Home > Camping & Outdoor > Tents > Outwell Tents > Outwell Michigan L Tent

Manual Outwell Michigan L Tent

Need a manual for your Outwell Michigan L Tent? Below you can view and download the PDF manual for free in English. This product currently has 8 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

UK Setting-up instructions

D Aufbauanleitung

DK Opstillingsvejledning

Tillykke med dit nye Outwell telt designet og udviklet

til at følge dig på store oplevelser ude i naturen.

Når du vælger din campingplads vil den ideelle plads

være et område, der er så jævnt og rent som muligt

og uden skarpe genstande som sten, kviste og grene.

Bred teltet ud og placer det med dørene i de ønskede

retninger. Undgå at placere teltet under træer. Opstil

teltet med enden op mod vindretningen - for bedste

vindstabilitet i blæsevejr.

Alle stængerne samles. Før opstilling af teltet skal

dørene åbnes for at få luft i teltet, så det er lettere

at rejse, hvorefter dørene lukkes. Før herefter alle de

forbøjede stålstængerne igennem deres farvemar-

kerede kanaler på taget af teltet og placere de lige

stålstænger på hver side for ende af kanalerne. Den

forbøjede samt den lige stålstang sættes nu sammen.

Teltet kan nu rejses, og til dette er det bedst, at man

er to personer.

Nu kan den lige stålstang sættes ned over metal-

pinden i ringen i den ene side, gå derefter til den

anden ende af stangen (eller få den anden person

til at gøre dette). Påsæt stålstangen nedover metal-

pinden i den side også. Dette gentages med de øvrige

sæt stålstænger, hvorefter krogene på teltet klemmes

om stålstængerne. Før de forbøjede Duratec stænger

igennem kanalerne ved kabinerne (OEF System) og

enderne sættes ned i plastikkopperne påmonteret

siderne af kabinerne.

Nu kan du så placere teltet som ønsket. Start med at

pløkke det fast i bardunlinerne i for- og bagende først.

Stram teltet ud i hjørnerne og fastgøre stropperne i

ringene med pløkke. Resten af stropperne fastgøres

med pløkke og teltet tilpasses/justeres. De sidste to

Duratec stænger monteres indvendigt i teltets loft i

et kryds henover midten. Stængerne placeres i ”lom-

merne” i loftets hjørner og velcrobåndet fastgøres

omkring stængerne.

Teltet skal nu fastgøres hele vejen rundt ved at pløkke

stropperne i ringene fast. Fastgør det medfølgende

underlag i vindfanget ved at pløkke det fast.

Til sidst stormsikres teltet ved at pløkke de for-

monterede barduner fast hele vejen rundt om teltet.

Pløkkerne fastgøres ved hjælp af en pløkhammer.

Ved nedtagning af teltet skal dørene åbnes, for at

man kan få luften ud af teltet, så det er lettere at

pakke sammen.

Se yderligere informationer og tips på

www.outwell.com

Congratulation on your new Outwell tent designed and

created to accompany you out into the great outdoors.

When selecting your campsite, the ideal place would

be an area as even and clean of rocks, branches and

other sharp objects as possible. Spread out the tent

and place it with the door in the desired direction,

avoid placing the tent directly under trees, and position

it with the end into the wind direction, for best results

in windy conditions.

Assemble all members of the steel and fibreglass poles.

Before setting-up the tent you should open the

doors to get air into the tent, then close the doors -

this will help you to set-up the tent more easily.

Push in all the curved steel poles in their pole sleeves

marked with matching colours on the roof of the tent

and position the straight poles at each side. Connect

the straight steel poles with the curved ones on both

sides. The tent can now be raised, for this you should at

least be two persons.

Place one end of the steel poles down over the metal

pin fastened in the ring. Go to the opposite end of the

pole (or have the second person doing this) and insert

that pole end over the other pin. Clamp the hooks on

the tent onto the steel poles. Repeat this with all poles.

Then push the curved fibreglass poles in their poles

sleeves of the OEF System into the plastic cups on the

walls of the side cabins. Now you are able to position

the tent, as you require, raise the tent and peg it down

using guy lines at back and front first. Pull the tent out

at the corners and peg it down through the straps

attached to the corners and rings. The remaining straps

and guys can now be adjusted and pegged down.

