Home > Audio, TV & Photo > Flashes > Nissin Flashes > Nissin Di466 FT Flash

Manual Nissin Di466 FT Flash

Need a manual for your Nissin Di466 FT Flash? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Fill-in reflector

Light diffusing panel

Wireless flash sensor

Flash head

AF-assist light

Accessories: Flash stand, Pouch

Pilot lamp (Test flash button)

On / Off switch (Press button)

Mode select button / indicator

(TTL→Manual→Slave 1→Slave 2)

Flash power level indication lamps (6 LEDs)

Flash power level select button

Lock ring

Mounting foot

Hotshoe contacts

Battery magazine

Nomenclature

Flash stand

Filter

guide

12-53

For 4/3 Digital Cameras

NOTE

Remove the battery magazine and

insert 4 x size AA batteries as shown

in the picture.

The battery compartment is designed

so that each cell is placed in same

direction to avoid the confusion in

poor light situation.

It is recommended to use all 4 batteries in same brand and type, and

replace them all at the same time. Wrong insertion of each cell does

not make electric contact.

+ / - symbol is clearly marked at the

battery compartment.

Place the battery magazine back

into the body.

x 4

Basic Operation

Inserting batteries

Mounting Di466 Four Thirds on the Camera

Removing Di466 Four Thirds from the Camera

NOTE

Before mounting or removing Di466 Four Thirds into or from the

camera, it is recommended to turn off the power switch of both Di466

Four Thirds and the camera.

Loosen the lock ring and slide the mounting foot of Di466 Four Thirds off

the hotshoe of the camera. Make sure to turn the lock ring all the way to

completely clear the lock pin off the hooking slot on the hotshoe.

Slide the mounting foot of Di466 Four

Thirds into the hotshoe of camera.

Turn the lock ring to loosen it as shown in

the picture.

Turn the lock ring to opposite direction

and tighten it.

Lock pin comes out to hook the foot at

the hotshoe for sure contact.

Turn on the flash unit

To save battery energy, the power is automatically turned off (to

stand-by mode), both in TTL mode & Manual Power mode, in about 2

minutes of idle use.

While Di466 Four Thirds is in the stand-by mode a Pilot lamp blinks

every 2 seconds showing the flash unit is in stand-by mode.

To turn on Di466 Four Thirds again, press the camera’s shutter button

halfway or press any button of the flash unit.

In case Di466 Four Thirds is not in use over 30 minutes, the unit is

completely turned off and shut out the current leakage from the

batteries.

To turn on Di466 Four Thirds again, take the first step of turning the

flash unit on.

In case of using Di466 Four Thirds as a slave flash (at slave mode*5),

Di466 Four Thirds will not go into the stand-by mode. It will however

automatically turn off when not used over 60 minutes.

*5: Slave mode : Refer instruction below.

Di466 Four Thirds has energy saving double power off function.

For a test flash, press the Pilot lamp. When using the test flash as an

open flash, please note that the reference guide number in this case is

G.No.10 (ISO 100).

To turn off the flash unit manually, press the On / Off switch for 2

seconds.

Press the On / Off switch and Pilot lamp

turns red showing the unit is turned on.

In a few seconds, the Pilot lamp turns

green. Di466 Four Thirds is ready to shoot.

Rating

Let us know what you think about the Nissin Di466 FT Flash by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Nissin Di466 FT Flash?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Nissin Di466 FT Flash. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Nissin Di466 FT Flash. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Nissin. They might be able to provide an original manual. Are you looking for the manual of your Nissin Di466 FT Flash in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Nissin
Model	Di466 FT
Category	Flashes
File type	PDF
File size	1.33 MB

All manuals for Nissin Flashes
More manuals of Flashes

Frequently Asked Questions about Nissin Di466 FT Flash

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the guide number? Verified

The guide number indicates the maximum amount of flash light that the flash can produce. A higher number means that the subject can be illuminated from a greater distance.

This was helpful (134) Read more