Home > Do-It-Yourself > Angle Grinders > Makita Angle Grinders > Makita GA7061 Angle Grinder

Manual Makita GA7061 Angle Grinder

Need a manual for your Makita GA7061 Angle Grinder? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

5 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: GA7061 GA7061R GA9061 GA9061R

Wheel diameter 180mm 230mm

Max. wheel thickness 6.5mm

Spindle thread M14 or M16 or 5/8″ (country specic)

Rated speed (n) 8,500min

-1

6,600min

-1

Overall length 450mm

Net weight 5.5kg 5.7kg

Safety class

/II

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

For public low-voltage distribution

systems of between 220 V and 250 V

Only for model GA7061 / GA9061

Switching operations of electric apparatus cause volt-

age uctuations. The operation of this device under

unfavorable mains conditions can have adverse effects

to the operation of other equipment. With a mains

impedance equal or less than 0.24 Ohms it can be pre-

sumed that there will be no negative effects. The mains

socket used for this device must be protected with a

fuse or protective circuit breaker having slow tripping

characteristics.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Model GA7061

Sound pressure level (L

) : 91 dB(A)

Sound power level (L

) : 102 dB (A)

Uncertainty (K) : 3 dB(A)

Model GA7061R

Sound pressure level (L

) : 91 dB(A)

Sound power level (L

) : 102 dB (A)

Uncertainty (K) : 3 dB(A)

Model GA9061

Sound pressure level (L

) : 91 dB(A)

Sound power level (L

) : 102 dB (A)

Uncertainty (K) : 3dB(A)

Model GA9061R

Sound pressure level (L

) : 91 dB(A)

Sound power level (L

) : 102 dB (A)

Uncertainty (K) : 3dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745:

Model GA7061

Work mode: surface grinding with normal side grip

Vibration emission (a

h, AG

) : 7.0 m/s

Uncertainty (K) : 1.5 m/s

Work mode: surface grinding with anti vibration side grip

Vibration emission (a

h, AG

) : 6.5 m/s

Uncertainty (K) : 1.5 m/s

Work mode: disc sanding with normal side grip

Vibration emission (a

h, DS

) : 2.5 m/s

Uncertainty (K) : 1.5 m/s

Work mode: disc sanding with anti vibration side grip

Vibration emission (a

h, AG

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

Model GA7061R

Work mode: surface grinding with normal side grip

Vibration emission (a

h, AG

) : 7.0 m/s

Uncertainty (K) : 1.5 m/s

Work mode: surface grinding with anti vibration side grip

Vibration emission (a

h, AG

) : 6.5 m/s

Uncertainty (K) : 1.5 m/s

Work mode: disc sanding with normal side grip

Vibration emission (a

h, DS

) : 2.5 m/s

Uncertainty (K) : 1.5 m/s

Work mode: disc sanding with anti vibration side grip

Vibration emission (a

h, AG

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

Model GA9061

Work mode: surface grinding with normal side grip

Vibration emission (a

h, AG

) : 6.5 m/s

Uncertainty (K) : 1.5 m/s

Work mode: surface grinding with anti vibration side grip

Vibration emission (a

h, AG

) : 5.5 m/s

Uncertainty (K) : 1.5 m/s

Rating

Let us know what you think about the Makita GA7061 Angle Grinder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Makita GA7061 Angle Grinder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Makita GA7061 Angle Grinder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Makita GA7061 Angle Grinder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Makita. They might be able to provide an original manual. Are you looking for the manual of your Makita GA7061 Angle Grinder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Makita
Model	GA7061
Category	Angle Grinders
File type	PDF
File size	5.94 MB

All manuals for Makita Angle Grinders
More manuals of Angle Grinders

Frequently Asked Questions about Makita GA7061 Angle Grinder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

On which materials can I use my angle grinder. Verified

Angle grinders are most suited for use on metal or stone. The machines generate a lot of heat and are therefore less suited for use on wood or plastic.

This was helpful (63) Read more

Do I need to wear hearing protection when using an angle grinder? Verified

Yes you should. Although the amount of noise produced by an angle grinder can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (16) Read more

Do I need to wear eye protection when using an angle grinder? Verified

Yes. Small particles can fly up during grinding. When these hit an eye they can cause permanent eye damage. That is why it always necessary to wear eye protection.

This was helpful (14) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (7) Read more