Home > Miscellaneous > Tripods > Miller Tripods > Miller Solo 100 Tripod

Manual Miller Solo 100 Tripod

Need a manual for your Miller Solo 100 Tripod? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Remove tripod from carry bag, undo clip on leg strap and

stand on a level surface (if possible). Depending on

surface, screw out rubber foot for non-scratch contact

to interior or hard surfaces or screw in for a spike on

exterior soft surfaces such as dirt or sand.

Note: Leg angle adjusters are spring loaded and self

adjusting. Do not hold leg angle adjuster up while spreading

tripod legs as this may cause leg angle adjusters to operate

improperly and potentially damage the tripod.

Maximum Height

(Leg angle adjustment is not required)

1 Separate legs slightly so they are

parallel.

2 Working with each leg

individually, grip concentric locks

and release one turn (see leg

lock direction label on leg).

3 Extend to desired length and

turn each concentric lock to

engage firmly. Repeat process

for remaining legs.

4 Spread tripod legs (Fig. 2)

and adjust leg length to

ensure tripod bowl is

approximately level.

5 Level the fluid head using bubble level and ball

levelling feature of fluid head.

Minimum Height

Note: It is recommended that

minimum height position is used only

with legs at their shortest length.

1 Pull up leg angle adjuster until it locks into a raised

position (Fig. 3). Repeat for all three locks.

2 Holding one leg on the ground pull the remaining two

outward, spreading the tripod to its lowest position. Leg

angle adjuster will automatically engage the leg to hold

the tripod at its lowest height position (Fig. 4).

Tripod Setup

Fig 1 Collapsed

position

Fig 3 Leg angle adjuster

raised

Fig 4 Lowest height

position

Fig 2 Spread

position

Rating

Let us know what you think about the Miller Solo 100 Tripod by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Miller Solo 100 Tripod?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Miller Solo 100 Tripod. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Miller Solo 100 Tripod. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Miller. They might be able to provide an original manual. Are you looking for the manual of your Miller Solo 100 Tripod in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.