Home > Household appliances > Hobs > Omega Hobs > Omega OCG64FFX Hob

Manual Omega OCG64FFX Hob

Need a manual for your Omega OCG64FFX Hob? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

CONVERSIONS

8) UNIVERSAL LP GAS TO NATURAL GAS

CONVERSION PROCEDURE

Appliance models: Gas Vitroceramic hotplate

models:

1. Remove each burner cap and burner skirt.

2. Remove the Universal LP Gas main injector with

a 7 mm/VF tube spanner and replace with the

appropriate size Natural Gas injector for each

burner. The following injector sizes are required for

Natural Gas:

Burner Main injector

Wok 1.75 B mm

Rapid 1.55 mm

Semi Rapid Reduced 1.05 mm

Semi Rapid 1.20 mm

Auxiliary 0.90 mm

3. Shut off gas supply to the appliance.

4. Disconnect gas inlet pipe from the Universal LP

Gas test point inlet fitting.

5. Remove the Universal LP Gas test point inlet

fitting from the appliance.

6. Fit the Natural Gas Regulator supplied in the

conversion kit.

7. Connect the gas supply to the Regulator.

8. Check for gas leaks. Do not use a naked flame

to check for gas leaks.

9. Adjust the gas pressure to 1.00 kPa.

10. Remove the control knob, with a thin shaft blade

screwdriver down the centre of each gas valve

shaft, screw the by-pass injector anti-clockwise.

Test the appliance on both high and low flame for

each burner. If the burner fails to remain alight or

the flame is not stable on the simmer setting, adjust

the by-pass screw, until flame is stable.

11. If not already removed, remove the “Only for

use with Universal LP Gas” label adhered to the

bottom panel near the gas connection.

12. Fit the new data label included in the gas

conversion kit.

9) NATURAL GAS TO UNIVERSAL LP GAS

CONVERSION PROCEDURE

Appliance models: Gas Vitroceramic hotplate

models:

1. Remove each burner cap and burner skirt.

2. Remove the Natural Gas main injector with a 7

mm/VF tube spanner and replace with the

appropriate size Universal LP Gas main injector for

each burner. The following injector sizes are required

for Universal LP Gas:

Burner Main injector

Wok

1.00 B

Rapid 0.91 mm

Semi Rapid Reduced 0.60 mm

Semi Rapid 0.70 mm

Auxiliary 0.53 mm

3. Remove the control knob, with a thin shaft blade

screwdriver down the centre of each gas valve

shaft, screw the by-pass injector fully clockwise.

4. Shut off gas supply to the appliance.

5. Disconnect gas inlet pipe from the Natural Gas

Regulator.

6. Remove the Natural Gas Regulator from the

appliance.

7. Fit the Universal LP Gas test point inlet fitting

supplied in the conversion kit.

8. Connect the gas supply to the inlet fitting.

9. Check for gas leaks. Do not use a naked flame

to check for gas leaks.

10. Adjust the gas pressure to 2.75 kPa.

11. Test the appliance on both high and low flame

for each burner and check the gas pressure. If the

burner fails to remain alight or the flame is not

stable on the simmer setting, adjust the by-pass

screw, until flame is stable.

12. If not already removed, remove the “Only for

use with Natural Gas” label adhered to the bottom

panel near the gas connection.

13. Fit the new data label included in the gas

conversion kit.

Mod: OCG63FFX

3 Burners

Mod: OCG64FFX

4 Burners

Mod: OCG95FFX

5 Burners

Mod: OCG63FFX

3 Burners

Mod: OCG64FFX

4 Burners

Mod: OCG95FFX

5 Burners

Rating

Let us know what you think about the Omega OCG64FFX Hob by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Omega OCG64FFX Hob?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Omega OCG64FFX Hob. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Omega OCG64FFX Hob. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Omega. They might be able to provide an original manual. Are you looking for the manual of your Omega OCG64FFX Hob in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Omega
Model	OCG64FFX
Category	Hobs
File type	PDF
File size	1.24 MB

All manuals for Omega Hobs
More manuals of Hobs

Frequently Asked Questions about Omega OCG64FFX Hob

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Which pans can be used on an induction hob? Verified

In general all pans that are magnetic can be used on an induction hob. Almost all new pans are suited for induction.

This was helpful (1380) Read more

My hob has a power plug that doesn't fit a regular socket, what should I do? Verified

Many electric hobs (both ceramic and induction) have a different plug. This is because these appliances require a lot of power. Have the installation of the appliance done by a professional.

This was helpful (1308) Read more

Why does the ignition on my range make a clicking sound? Verified

If the range has ben cleaned with a lot of water, the knobs might have gotten wet, triggering the ignition. Let the knobs dry. If the problem persists you should contact the manufacturer.

This was helpful (1118) Read more