24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
User Manual2
Support and Community
Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à
https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR's Privacy Policy, visit
https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR's Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of
purchase within your return period.
Do not use this device outdoors. For products that support Power over Ethernet (PoE), the PoE source is intended
for intr
a building connection only.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz devices is prohibited on oil
pla
tforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while
flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or
communications with unmanned aircraft systems.
This switch is designed for indoor use only. If you want to connect to a device located outdoors, the outdoor device
must be pr
operly grounded and surge protected, and you must install an Ethernet surge protector inline between
the switch and the outdoor device. Failure to do so can damage the switch.
WARNING: Befor
e connecting this switch to outdoor cables or devices, see https://kb.netgear.com/000057103 for
safety and warranty information.
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.
Revision History
Publication
Part Number
Publish Date Comments
202-12021-06 September 2021 We removed “Managed Pro” from the product name.
202-12021-05 August 2021 We changed
Configure the CoS settings for an interface on page 301.
202-12021-04 April 2021
• We changed Chapter 1, Get Started to document the following:
- The new device UI login options for initial access to the device UI. (HTTP
rather than HTTPS is now the default protocol for access to the device UI.)
See
Access the switch on-network and connected to the Internet, Access
the switch off-network and not connected to the Internet, and
Credentials for the device UI.
- The new options to register the switch to activate your warranty. See
Register the switch.
- The new requirements to change the management mode. See
Change the
management mode of the switch.
Join the conversation about this product
Here you can share what you think about the Netgear GS728TPv2 Switch. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.