Manual NiteRider Lumina 350 Bicycle Light

Manual

RIDING AT NIGHT

While a Lumina lighting system will improve your view, control

and enjoyment of night riding, please remember that cycling

at night is an inherently dangerous activity. In addition to using

your lighting system properly and riding with extreme caution,

NiteRider urges you to:

• Never ride alone.

• Always let someone know where you are going.

• Wear a helmet and reective clothing.

• Carry an auxiliary light and emergency supplies.

• Make sure the headlamp & mounting bracket is

securely fastened.

IMPORTANT INFORMATION !

LOCK THE HEADLAMP FOR TRANSIT

It is important to lock the headlamp and protect the switch

from being pressed while it is in transit. The headlamp can be

easily turned on if placed in something like a backpack, duffel

bag or suitcase. The headlamp gets hot while in operation. To

prevent potential damage from high heat or even re, it is very

important to put the headlamp in lock mode and protect the

switch from being pressed.

NiteRider will not be held responsible for damages to person

or property resulting from a failure to follow the ‘lock’ mode

instructions.

PROTECTING YOUR INVESTMENT

Properly charge your battery to maximize its lifespan. (See the

“Battery Charging and Care” section for detailed information)

The Lumina will perform in wet weather conditions, but

submerging it in water will damage the system.

SUPPORT

If you experience difculties during product installation

or operation, NiteRider provides free telephone support

on weekdays from 8:00 AM to 4:30 PM (Pacic Time) at

800.466.8366, ext 4.

You may also e-mail us at support@niterider.com.

WARRANTY

NiteRider stands behind its products with the following

warranties:

•Lifetime warranty on all mechanical components

•2 years on electrical components

•180 days on rechargeable batteries

To obtain warranty service, it is preferable to have your

original sales receipt. Contact the NiteRider customer

service department at 800.466.8366, ext 4 to obtain a

Return Merchandise Authorization (RMA) number. The RMA

number must be prominently displayed on the outside of your

package. The product must be properly packaged to prevent

damage in transit. For complete warranty information, please

visit our website at www.niterider.com.

The Lumina 700 will run up to:

The Lumina 550 will run up to:

The Lumina 350 will run up to:

The Lumina Flare will run up to:

RUN TIMES

Light Level

High

Med

Low

Walk

Light Level

High

Med

Low

Walk

Light Level

High

Med

Low

Walk

Light Level

High

Med

Low

Walk

Time*

1:30

3:00

5:30

18:00

Time*

1:30

3:00

5:30

18:00

Time*

2:00

4:00

6:00

21:00

Time*

1:30

3:00

5:30

18:00

Lumens

700

350

200

40

Lumens

550

250

150

40

Lumens

350

200

125

30

Lumens

650

350

200

40

*Run times are approximations and will vary.

Lumina Series

User Guide

NiteRider Technical Lighting Systems, Inc.

8295 Aero Place, Suite 200

San Diego, CA 92123

www.niterider.com

150-23219 - Rev A

Lumina: 350, 550,

Flare, 700

LUMINA FLARE OPERATION

The Lumina Flare headlamp is shipped in lock mode. In order

to use the headlamp it must be unlocked. To unlock the

headlamp, press and hold the power button for several

seconds until the power button turns, or ashes blue. Release

the power button.

The Lumina Flare has 5 front light modes - low, medium and

high beam - daylight ash mode and walk mode. Press and

release the headlamp power button to turn the light on. Cycle

through the three brightness levels by pressing and

releasing the power button.

To access the daylight visible ash mode and walk mode,

press and hold the power button for greater than 3 seconds

or until the headlamp begins to ash.

With the headlamp in ash mode, press and release the power

button to access walk mode. From walk mode you can return

to normal mode by pressing and releasing the power button.

To turn the front light off from either normal, ash, or walk

mode, press and hold the power button until the light turns off.

The Lumina Flare has 3 rear light modes – Flash Mode, Steady

High, Steady Low. To turn the rear light on, press and release

the rear lens. Cycle through the 3 modes by pressing and

releasing. To turn off the rear light, press and hold the rear lens

for 2 seconds.

Always put the light into lock mode during transport of the

headlamp. To put the headlamp in lock mode, press and hold

the power button for several seconds until the headlamp turns

off and continue holding the power button down through ash

mode until the power button turns or ashes red. Then let go

of the Power button and test to make sure the light is in Lock

Mode by tapping the power button. The light will not turn on if

the lock mode is engaged. To Unlock the lock mode- See step

#1 of OPERATION.

1.

2.

3.

4.

5.

6.

7.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your NiteRider Lumina 350 Bicycle Light. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact NiteRider. They might be able to provide an original manual. Are you looking for the manual of your NiteRider Lumina 350 Bicycle Light in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for NiteRider Bicycle Lights
More manuals of Bicycle Lights