Home > Audio, TV & Photo > Projectors > Panasonic Projectors > Panasonic PT-F300NTU Projector

Manual Panasonic PT-F300NTU Projector

Need a manual for your Panasonic PT-F300NTU Projector? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Precautions with regard to safety

ENGLISH - 7

Important

Information

Do not touch the leaked liquid from the batteries.

If you touch the leaked liquid, it may hurt your skin.

Immediately wash away the liquid with water and

seek medical advice.

If you get the leaked liquid in your eye, it may cause

blindness or damage. Never rub your eye, and

immediately wash away the liquid with water and

seek medical advice.

During a thunderstorm, do not touch the projector or

the cable.

Electric shocks can result.

Do not use the projector in a bath or shower.

Fire or electric shocks can result.

Do not place your skin into the light beam while the

projector is being used.

Strong light is emitted from the projector’s lens. If you

place directly into this light, it can hurt or damage

your skin.

Do not look into the lens while the projector is being

used.

Strong light is emitted from the projector’s lens. If you

look directly into this light, it can hurt and damage

your eyes.

Be especially careful not to let young children look

into the lens. In addition, turn off the power and

disconnect the power plug when you are away from

the projector.

Do not place your hands or other objects close to the

air outlet port.

Heated air comes out of the air outlet port. Do not

place your hands or face, or objects which cannot

withstand heat close to this port [allow at least

50 cm (20") of space], otherwise burns or damage

could result.

Replacement of the lamp is recommended to be

carried out by a qualified technician.

The lamp has high internal pressure. If improperly

handled, explosion might result.

The lamp can easily become damaged if struck

against hard objects or dropped, and injury or

malfunctions may result.

When replacing the lamp, allow it to cool for at least

one hour before handling it.

The lamp cover gets very hot, and touching it can

cause burns.

Before replacing the lamp, be sure to disconnect the

power plug from the wall outlet.

Electric shocks or explosions can result if this is not

done.

Do not allow infants or pets to touch the remote

control unit.

Keep the remote control unit out of the reach of

infants and pets after using it.

Do not cover the air inlet port or the air outlet port.

Doing so may cause the projector to overheat, which

can cause fire or damage to the projector.

Do not place the projector in narrow, badly ventilated

places such as closets or bookshelves.

Do not place the projector on cloth or papers, as

these materials could be drawn into the air inlet port.

Do not set up the projector in humid or dusty places

or in places where the projector may come into

contact with oily smoke or steam.

Using the projector under such conditions may result

in fire, electric shocks or plastic deterioration. The

plastic deterioration may cause the falling down of

the projector which is mounted on the ceiling.

Do not set up the projector in a high temperature

environment, such as near a heater or in direct

sunlight.

Failure to observe this may result in fire, malfunction

or plastic deterioration.

Do not set up the projector outdoors.

The projector is designed for indoor use only.

When disconnecting the power cord, hold the plug,

not the cord.

If the power cord itself is pulled, the cord will become

damaged, and fire, short-circuits or serious electric

shocks may result.

Always disconnect all cables before moving the

projector.

Moving the projector with cables still attached can

damage the cables, which could cause fire or electric

shocks to occur.

Do not place any heavy objects on top of the

projector.

Failure to observe this may cause the projector to

become unbalanced and fall, which could result in

damage or injury.

Do not short-circuit, heat or disassemble the

batteries or place them into water or fire.

Failure to observe this may cause the batteries to

overheat, leak, explode or catch fire, and burns or

other injury may result.

CAUTIONS

Rating

Let us know what you think about the Panasonic PT-F300NTU Projector by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Panasonic PT-F300NTU Projector?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Panasonic PT-F300NTU Projector. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Panasonic PT-F300NTU Projector. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Panasonic. They might be able to provide an original manual. Are you looking for the manual of your Panasonic PT-F300NTU Projector in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Panasonic
Model	PT-F300NTU
Category	Projectors
File type	PDF
File size	4 MB

All manuals for Panasonic Projectors
More manuals of Projectors

Frequently Asked Questions about Panasonic PT-F300NTU Projector

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I power off my projector immediately after use? Verified

After using the projector the lamp is still very hot. It is best to leave the projector on after use, giving the internal fan time to do it's work and cool the lamp. This will extend the lifetime of the lamp.

This was helpful (184) Read more

What is keystone correction? Verified

A projector can often not be placed straight in front of a screen or wall. The projected image can become distorted because of this. This is the keystone effect. Keystone correction is a feature that addresses this distortion. Not all projectors offer keystone correction.

This was helpful (122) Read more

What is the contrast ratio? Verified

The contrast ratio tells how far the whitest white is from the blackest black. A contrast ratio of for example 400:1 means that the blackest black on screen is 400 times darker than the whitest white. A high contrast ratio contributes to the sharpness of the image.

This was helpful (72) Read more

The menu won't appear in screen with my Panasonic projector, what should I do? Verified

Some Panasonic projectors have a function on the remote control that can hide the menu from the screen. Press the "On screen" button to restore the menu.

This was helpful (7) Read more