Manual Nûby My Bathtime Bath Thermometer

Need a manual for your Nûby My Bathtime Bath Thermometer? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

My Bathtime Clock & Thermometer has three different
functions, working as a clock, thermometer & timer to
keep bathtime safe and fun
.
THERMOMETER: Place in bath water. The top part of display will indicate the water temperature. It will display in
Celsius or Fahrenheit. To switch from one to other, push “min” and “sec” buttons at same time. The temperature of
the bath water should be approximately 98.6˚F/37˚C. If the light flashes green, the water is too cold. If the light flashes
red, the water is too hot. AUTO COUNT UP: When the sensor comes into contact with water, the timer will
automatically begin counting up, telling you how long your baby has been in bath. Never bathe an infant for longer
than 5 minutes. CLOCK: To set the time on clock, hold “set” button until hours begin blinking. Use (+) and (-)
buttons to set hours. Press “set” button again to set minutes. Press “set” a third time to set high temperature alarm.
Press “set” again to return to normal display mode. TIMER: To set the timer, press “set” button. Use “min” and
“sec” button to add minutes and seconds. Press “set” again to begin counting down. Timer will sound when
time expires. Press “set” button during count down to pause timer. Press “min” and “sec” buttons at same
time to clear timer. After the time has expired or been cleared the display will automatically return to clock
mode. WARNING: PREVENT DROWNING. ALWAYS keep bathing child within arm’s reach. WARNING:
Always use this product with adult supervision. KEEP BATTERY OUT OF CHILD’S REACH.
SWALLOWING BATTERY COULD BE FATAL. BATTERY SHOULD NOT BE CHARGED OR
PLACED INTO EXTREME HEAT AS IT MAY EXPLODE. Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. See
below battery replacement instructions. Please retain these instructions for future reference.
OPEN
Fig 1
Fig 2
Fig 3
To Replace Batteries: Use two 1.5V button cell (LR44) batteries or other equivalent. Use flat
head screwdriver to open battery cover [Fig 1]. Remove top battery [Fig 2]. Press lever to
release bottom battery [Fig 3]. Replace with 2 new batteries, positive polarity facing up.
Replace and fasten the cover securely.
E- Para remplazar las Baterías: Use dos baterías de 1.5 V de botón (LR44) o equivalentes.
Use un desarmador plano para abrir la tapa de las baterías (Fig 1). Quite la batería superior.
[Fig 2]. Presione la palanca para sacar la batería inferior [Fig 3]. Reemplace con dos baterías
nuevas con la polaridad hacia arriba. Reemplace y asegúrese de volver a colocar la tapa.
Flashes and beeps when water is too hot or too cold
3-in-1 clock, timer & thermometer
Fast & accurate easy to read LCD screen
Floats in water
Download manual in English (PDF, 0.35 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Nûby My Bathtime Bath Thermometer by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Nûby My Bathtime Bath Thermometer?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Nûby My Bathtime Bath Thermometer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Nûby My Bathtime Bath Thermometer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Nuby. They might be able to provide an original manual. Are you looking for the manual of your Nûby My Bathtime Bath Thermometer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Nuby
Model My Bathtime
Category Bath Thermometers
File type PDF
File size 0.35 MB

All manuals for Nûby Bath Thermometers
More manuals of Bath Thermometers

Frequently Asked Questions about Nûby My Bathtime Bath Thermometer

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What temperature should the bath be for my baby? Verified

The water of the bath should be 37°C. It is also best to have a room temperature of between 20°C and 25°C.

This was helpful (6) Read more
Manual Nûby My Bathtime Bath Thermometer

Related products

Related categories