3
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging im-
properly or at temperatures outside the specied range
may damage the battery and increase the risk of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator
an electric shock.
• Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
• Use only sockets and other accessories spe-
cically designed for use on impact wrenches
and drivers. Other sockets and accessories might
shatter or break causing injury.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
•
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SPECIFICATIONS
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Cat. No. ..................................................... 2852-20
Anvil Type ...................................3/8" Square-Ring
Mode 1
No Load RPM ......................................... 0 - 575
Impacts per Minute .......................................450
Mode 2
No Load RPM ....................................... 0 - 2000
Impacts per Minute .....................................2900
Mode 3
No Load RPM ....................................... 0 - 2300
Impacts per Minute .....................................3200
Cat. No. ..................................................... 2860-20
Anvil Type ..................................... 1/2" Square-Pin
Mode 1
No Load RPM ....................................... 0 - 1700
Impacts per Minute .....................................2300
Mode 2
No Load RPM ....................................... 0 - 2100
Impacts per Minute .....................................2700
Mode 3
No Load RPM ....................................... 0 - 2400
Impacts per Minute .....................................3000
Cat. No. ..................................................... 2861-20
Anvil Type ...................................1/2" Square-Ring
Mode 1
No Load RPM ......................................... 0 - 510
Impacts per Minute .......................................420
Mode 2
No Load RPM ....................................... 0 - 2100
Impacts per Minute .....................................2700
Mode 3
No Load RPM ....................................... 0 - 2400
Impacts per Minute .....................................3000
FUNCTIONAL DESCRIPTION
1. 1/2" Square drive anvil with pin (2860-20)
2. LED
3. Control switch
4. Trigger
5. 3-Mode drive control
6. Belt clip
7. 1/2" Square drive anvil with ring (2861-20)
8. 3/8" Square drive anvil with ring (2852-20)
1
2
4
5
3
7
6
8
Join the conversation about this product
Here you can share what you think about the Milwaukee 2861-20 Impact Wrench. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.