EZMOUNT manual
14
80G
160.0 mm
420.0 mm
6
Using The Headrest Mount
1. Before setting up your EZMOUNT, park your car in a safe location.
Install the cradle on top of the base and slide it down until it clicks
and locks into place.
2. Raise your car’s head rest up so the metal posts are exposed.
7
Using The Headrest Mount
3. Loosen the clamp by turning the knob counterclockwise. Fit
the clamp to the desired spot of post.
8
Using The Headrest Mount
4. Then rotate the knobs clockwise to tighten the clamp so
there is a firm hold.
9
Using The Headrest Mount Using In The Microphone Stand Pole
5.Loosen the ball-joint with the cap by rotating it counter clockwise.
(1) You can now freely adjust the cradle for a better view of tablet in
angle, or change between vertical and horizontal view. Turn the
cap clockwise to tighten the cradle.(2)
6. You can install EZMOUNT on any pole such as a microphone
stand. Installation procedures are the same as the headrest
mount.
10
Using The EZMOUNT
7. Press the cradle release button (1) and slide up the cradle grip to
adjust to the width for your device (2). You can also extend the base
to accommodate larger devices like tablets (3). Place your device in
the cradle (4).
11
Using The EZMOUNT
8. It is ready to use.
POLE MOUNT FOR TABLETS
AND SMARTPHONES
User’s Guide
www.macally.com
1
Package Contents
Introduction
Macally Product Information
• EZMOUNT
• User’s Guide
Thank you for purchasing the Macally Single Pole Mount for
Tablets, Smartphones, eReader, Apple iPad, iPhone and
Samsung Galaxy Tab etc.. The mounting clamp can be securely
attached to a post up to 0.75" (16 mm) diameter such as a car headrest
post, or a microphone stand pole.
Before you begin using this product, be sure to read this manual in
its entirety.
Technical Support
Please E-mail us at techsupport@macally.com,
In U.S.A. please call 1-909-230-6888
Mon-Fri 8:30 AM - 5:30 PM, Pacific Standard Time
Macally Product Information
Warranty
Macally peripherals warrants that this product will be free from
defects in title, materials and manufacturing workmanship for one
year from the date of purchase. If the product is found to be
defective then, as your sole remedy and as the manufacturer’s
only obligation, Macally will repair or replace the product. This
warranty shall not apply to products that have been subject to
abuse, misuse, abnormal electrical or environmental conditions,
or any condition other than what can be considered as normal use.
Limitation of Liability
The liability of Macally Peripherals arising from this warranty and
sale shall be limited to a refund of the purchase price. In no event
shall Macally Peripherals be liable for costs of procurement of
substitute products or services, or for any lost profit, or for any
consequential, incidental, direct or indirect damages, however
caused and on any theory of liability, arising from this warranty
and sale. These limitations shall apply not with standing any failure
of essential purpose of any limited remedy.
Copyright® 2018 by Macally Peripherals
4
Specifications
• Suitable for various models of iPad, Cell phone, iPhone, iPod, MP3
& GPS
• Maximum holding device width: 8 Inches
• Minimum holding device width: 3 1/2 Inches
5
Hardware Basics
2
1
3
4
5
Cradle base
Cradle (holder)
Clamp knob Pole clamp
Holder grip
release button
Ball-joint cap
Detaching button
1
2
Join the conversation about this product
Here you can share what you think about the Macally EZMOUNT Phone Mount. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.