Home > Garden & Terrace > Water Computers > Orbit Water Computers > Orbit 94912 Water Computer

Manual Orbit 94912 Water Computer

Need a manual for your Orbit 94912 Water Computer? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

ENGLISH

Activating the Batteries

• Slide the docking port off the timer unit to gain access to the

battery compartment door.

• Slide the door off the battery compartment in the direction

of the arrow.

• Remove the black strip from the battery compartment.

• Replace the battery compartment door.

• Slide the docking port back onto the main controller unit.

The display will show “LOW BATTERY” when it is time to

replace the batteries.

NOTE: Batteries alone will not operate the valves in your sprinkling

system. The transformer must be plugged in and have power to oper-

ate your system normally.

Reset the Timer

If this is the rst time the sprinkler timer has been pro-

grammed, you should press the small recessed button labeled

RESET (located under the RAIN DELAY button). You will prob-

ably need a pen, pencil or similarly small object to push it.

Do not press the RESET button again unless you want to com-

pletely remove all your programming, including time and date.

If no programming occurs after the RESET button has been

pressed and the dial is left in the AUTO position the timer will

assume a default program mode. In default mode, the timer will

automatically water each station for 10 minutes, beginning at 5

a.m. each day.

Select the Preferred Language

• Turn the selection dial to BUDGETING/LANGUAGE.

• Press the RAIN DELAY button.

• Press the NEXT button until the desired language is

shown in the display.

• Exit the language selection mode by turning the selection dial

or pressing the RAIN DELAY button.

Set the Time of Day and Date

If this is the rst time the timer has been programmed, press

the small recessed RESET button.

• Turn the selection dial to TIME/DATE.

• The top line of the display reads “SET TIME.” Set the current

time by pressing either the or button.

NOTE: To move faster through the time or other selections, hold the

or buttons down, rather than merely pressing and releasing.

• Press the ENTER button. The display now reads “SET

YEAR.” Set the current year by pressing either the

or button.

Downloaded from www.Manualslib.com manuals search engine

Rating

Let us know what you think about the Orbit 94912 Water Computer by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Orbit 94912 Water Computer?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Orbit 94912 Water Computer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Orbit 94912 Water Computer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Orbit. They might be able to provide an original manual. Are you looking for the manual of your Orbit 94912 Water Computer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.