Manual Lorus Z019 Movement

Manual

■

CHARACTERISTICS

u Pedometer

• Range:0-999999steps

• Distancedisplay:0-9999.99km/0-9999.99

miles

• Calorimeter:0-99999.9kcal

• Duration:0-1440minutes(23hours59

minutes59seconds)

• Targetstepcount:Beepsuponcompletion

• Personalcalibration:Bodyweight,stride

length

• Pedometerinstrument:Accelerometer

u Automatic calendar adjustmentbetween

2011and2099(year,month,day,hour,minute,

second)

u 12/24-hour indication format

u

Hourly chime

u Daylight saving time setting

u Stopwatch

Maximumrange:23hours59minutes59

seconds

Splitintervalfunction(SPL)

u Record archive functionwhichallowsusersto

storeupto30entrieswhereeachindividual

entrycanberecalledforevaluation.Users

mayalsochoosetodeleteindividualentries

orerasetheentirearchive.

u Daily and one-time alarm settings

u

Low battery detection

u Key tone settings:Usersmaychooseto

deactivatethekeytonefunctionwhen

operatinginsituationsthatrequirelownoise

levels

• EL Backlight

:3secduration

■

CLOCK

■

PEDOMETER

GENERAL OPERATIONS

1) AUTO-RETURN

• Whileinarchiveandalarmmode,ifnooperation

within2minutes,thewatchwillautomatically

returntohomescreen.

• Whileinsettingmenu(digitsflashing),ifno

operationwithin2minutes,thewatchwill

automaticallyexitthesettingmenu.

2) DEFAULT SCREEN

Wheneverentering dailyrecordingand archive

mode, the last recordingswhen existed will show

first.

S1

S2

S4

S3

SECONDS DISPLAY*

NOTE:

• Ifthewatchissettothe12-hourindication

format,the‘PM’symbolwillappearonlyinthe

S1

S2

S4

S3

SECONDS DISPLAY*

REAL TIME

[HH:MM]

STEP COUNT/CALORIES/

DISTANCE TRAVELLED/

ELAPSED TIME

ACTIVATING PEDOMETER

1. PressS1tobeginrecordingyourmovement,and

pressagaintostoprecording.

 Theflashing indicatesthatthepedometer

isactive.

NOTE:

Ifno movementis registeredonthepedometer

for5minutes,thepedometerwillbeautomatically

deactivatedtoreducebatteryconsumption.

KEEPING TRACK OF STEP COUNT, CALORIES BURNED,

DISTANCE AND ELAPSED TIME.

1. Press S2 to cycle through the following

measurements:Stepcount,calories,distance

andelapsedtime.

2. Whenthepedometerisinactive,holdS2for2

secondstoresetallcounters.

TROUBLESHOOTING

Q1

Why can’t I set a target step count, unit, stride

length and/or weight?

A1

It is not allowed to set personal information

after step count activated. Please set up

correct personal information first before

step count, as it affects distance and

calories counting.

Q2

Why does the alarm cause my pedometer

to malfunction during operation?

A2

Step counting will stop when alarm or

countdown alarm rings.

Q3

The distance recorded on my pedometer

doesn’t match at all. Is my pedometer

broken?

A3

The distance is calculated upon your

steps and stride length. Please check if

the correct stride length is set.

Q4

I noticed that the pedometer has the

tendency to register sudden increases in

step count, why is this?

A4

The pedometer may not be able to

register movement with complete

precision at all times, but it has a built in

function that allows it to try and account

for any discrepancies in its measurements

which is why you will notice certain spikes

in your recording.

Q5

The number of steps recorded doesn’t seem

to be accurate at all.

A5

There are two possible causes for this

problem:

The pedometer is only intended for

measuring basic movements such as

walking and/or jogging. Therefore, it is

unlikely to produce reliable data when

measuring activities which involve

sprinting.

The pedometer’s operation is based on

principles of biomechanics, specifically

on how people’s arms behave during

movement. If your arms are moving

excessively during exercise then there

is a possibility that it may affect the

pedometer’s measurements.

afternoon.Ifthe‘PM’symbolisn’tvisible,itmeans

thewatchissettoAMtime/24hourtimeformat.

• Thewatchhasabuilt-incalendarwhichisfully

automatedwhichiscapableofadjustingto

leapyears.

NREZ019

10-2012

CAL. Z019 (R 23 SERIES)

NOTE:

• Thevaluesthatappearonthesecondroware

actuallythecumulativesumfromallprevious

recordingsessionsandwillremainuntilthe

pedometerisreset.

• Ifyouhavealreadysetadesignatedsumasyour

dailyobjective,thepedometerwillnotifyyouof

yourprogressinincrementsof10%andyouwill

hearabeepingsound.

• Thewatchwillproduceacontinuousbeeping

soundfor20secondsandtheprogressbar

willbegintoflashuponcompletionofyour

designatedobjective.Toproceed,simplypress

anybuttontostopthebeeping.

SETTING UP YOUR PEDOMETER

1. Inpedometermode,holdS4untilthenumber

displaystartsflashing.

2. PressS3tocyclethroughthefollowingvariables:



 Targetstepcount⇨ Unit(metric/imperial)⇨

Stridelength⇨ Bodyweight

3. AdjustthevaluesofeachvariableusingS1&S2.

4. PressS4tosaveandexistsettingmenu.

■

DISPLAY OVERVIEW

DATE

TIME

Button Primary Function

S1

Start/Stop

Stopwatch:Start/Pause

Pedometer:Start/Stoprecording

Menusetting:+value(Holdforrapid

increase)

S2

Reset

Stopwatch:Reset

Menusetting:-value(Holdforrapid

decrease)

S3

Mode

Modeselection

Menunavigation

S4

Enter/

ELbacklight

ELbacklight

Holdfor2seconds:Settingsmenu

Menuscreen:Saveandreturntothe

previousmenu

S1

S2

S4

S3

MODE SELECTION

Thepedometerwatch provides6modesof

function.Theyarelistedinthefollowing order.

PressS3tocyclethrougheachmode.

Holdbutton S3 down for2 seconds to return to

thehomescreen.

DAILY TARGET PROGRESS BAR**

* SECONDS DISPLAY:Whenthe“:”symbol

isflashing,itisanindicationoftheseconds

passing.

** DAILY TARGET PROGRESS BAR

:eachsegmentof

thebarrepresents10%progress.

BUTTON FUNCTIONS

S1

 Alternatesbetweenstandardtimeanddaylight

savingtime

S2 Turnon/offhourlychime

S3 Modeselection

S4ELBlacklight,clocksettings

SETTING THE TIME AND DATE

1. Whileinclockmode,holdS4for2secondsor

untilnumbersstarttoflash.

2. PressS3tohighlighttheunityouwishtoadjust.

3. SetthevalueoftheselectedunitusingS1and

S2.

4. Onceyou’vesetyourwatchtothecorrecttime,

pressS4tosaveyoursettings.

NREV019.indd 1 12/07/25 15:48

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Lorus Z019 Movement. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Lorus. They might be able to provide an original manual. Are you looking for the manual of your Lorus Z019 Movement in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Lorus Movements
More manuals of Movements

Frequently Asked Questions about Lorus Z019 Movement

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.