Home > Computers & Software > CPU Coolers > Noctua CPU Coolers > Noctua NH-C12P CPU Cooler

Manual Noctua NH-C12P CPU Cooler

Need a manual for your Noctua NH-C12P CPU Cooler? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Thank you very much for choosing a Noctua

cooler. This manual will guide you through the

installation process step by step.

Noctua LGA775 Mounting-Kit

Installation Manual

NH-C12P-LGA775

Installation Manual

Required mounting parts (from the LGA775-bag):

the backplate’s screw sockets with the mainboard’s screw-

holes.

Step 3:

Attaching the fastening brackets to the heatsink

Now screw the mounting bars to the backplate using small

screws.

Tightly screw the fastening brackets to the base of the heatsink

using 4 short screws.

Step 4:

Applying thermal paste

If there are residual traces of thermal paste or thermal pads on

your CPU, please clean them off first.

Removing the mainboard

Step 1:

In case you want to use the NH-C12P on an assembled system,

you first have to remove the mainboard from the case as the

cooler has to be screwed together with the backplate on the

back side of the mainboard.

Prior to installing the cooler, please consult the compat-

ibility list on our website and verify that the cooler is fully

compatible with your motherboard.

Should you encounter any difficulties, please check the

FAQs on our website and don’t hesitate to contact our

support team at [email protected]. Noctua cannot

be held responsible for any damage or losses caused by

compatibility issues.

Multilingual versions of this manual are available on our

website: www.noctua.at

2x springscrews with

internal thread

2x short mounting bars

Required mounting parts (from the common parts bag):

2x LGA fastening brackets 4x self-adhesive washers

2x pressure springs8x short screws

Press a small drop (4-5mm diameter) of NT-H1 onto the cen-

tre of the heat-spreader.

Put the heatsink onto the CPU and turn it back and forth a few

times in order to spread the paste.

Caution: Take off the protection cover at the bottom side of

the heatsink first!

Caution: Applying too much thermal paste will lower the heat

conductivity and cooling performance!

Caution: The insulation of the LGA backplate has to face

the mainboard.

Step 2:

Attaching the backplate

Place the backplate on the back side of the mainboard, aligning

Orientation A Orientation B

Choose the alignment of the mounting bars according to the

desired final orientation of the cooler:

Caution: Make sure that the straight sides of the mounting

bars face the socket and the bulgings are pointing outwards.

Caution: Don’t forget to stick 4 self-adhesive washers to

the mounting brackets.

1x LGA backplate

Rating

Let us know what you think about the Noctua NH-C12P CPU Cooler by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Noctua NH-C12P CPU Cooler?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Noctua NH-C12P CPU Cooler. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Noctua NH-C12P CPU Cooler. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Noctua. They might be able to provide an original manual. Are you looking for the manual of your Noctua NH-C12P CPU Cooler in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.