Home > Do-It-Yourself > Mitre Saws > Ozito Mitre Saws > Ozito SCMS-1621 Mitre Saw

Manual Ozito SCMS-1621 Mitre Saw

Name: Ozito SCMS-1621 Mitre Saw
Brand: Ozito
SKU: SCMS-1621
Rating: 100 (1 reviews)

Need a manual for your Ozito SCMS-1621 Mitre Saw? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 1 comment and has 1 vote with an average product rating of 100/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

DESCRIPTION OF SYMBOLS

SPARE PARTS

V Volts Hz Hertz

~ Alternating current W Watts

min¯ ¹ Revolutions or

reciprocation per minute

Double insulated

no No load speed

Warning Wear eye protection

Wear hearing protection

Wear safety gloves

Danger! Keep hands away

from blades

Read instruction manual

Regulator compliance mark

PROBLEM CAUSE REMEDY

No power at power point. Check power point switch On.

Cord not connected. Check that the cord is plugged in.

Low power supply or improper extension

cord.

Inspect power supply or power cords.

Worn or cracked Carbon Brushes. Inspect Carbon Brushes. Replace if damaged or

worn

Wood burns at

ends of cut.

Dirty blade Clean blade using blade cleaner or mineral

spirits.

Workpiece frays or

chips out

Finished side is down.

Blade chipped or dull.

Blade inappropriate for material.

Material is binding.

Workpiece is unsupported.

Check blade manufacture’s recommendations

for material being cut. For cross curtting

hardwood and for precision cuts use a thin kerf

blade with 60 or more teeth.

Use a thin piece of scrap materia, such as 6mm

plywood, underneath or behind the workpiece

to support the edges of the workpiece as it is

being cut..

Blade binds, slowing

or stopping saw

Check condition or workpiece and check

compatibility of blade to workpiece.

Workpiece is misaligned on the or ends are

not supported.

Workpiece must be ﬂat on table, ﬂush against

the fence and supported on both ends

Workpiece is wet, contaminated or

inappropriate blade is being used.

Depth Stop setting in use. Move Depth Stop to right to disengage.

Adjust Depth Stop Bolt for desired depth of

cut.

Mite Saw will not

start

Mitre Saw operates

sporadically or at low

power.

Blade does not

cut completely

through workpiece.

Depth Stop set too shallow.

Check position of workpiece on table. Material

must be ﬂat, ﬂush against fence and supported on

ends

Keep ﬁnished side of workpiece up or facing

operator

Check for damaged teeth. Sharpen or replace

blade

TROUBLESHOOTING

Limited spare parts are available subject to availability. Please

contact your local Bunnings Special Orders Desk to order the

required spare parts.

For further information, or any parts not listed here,

visit www.ozito.com.au or contact Ozito Customer Service:

Australia 1800 069 486

New Zealand 0508 069 486

E-mail: [email protected]

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of

with household waste but in an environmentally friendly way. Please

recycle where facilities exist. Check with your local council authority

for recycling advice.

Recycling packaging reduces the need for landll and raw materials.

Reuse of recycled material decreases pollution in the environment.

Please recycle packaging where facilities exist. Check with your

local council authority for recycling advice.

Rating

Let us know what you think about the Ozito SCMS-1621 Mitre Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Ozito SCMS-1621 Mitre Saw?
Yes No

100%

1 vote

Join the conversation about this product

Here you can share what you think about the Ozito SCMS-1621 Mitre Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Roger Masters 18-03-2022
How do you adjust the laser to align with the blade? The cut goes to the right of the blade every time. I have squared and set all adjustments for angles to 0.

reply | This was helpful (0)

More about this manual

We understand that it’s nice to have a paper manual for your Ozito SCMS-1621 Mitre Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Ozito. They might be able to provide an original manual. Are you looking for the manual of your Ozito SCMS-1621 Mitre Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Ozito
Model	SCMS-1621
Category	Mitre Saws
File type	PDF
File size	2.26 MB

All manuals for Ozito Mitre Saws
More manuals of Mitre Saws

Frequently Asked Questions about Ozito SCMS-1621 Mitre Saw

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Do I need to wear hearing protection when using a mitre saw? Verified

Yes you should. Although the amount of noise produced by a mitre saw can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (14) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (10) Read more