This can be helpful

in the prevention of discomfort and fatigue.

■ If the operator notices symptoms such as persis-

tent or recurring illness, discomfort, throbbing,

pain, tingling, burning or stiffness, these indica-

tions should not be ignored. In this case, the

operator should inform his/her employer and

consult a suitably qualified physician.

Hazards caused by accessories

■ Disconnect the grinding machine for abrasive

media from the power supply before fitting or

replacing the machine tools or accessories.

■ Use only accessories and supplies of the sizes

and types recommended by the manufacturer

of the grinding machine for abrasive media.

Never use any other types or sizes of accessory

parts and consumables.

■ Ensure that the dimensions of the abrasive me-

dia are compatible with those of the grinding

machine for abrasive media and that the abra-

sive media fits onto the spindle.

■ Ensure that the thread type and size of the

abrasive media exactly matches the thread type

and size of the spindle thread.

■ Always inspect the abrasive media before use.

Do not use any abrasive media which may

have been dropped or which shows signs of

splintering, cracking or other flaws.

■ Always ensure that the abrasive media has

been properly fixed and tightened firmly

enough before use; the grinding machine for

abrasive media must be operated at idling

speed for at least 1 minute in a safe location;

switch off the machine immediately if you notice

excessive vibration or any other damage; the

cause of these malfunctions must be determined.

■ Ensure that the spindle end does not contact the

bottom of the openings in cut wheels, grinding

cones or whetstones with thread inserts which

are intended for the attachment of machine

spindles, by checking the dimensions and other

important spindle data.

■ In the case of abrasive media which are sup-

plied with reducers or reducing bushings, or

which are intended for use with reducers or

reducing bushings, the operator must ensure

that the reducer or reducing bushing does not

contact the face of the clamping flange and that

the clamping force provides sufficient rotational

drive to prevent slipping of the abrasive media.

■ In cases in which clamping flanges for different

types and sizes of abrasive media have been

provided, always fit the correct clamping flange

for the abrasive media being used.

■ Avoid direct contact before and after use of the

machine tool since it can be hot or have sharp

edges.

■ The abrasive media must be handled and stored

in accordance with the manufacturer's instruc-

tions.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Parkside IAN 285213 Angle Grinder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Parkside. They might be able to provide an original manual. Are you looking for the manual of your Parkside IAN 285213 Angle Grinder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Parkside Angle Grinders
More manuals of Angle Grinders

Frequently Asked Questions about Parkside IAN 285213 Angle Grinder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Parkside IAN 314188 Angle Grinder

Manual

Parkside IAN 360196 Angle Grinder

Manual

Parkside PWSA 20-Li B2 Angle Grinder

Manual

Parkside IAN 338633 Angle Grinder

Manual

Parkside IAN 337395 Angle Grinder

Manual

Parkside IAN 290849 Angle Grinder

Manual

Parkside IAN 331943 Angle Grinder

Manual

Parkside PWS 135 F6 Angle Grinder

Related categories