Home > Household appliances > Cooker Hoods > Maytag Cooker Hoods > Maytag UXT5230BDB Cooker Hood

Manual Maytag UXT5230BDB Cooker Hood

Need a manual for your Maytag UXT5230BDB Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

Tools needed

Parts supplied

Remove parts from package. Check that all parts are included.

Parts needed

For 7" (17.8 cm) round vented installations

For 3¹⁄₄" x 10" (8.3 x 25.4 cm) rectangular vented installations

Optional accessories

*For information on ordering, see the “Assistance or Service”

section.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

■ It is the installer’s responsibility to comply with installation

clearances specified on the model/serial rating plate. The

model/serial rating plate is located inside the range hood on

the left wall.

■ Range hood location should be away from strong draft areas,

such as windows, doors and strong heating vents.

■ Cabinet opening dimensions that are shown must be used.

Given dimensions provide minimum clearance. Consult the

cooktop/range manufacturer installation instructions before

making any cutouts.

■ This range hood is recommended for use with cooktops with

a maximum total rating of 50,000 Btus or less.

■ Grounded electrical outlet is required. See “Electrical

Requirements” section.

■ All openings in ceiling and wall where range hood will be

installed must be sealed.

■ These range hoods are factory set for vented installations.

Models that are capable of being installed as non-vented

(recirculating) require charcoal filters. See the “Assistance or

Service” section for information on ordering charcoal filters.

For Mobile Home Installations

The installation of this range hood must conform to the

Manufactured Home Construction Safety Standards, Title 24

CFR, Part 328 (formerly the Federal Standard for Mobile Home

Construction and Safety, title 24, HUD, Part 280) or when such

standard is not applicable, the standard for Manufactured Home

Installation 1982 (Manufactured Home Sites, Communities and

Setups) ANSI A225.1/NFPA 501A, or latest edition, or with local

codes.

Caulking gun and weatherproof

caulking compound

Jigsaw or keyhole saw

Flat-blade

screwdriver

Drill with ¹⁄₈"

(3 mm), ¹⁄₂"

(13 mm)

and 1¹⁄₄"

(3 cm) bits

Wire stripper

#2 Phillips

screwdriver

Metal snips

Pencil

3¹⁄₄" x 10" (8.3 x 25.4 cm)

rectangular damper

#8-18 x ⁵⁄₈"

(4.2 x 16 mm)

truss-head screws

#8-18 x 1"

(4.2 x 25 mm)

flat-head screws

Drywall

anchors

Mounting

brackets

Short Phillips

head screws

Torx T10 adapter

®†

UL Listed/CSA Approved

wire connectors

UL Listed/CSA Approved

¹⁄₂" (13 mm) strain relief

†®TORX and T10 are registered trademarks of Acument Intellectual Properties, LLC.

7" (17.8 cm)

round

metal vent

system with

wall or roof cap

7" (17.8 cm)

round damper

Part Number

W10355451*

Vent clamps as

required

7" (17.8 cm)

round vent

mounting plate

Part Number

W10388168*

¹⁄₄" x 10"

(8.3 x 25.4 cm) rectangular

metal vent system with

wall or roof cap

Duct tape

Charcoal

filter kit

Part Number

W10386873*

Power

cord kit

Part Number

W10355452*

Stainless steel

cleaner and

polish

Part Number

31462A*

Rating

Let us know what you think about the Maytag UXT5230BDB Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Maytag UXT5230BDB Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Maytag UXT5230BDB Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Maytag UXT5230BDB Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Maytag. They might be able to provide an original manual. Are you looking for the manual of your Maytag UXT5230BDB Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Maytag
Model	UXT5230BDB
Category	Cooker Hoods
File type	PDF
File size	5.11 MB

All manuals for Maytag Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about Maytag UXT5230BDB Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1215) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (635) Read more