At last fasten the two shortest fibreglass poles inside

the tent on the centre roof across the middle. Insert the

ends of the poles in the pockets on the corners of the

roof and wrap the velcros around the poles.

Finally place the groundsheet in the porch area, peg it

down and secure the tent against strong winds with

the pre-attached guy lines and the pegs. Use a mallet

to secure the pegs.

When packing down the tent the doors should be

open to get the air out of the tent and make the

packing easier.

For more information and tips on maintenance go to

www.outwell.com

Kunststoffhaken an den senkrechten Metallstangen.

Spannen Sie nun mit dem gebogenen Glasfiberstangen

die Schlafkabinen durch die Kanäle und stecken Sie die

Enden in de Halterungen an den Seiten.

Nachdem Sie die Position des Zeltes überprüft haben,

richten Sie das Zelt auf durch Zug an den Sturmleinen

an der Vorder- und Rückseite des Zeltes. Ziehen Sie

dann die Ecken nach außen und sichern Sie das Zelt mit

Heringen an den Abspannschlaufen der Metallringe

und den Schlaufen am Überzelt.

Zuletzt befestigen Sie bitte die beiden kürzen Glas-

fiberstangen im Zelt in der Mitte gekreuzt unter dem

zentralen Dach. Stecken Sie dazu die Stangenenden in

die Taschen in den Ecken des Daches und schlingen Sie

die Klettbänder um die Stangen.

Befestigen Sie nun noch die Bodenplane im Windfang

und spannen Sie zum Schluss das Zelt mit den Sturm-

leinen ab zum Schutz vor starkem Wind. Zum Verankern

der Heringe benutzen Sie einen Camping-Hammer.

Lassen Sie zum Abbau des Zeltes die Eingänge geöffnet,

damit die Luft aus dem Zelt entwichen kann.

Weitere Tipps und Informationen finden Sie auf unsere

Homepage www.outwell.com

Wir wünschen Ihnen, dass Sie mit Ihrem neuen Outwell

Zelt viele schöne Urlaube verbringen werden.

Bei der Auswahl des Aufbauplatzes achten Sie bitte

darauf, dass er möglichst frei ist von Steinen, Ästen oder

anderen scharfkantigen Objekten, und vermeiden Sie,

das Zelt unter Bäumen aufzubauen. Breiten Sie das Zelt

aus, mit dem Eingang in der gewünschten Richtung

(alle Eingänge sollten geschlossen sein) und platzieren

Sie das Heck in Windrichtung für höhere Windstabilität.

Öffnen Sie die Eingänge des Überzeltes, damit beim

Aufbau Luft hineinströmen kann, dann schließen Sie

die Eingänge.

Setzen Sie als erstes die verbundenen

Stahl und Fiberglas Gestänge zusammen. Schieben

Sie nun die gebogenen Stahl Stangenteile in die am

Dach angebrachten Kanäle mit der jeweils übereinstim-

menden Farbmarkierung und legen Sie die geraden

Gestänge griffbereit an die Seiten des Zeltes. Das Zelt

kann jetzt aufgestellt werden, wobei eine zweite Person

sehr hilfreich ist.

Stecken Sie die geraden Stangen auf beiden Seiten

des Dachs in die gebogenen Stangen. Stecken Sie in

ein Ende der ersten Stange einen der Stifte, die sich

an den Metallringen befinden. Gehen Sie nun zum

anderen Ende des Gestänges und stecken Sie auch hier

den Stift in das Gestängeende. Befestigen Sie nun die

Rating

Let us know what you think about the Outwell Michigan L Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Outwell Michigan L Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Outwell Michigan L Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Outwell Michigan L Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Outwell. They might be able to provide an original manual. Are you looking for the manual of your Outwell Michigan L Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Outwell
Model	Michigan L
Category	Tents
File type	PDF
File size	0.09 MB

All manuals for Outwell Tents
More manuals of Tents

Frequently Asked Questions about Outwell Michigan L Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more