Home > Do-It-Yourself > Orbital Sanders > Ozito Orbital Sanders > Ozito ASR-150 Orbital Sander

Manual Ozito ASR-150 Orbital Sander

Need a manual for your Ozito ASR-150 Orbital Sander? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

DESCRIPTION OF SYMBOLS

SPARE PARTS

AIR RANDOM

ORBITAL SANDER

150mm (6”)

INSTRUCTION MANUAL

SPECIFICATIONS

ASR-150

Sanding Pad Size: 150mm (6”)

Max. Air Pressure: 91psi (6.3Bar)

Average Air Consumption: 113 l/min (4cfm)

No Load Speed: 10,000/min

Air Inlet: 1/4” BSP

Weight: 1.73kg

Spare parts can be ordered from the Special Orders

Desk at your local Bunnings Warehouse.

For further information, or any parts not listed here, visit

www.ozito.com.au or contact Ozito Customer Service:

Australia 1800 069 486

New Zealand 0508 069 486

Email: [email protected]

GENERAL AIR TOOL SAFETY WARNINGS

AIR SANDER SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings

refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust

or fumes.

c. Keep children and bystanders away while operating a power tool. Distractions can

cause you to lose control.

d. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewellery or long hair can be

caught in moving parts.

e. Check the maximum pressure rating of any tools or accessories that you intend using with

the compressor. The output pressure of the air from the compressor must be regulated so

that it never exceeds the rated pressure of the tool or accessory.

f. Always wear safety goggles or glasses when using the air compressor. Never point the

nozzle of an accessory towards any part of your body or towards another person.

g. Drain the moisture from the tank daily. It will help prevent corrosion.

h. Use safety equipment including safety goggles or shield, ear protection, breathing respirator

mask and protective clothing.

i. Air tools should not be used in a potentially explosive environment.

j. Use safety equipment including safety goggles or shield, ear protection, breathing or

respirator mask and protective clothing.

k. The tool must be used only for its prescribed purpose.

Any use other than those mentioned

in this Manual will be considered a case of misuse. The user and not the manufacturer

shall be liable for any damage or injury resulting from such cases of misuse.

WARNING!

In the event that an air line is cut or broken, the air supply must be turned off

at the compressor. A broken air line which is not supported is extremely dangerous and

can whip around very quickly, both with the capability of striking people, and blowing foreign

particles into the air.

Do not attempt to catch the air line but immediately keep bystanders well clear and turn off the air

supply to the hose, turn off the compressor at the On / Off button, and then remove the hose from

the compressor.

This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given the supervision or instruction concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Warning

Read instruction

manual

Wear eye protection

No load speed

Wear ear protection

Revolutions or

reciprocation per minute

/min

• Do not use sandpaper intended for larger sanding pads. Larger sandpaper will extend

beyond the sanding pad causing snagging, tearing of the paper or kick-back.

Extra paper extending beyond the sanding pad can also cause serious lacerations.

WARNING!

Some dust created by power sanding, sawing, grinding, drilling and other construction

activities contain chemicals known to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• Lead from lead-based paints;

• Crystalline silica from bricks, cement and other masonry products, and;

• Arsenic and chromium from chemically-treated timber.

Your risk from these exposures varies, depending on how often you do this type of work. To

reduce your exposure to these chemicals: work in a well ventilated area and work with approved

safety equipment, such as dust masks that are specially designed to filter out microscopic

particles.

1 Sanding Pad

2 Spindle

3 Air Regulator

4 On/Off Trigger

5 Handle

6 Air Inlet (1/4” Nitto Fitting)

KNOW YOUR PRODUCT

WARNING!

• Disconnect the sander before changing accessories. Accidental start-ups may

occur if the sander is plugged in while changing an accessory.

• Disposing of dust. Be extremely careful of dust disposal, materials in fine particle form

may be explosive. Do not throw sanding dust on an open fire. Spontaneous combustion, may

in time, result from a mixture of oil or water with dust particles.

• Always wear eye protection and a dust mask for dusty applications and when

sanding overhead. Sanding particles can be absorbed by your eyes and inhaled easily and

may cause health complications.

• Use special precautions when sanding chemically pressure treated timber, paint that

may be lead based, or any other materials that may contain carcinogens. A suitable

breathing respirator and protective clothing must be worn by all persons entering the work

area. Work should be sealed by plastic sheeting and persons not protected should be kept out

until work area is thoroughly cleaned.

• Do not ‘wet sand’ with this sander.

• Never place your hands near rotating components. Accessory may kickback over your

hand.

Rating

Let us know what you think about the Ozito ASR-150 Orbital Sander by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Ozito ASR-150 Orbital Sander?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Ozito ASR-150 Orbital Sander. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Ozito ASR-150 Orbital Sander. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Ozito. They might be able to provide an original manual. Are you looking for the manual of your Ozito ASR-150 Orbital Sander in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Ozito
Model	ASR-150
Category	Orbital Sanders
File type	PDF
File size	1.03 MB

All manuals for Ozito Orbital Sanders
More manuals of Orbital Sanders

Frequently Asked Questions about Ozito ASR-150 Orbital Sander

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

On what kind of materials can I use an orbital sander? Verified

Orbital sanders are generally used on wood, wood material and painted surfaces. These machines are less suited for metals and stone surfaces.

This was helpful (41) Read more

Do I need to wear eye protection when using a sander? Verified

Yes. Small particles can fly up during sanding. When these hit an eye they can cause permanent eye damage. That is why it always necessary to wear eye protection.

This was helpful (8) Read more

Do I need to wear hearing protection when using a sander? Verified

Yes you should. Although the amount of noise produced by a sander can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (3) Read more

Do I need to wear a dust mask when using a sander? Verified

Yes. Dust is released during sanding which can cause respiratory damage. Some surfaces can also release chemicals like paint or varnish during sanding. These are also a good reason to wear a dust mask.

This was helpful (3) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (2) Read more