Home > Household appliances > Hobs > Omega Hobs > Omega OCG64FFX Hob

Manual Omega OCG64FFX Hob

Need a manual for your Omega OCG64FFX Hob? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

IMPORTANT: the appliance must be installed

following the manufacturer's instructions. The

manufacturer will not be liable for injury to

persons or animals or property damage caused

by an incorrect installation.

5) GAS CONNECTION

The gas connection is located in the rear and on

the right hand underside of these appliances:

24 mm (mod: OCG63FFX - OCG64FFX),

230 mm (mod: OCG95FFX).

There are two ways to carry out the connection to

the main gas line:

A. The hotplate can be connected with rigid pipe

as specified in AS/NZS 5601.

B. If installing with a hose assembly, install with a

hose assembly that complies with AS/ANZ 1869

(Australian Certified), 10 mm ID, class B or D, no

more than 1.2 m long and in accordance with

AS/NZS 5601. Ensure that the hose does not

contact the hot surfaces of the hotplate, oven,

dishwasher or any other appliance that may be

installed underneath or next to the hotplate. The

hose should not be subjected to abrasion, kinking

or permanent deformation and should be able to

be inspected along its entire length with the

hotplate in the installed position.

Unions compatible with the hose fittings must be

used and all connections tested for gas leaks.

The gas supply connection point must be

accessible with the appliance installed..

Warning: ensure that the hose assembly is

restrained from accidental contact with the flue or

flue outlet of an underbench oven.

Natural Gas

Natural Gas installations require the connection of

a gas regulator at the appliance. This regulator is

supplied with the appliance on purchase.

Assemble the regulator (noting the gas flow

direction) and transition pieces (supplied with the

appliance), in accordance with figure 7.

The transition piece on the supply side of the

regulator must be provided by the installer.

Liquified Petroleum Gas.

In a Universal LP Gas installation the gas

regulation is made at the gas cylinder and

regulation at the appliance is not required. To

connect supply to the appliance use transition

pieces as shown in

figure 8. These pieces are supplied with the

appliance on purchase.

WARNING:

THE BURNER FLAME MUST BE ADJUSTED BY

THE INSTALLER.

FAULTY INSTALLATION WILL NOT BE

COVERED UNDER WARRANTY.

THE APPLIANCE IS FACTORY SET FOR

NATURAL GAS. THE TEST POINT PRESSURE

SHOULD BE ADJUSTED TO 1.00kPa WITH THE

WOK BURNER OPERATING AT MAXIMUM.

INSTALLATION

FIG. 7

FIG. 8

Rating

Let us know what you think about the Omega OCG64FFX Hob by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Omega OCG64FFX Hob?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Omega OCG64FFX Hob. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Omega OCG64FFX Hob. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Omega. They might be able to provide an original manual. Are you looking for the manual of your Omega OCG64FFX Hob in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Omega
Model	OCG64FFX
Category	Hobs
File type	PDF
File size	1.24 MB

All manuals for Omega Hobs
More manuals of Hobs

Frequently Asked Questions about Omega OCG64FFX Hob

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Which pans can be used on an induction hob? Verified

In general all pans that are magnetic can be used on an induction hob. Almost all new pans are suited for induction.

This was helpful (1380) Read more

My hob has a power plug that doesn't fit a regular socket, what should I do? Verified

Many electric hobs (both ceramic and induction) have a different plug. This is because these appliances require a lot of power. Have the installation of the appliance done by a professional.

This was helpful (1308) Read more

Why does the ignition on my range make a clicking sound? Verified

If the range has ben cleaned with a lot of water, the knobs might have gotten wet, triggering the ignition. Let the knobs dry. If the problem persists you should contact the manufacturer.

This was helpful (1118) Read more