Home > Do-It-Yourself > Reciprocating Saws > Metabo Reciprocating Saws > Metabo CR 10DL Reciprocating Saw

Manual Metabo CR 10DL Reciprocating Saw

Need a manual for your Metabo CR 10DL Reciprocating Saw? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

English

WARNING:

Some dust created by power sanding, sawing,

grinding, drilling, and other construction activities

contains chemicals known [to the State of California]

to cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

●

Lead from lead-based paints,

●

Crystalline silica from bricks and cement and other

masonry products, and

●

Arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are

specially designed to filter out microscopic particles.

SPECIFIC SAFETY RULES AND SYMBOLS

1. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring.

Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

2. ALWAYS wear ear protectors when using the tool

for extended periods.

Prolonged exposure to high intensity

noise can cause hearing loss.

3. NEVER touch the blade with bare hands after operation.

4. Because the cordless reciprocating saw operates

by battery power, be aware of the fact that it can

begin to operate at any time.

5. When working at elevated locations, clear the area of

all other people and be aware of conditions below you.

6. NEVER touch moving parts.

NEVER place your hands, fingers or other body

parts near the tool’s moving parts.

7. NEVER operate without all guards in place.

NEVER operate this tool without all guards or safety

features in place and in proper working order. If

maintenance or servicing requires the removal of a

guard or safety feature, be sure to replace the guard

or safety feature before resuming operation of the tool.

8. Use right tool.

Don’t force small tool or attachment to do the job

of a heavy-duty tool.

Don’t use tool for purpose not intended —for

example— don’t use circular saw for cutting tree

limbs or logs.

9. NEVER use a power tool for applications other

than those specified.

NEVER use a power tool for applications other than

those specified in the Instruction Manual.

10. Handle tool correctly.

Operate the tool according to the instructions

provided herein. Do not drop or throw the tool.

NEVER allow the tool to be operated by children,

individuals unfamiliar with its operation or

unauthorized personnel.

11. Keep all screws, bolts and covers tightly in place.

Keep all screws, bolts, and plates tightly mounted.

Check their condition periodically.

12. Do not use power tools if the plastic housing or

handle is cracked.

Cracks in the tool’s housing or handle can lead to

electric shock. Such tools should not be used until

repaired.

13. Blades and accessories must be securely mounted

to the tool.

Prevent potential injuries to yourself or others. Blades,

cutting implements and accessories which have been

mounted to the tool should be secure and tight.

14. NEVER use a tool which is defective or operating

abnormally.

If the tool appears to be operating unusually,

making strange noises, or otherwise appears

defective, stop using it immediately and arrange

for repairs by a metabo HPT authorized service center.

15. Carefully handle power tools.

Should a power tool be dropped or struck against

hard materials inadvertently, it may be deformed,

cracked, or damaged.

16. Do not wipe plastic parts with solvent.

Solvents such as gasoline, thinner benzine, carbon

tetrachloride, and alcohol may damage and crack

plastic parts. Do not wipe them with such solvents.

Wipe plastic parts with a soft cloth lightly

dampened with soapy water and dry thoroughly.

17. ALWAYS wear eye protection that meets the

requirement of the latest revision of

ANSI Standard Z87.1.

18. ALWAYS be careful with buried object such as an

underground, wiring.

Touching these active wiring or electric cable with

this tool, you may receive an electric shock.

Comfirm if there are any buried object such as

electric cable within the wall, floor or ceiling where

you are going to operate here after.

19. Definitions for symbols used on this tool

V ............... volts

—

---

.............. direct current

no ............ no load speed

---/min ...... revolutions or reciprocation per minute

01Eng_CR10DL_US 10/9/12, 3:51 PM5

Rating

Let us know what you think about the Metabo CR 10DL Reciprocating Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Metabo CR 10DL Reciprocating Saw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Metabo CR 10DL Reciprocating Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Metabo CR 10DL Reciprocating Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Metabo. They might be able to provide an original manual. Are you looking for the manual of your Metabo CR 10DL Reciprocating Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Metabo
Model	CR 10DL
Category	Reciprocating Saws
File type	PDF
File size	2.22 MB

All manuals for Metabo Reciprocating Saws
More manuals of Reciprocating Saws

Frequently Asked Questions about Metabo CR 10DL Reciprocating Saw

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What can I use a reciprocating saw for? Verified

Because of the changable saw blade these saws are suited for almost all materials. They are often used for installation and sanitation.

This was helpful (42) Read more

Do I need to wear eye protection when using a reciprocating saw? Verified

Yes. Small particles can fly up during sawing. When these hit an eye they can cause permanent eye damage. That is why it always necessary to wear eye protection.

This was helpful (24) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (11) Read more