Home > Do-It-Yourself > Rotary Hammers > Makita Rotary Hammers > Makita HR2020X Rotary Hammer

Manual Makita HR2020X Rotary Hammer

Need a manual for your Makita HR2020X Rotary Hammer? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

ENGLISH

Explanation of general view

1 Grip base

2 Side grip (auxiliary handle)

3Teeth

4 Protrusions

5 Loosen

6Tighten

7 Bit shank

8Bit grease

9Bit

10 Chuck cover

11 Depth gauge

12 Switch trigger

13 Lock button

14 Reversing switch lever

15 Action mode changing knob

16 Blow-out bulb

17 Dust cup

18 Chuck adapter

19 Keyless drill chuck

20 Sleeve

21 Ring

22 Tighten

23 Loosen

SPECIFICATIONS

Model HR2020/HR2020X HR2021 HR2022

Capacities

Concrete

Tungsten-carbide tipped bit....................... 20mm 20mm 20mm

Core bit ..................................................... 54mm 54mm 54mm

Diamond core bit (dry type) ...................... 65mm 65mm 65mm

Wood .......................................................... 32 mm 32 mm 32 mm

Steel ........................................................... 13 mm 13 mm 13 mm

No load speed (min

-1

) .................................... 0 – 1,050 0 – 1,050 1,050

Blows per minute ........................................... 0 – 4,050 0 – 4,050 4,050

Overall length ................................................ 352 mm 352 mm 352 mm

Net weight ...................................................... 2.3 kg 2.3 kg 2.3 kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for hammer drilling and drilling in

brick, concrete and stone. It is also suitable for drilling

without impact in wood, metal, ceramic and plastic.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

ADDITIONAL SAFETY RULES

ENB010-1

1. Hold tools by insulated gripping surfaces when

performing an operation where the cutting tool

may contact hidden wiring or its own cord. Con-

tact with a “live” wire will make exposed metal parts

of the tool “live” and shock the operator.

2. Wear ear protertors when using the tool for

extended periods. Prolonged exposure to high

intensity noise can cause hearing loss.

3. Wear a hard hat (safety helmet), safety glasses

and/or face shield. It is also highly recom-

mended that you wear a dust mask, and thickly

padded gloves.

4. Be sure the bit is secured in place before opera-

tion.

5. Under normal operation, the tool is designed to

produce vibration. The screws can come loose

easily, causing a breakdown or accident. Check

tightness of screws carefully before operation.

6. In cold weather or when the tool has not been

used for a long time, let the tool warm up for a

while by operating it under no load. This will

loosen up the lubrication. Without proper warm-

up, hammering operation is difficult.

7. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

8. Hold the tool firmly with both hands.

9. Keep hands away from moving parts.

10. Do not leave the tool running. Operate the tool

only when hand-held.

11. Do not point the tool at any one in the area when

operating. The bit could fly out and injure some-

one seriously.

12. Do not touch the bit or parts close to the bit

immediately after operation; they may be

extremely hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Side grip (auxiliary handle) (Fig. 1)

Always use the side grip to ensure operating safety.

Install the side girp so that the teeth on the grip fit in

between the protrusions on the tool barrel. Then tighten

the grip by turning clockwise at the desired position. It

may be swung 360° so as to be secured at any position.

Download manual in English (PDF, 0.65 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Makita HR2020X Rotary Hammer by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Makita HR2020X Rotary Hammer?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Makita HR2020X Rotary Hammer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Makita HR2020X Rotary Hammer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Makita. They might be able to provide an original manual. Are you looking for the manual of your Makita HR2020X Rotary Hammer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Makita
Model	HR2020X
Category	Rotary Hammers
File type	PDF
File size	0.65 MB

All manuals for Makita Rotary Hammers
More manuals of Rotary Hammers

Frequently Asked Questions about Makita HR2020X Rotary Hammer

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the difference between an impact drill and a rotary hammer? Verified

Impact drills can be used for drilling holes in bricks and mortar walls. For drilling holes in concrete walls you need a rotary hammer.

This was helpful (260) Read more

What does Joule (J) mean in relation to rotary hammers? Verified

The number of Joule is an indication of the impact energy of the rotary hammer. To drill regular holes in concrete, a rotary hammer with 2.2J is sufficient.

This was helpful (219) Read more

Do I need to wear hearing protection when using a drill? Verified

Yes you should. Although the amount of noise produced by a drill can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (138) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (69) Read more