Home > Household appliances > Hobs > Omega Hobs > Omega OCG64FFX Hob

Manual Omega OCG64FFX Hob

Need a manual for your Omega OCG64FFX Hob? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

INSTALLATION

6) ELECTRICAL CONNECTION

The appliance is supplied with a 1800 mm long

flexible supply lead.

The point of attachment for this lead is located at

the rear and on the underside of the appliance

380 mm from the right hand side.

The voltage and power consumption are detailed on

the underside of the appliance. Ensure that the

appliance is correctly rated to the supply.

Connect appliance by way of a switched power

point.

THE APPLIANCE MUST BE EARTHED

Ensure that this power point is properly earthed.

Look at the connection wiring diagrams

(fig. A-B and C).

Warning: in order to avoid any hazard, any

electrical work performed on this equipment or

its associated wiring, should only be done by

persons a qualified by the supplier or similarly

qualified persons.

The socket outlet for this hotplate shall be

installed near the hotplate and shall be easily

accessible.

The electrical connections of the appliance

must be carried out in compliance with the

provisions and standards in force.

Before connecting the appliance, check that:

- The voltage matches the value shown on the

specification plate and the section of the wires of

the electrical system can support the load, which

is also indicated on the specification plate.

- The electrical capacity of the mains supply and

current sockets suit the maximum power rating of

the appliance (consult the data label applied to the

underside of the hotplate).

- The socket or system has an efficient earth

connection in compliance with the provisions and

standards in force. The manufacturer declines all

responsibility for failing to comply with these

provisions.

When the appliance is connected to the

electricity main by a socket:

- Fit a standard plug suited to the load indicated on

the data label to the cable.

- Fit the wires following figure “D” taking care of

respecting the following correspondences:

Letter L (live) = brown wire;

Letter N (neutral) = blue wire;

Earth symbol = green - yellow wire.

- The power supply cable must be positioned so that no

part of it is able to reach an overtemperature of 90 °C.

- Never use reductions, adapters of shunts for

connection since these could create false contacts

and lead to dangerous overheating.

When the appliance is connected straight to the

electricity main:

- Install an omnipolar circuit-breaker between the

appliance and the electricity main. This circuit-

breaker should be sized according to the load

rating of the appliance and possess a minimum 3

mm gap between its contacts.

- Remember that the earth wire must not be

interrupted by the circuit-breaker.

-The electrical connection may also be protected by

a high sensitivity differential circuit- breaker.

You are strongly advised to fix the relative yellow-

green earth wire to an efficient earthing system.

Before performing any service on the electrical

part of the appliance, it must absolutely be

disconnected from the electrical network.

If the installation requires modifications to

the home's electrical system or if the

socket is incompatible with the appliance's

plug, have changes or replacements

performed by professionally-qualified

person. In particular, this person must also

make sure that the section of the wires of

the socket is suitable for the power

absorbed by the appliance.

220-240 V~

FIG.A

FIG.B

FIG.C

Rating

Let us know what you think about the Omega OCG64FFX Hob by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Omega OCG64FFX Hob?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Omega OCG64FFX Hob. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Omega OCG64FFX Hob. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Omega. They might be able to provide an original manual. Are you looking for the manual of your Omega OCG64FFX Hob in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Omega
Model	OCG64FFX
Category	Hobs
File type	PDF
File size	1.24 MB

All manuals for Omega Hobs
More manuals of Hobs

Frequently Asked Questions about Omega OCG64FFX Hob

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Which pans can be used on an induction hob? Verified

In general all pans that are magnetic can be used on an induction hob. Almost all new pans are suited for induction.

This was helpful (1380) Read more

My hob has a power plug that doesn't fit a regular socket, what should I do? Verified

Many electric hobs (both ceramic and induction) have a different plug. This is because these appliances require a lot of power. Have the installation of the appliance done by a professional.

This was helpful (1308) Read more

Why does the ignition on my range make a clicking sound? Verified

If the range has ben cleaned with a lot of water, the knobs might have gotten wet, triggering the ignition. Let the knobs dry. If the problem persists you should contact the manufacturer.

This was helpful (1118) Read more