Manual Lorus Z017 Movement

Manual

■

CHARACTERISTICS

1. Time/Calendar Display: Hour, minute, second,

month, date and day of the week.

2. Time Indication: Choice of 12-hour display

format with PM indicator or 24-hour display

format is available.

3. Stopwatch: The stopwatch can measure up

to 23 hours 59 minutes and 59 seconds in 1/100-

second increments. Lap time measurement is

available.

4. Timer: The countdown timer can be set up to 23

hours 59 minutes and 59 seconds.

5. Daily Alarm: The alarm can be set to sound at

the designated time on a 24-hour basis.

6. Second Time Zone: Time in a different time zone

can be displayed.

7. Chime: The chime can be set to sound every

hour on the hour with a single beep.

8. Illuminating Light: The built-in electro-

luminescent (EL) light evenly illuminates the

display for easy viewing in darkness.

■

BUTTONS AND DISPLAYS

■

HOW TO SET THE TIME/CALENDAR

■

HOW TO USE THE STOPWATCH

1. From the NORMAL TIME mode, press

S2

once

to change the display to the TIME/CALENDAR

SETTING mode. (The second digits start flashing.)

2. <Second setting>

Press

S1

in accordance with a time signal.

The second digits are reset to“00” and start

counting immediately.

When the second digits count any number

from “30” to “59” and

S1

is pressed, one

minute is added and the seconds are

immediately reset to “00.”

3. Press

S3

to confirm the second setting and move

on to the next item.

Selection of the item to be adjusted (flashing) is

made in the following order when

S3

is pressed.

*Choice of 12-Hour/24-Hour format

The time display format in either 12-hour

indication or in 24-hour indication can be

selected alternately by pressing

S1

. Under the

12-hour indication format, “PM” mark appears in

the afternoon, but no AM mark appears in the

morning. Under the 24-hour indication format,

no mark appears on the display.

* Measurement and release of lap times can be

repeated when

S2

is pressed.

* When

S2

is pressed, the display changes to show

the current lap time and total time from START for 3

seconds, and then it automatically returns to show

the ongoing measurement.

From the NORMAL TIME mode, press

S3

to go to the

STOPWATCH mode. The STOPWATCH mode indicator

“SP” appears on the display.

STOPWATCH OPERATION

Standard Measurement

Lap Time Measurement

Start

Lap 1

Last lap

Stop

S1

S2

S2

S2

S1

Lap 2

Reset

S2

S1

Start

Stop

Reset

S1

S2

(to its starting value)

NREZ017

3-2012

CAL. Z017 (R23 SERIES)

Press

S2

to reset the stopwatch.

Press

S3

to return to the NORMAL TIME mode.

4. To set the digits for each item, press

S1

. One digit

(flashing) is increased with each pressing of

S1

.

To move the digits quickly, keep

S1

pressed.

5. After all the adjustments are completed, press

S2

to return to the NORMAL TIME mode.

How to stop the alarm while sounding

The alarm sounds for 20 seconds at the designated

time. To stop it manually while sounding, press

S1

,

S2

or

S3.

Note: The alarm can be set only in one time

zone.

STOPWATCH

STOPWATCH mode indicator

STOP

LAP TIME DISPLAY

**Calendar display

To view the calendar (month and date), keep

pressing down

S1

in the NORMAL TIME mode.

*

“PM” mark

PM

SECOND

DAY OF THE WEEK

12/24-HOUR FORMAT

DATE

HOUR

MINUTE

S3

S3

S3

S3

S3

S3

MONTH

S3

■

HOW TO USE THE ALARM

From the NORMAL TIME mode, press

S3

twice to go

to the ALARM mode. The ALARM mode indicator

“AL” appears on the display.

1. Press

S2

to change the display to the ALARM

SETTING mode. The hour digits start flashing.

2. Press

S1

to set the hour digits. One digit (flashing)

is increased with each press of

S1

. To move the

digits quickly, keep

S1

pressed.

3. Press

S3

to confirm the hour setting and move

on to the minute setting. The minute digits start

flashing.

4. Press

S1

to set the minute digits. One digit

(flashing) is increased with each press of

S1

. To

move the digits quickly, keep

S1

pressed.

5. Press

S3

to confirm the minute setting and move

on to the time zone setting.

6. Press

S1

to select the time zone. Select “t1” for

alarm in the time zone 1, select “t2” for alarm in

the time zone 2. The alarm is available only in

one time zone.

7. Press

S2

to complete the alarm setting.

8. Press

S3

to return to the NORMAL TIME mode.

■

ENGAGEMENT/DISENGAGEMENT OF

THE ALARM & CHIME

1. From the NORMAL TIME mode, press

S3

twice to

go to the ALARM mode.

2. With each press of

S1

, the alarm and chime

can be engaged or disengaged in the following

order. The ALARM signal and/or CHIME signal

appear on the display accordingly.

3. Press

S3

to return to the NORMAL TIME mode.

ALARM mode indicator

CHIME signal

ALARM signal

**

To change the display mode, press S3. The display

mode changes in the following order.

STOPWATCH

NREZ017.indd 1 12/01/31 10:07

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Lorus Z017 Movement. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Lorus. They might be able to provide an original manual. Are you looking for the manual of your Lorus Z017 Movement in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Lorus Movements
More manuals of Movements

Frequently Asked Questions about Lorus Z017 Movement

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.