NREY922C
10-2010
CAL. Y922, YK30 , YK31, YK32 , YK33, YK34
CAL. Z001, Z002 , Z003 (R23 SERIES )
■ DISPLAY AND BUTTON OPERATION
■ CHARACTERISTICS
1. Time/calendar display: Hour, minute,
second, date, day of the week and month.
2. Automatic calendar adjustment: Calendar
adjusts automatically for odd and even
months except February of leap years.
3. Time indication: Changeover between 12-
hour and 24-hour indications is possible.
4. Stopwatch: 24-hour stopwatch with 1/100
second readout up to 40 minutes and with 1
second readout after the first 40 minutes.
Split time measurement is available.
5. Alarm: The alarm rings at the designated
hour and minute with “beep, beep” for 30
seconds.
6. Hourly time signal: Can be set to ring every
hour on the hour with a single “beep”.
7. Illuminating light (for Cal. YK30, YK31,
YK32, YK33, YK34 & Z001): The light evenly
illuminates the display in the dark.
Button B:
• Calendar (month, date and day) display in
the time/calendar display.
• Start/stop in the stopwatch function.
• Selection of the digits to be adjusted in the
alarm setting function and the time/
calendar setting function.
Button C:
• Alarm display in the time/calendar display.
• Split/Split release/Reset in the stopwatch
function.
• Setting the digits in the alarm setting function
and the time/calendar setting function.
• Stopping the alarm in any display.
Button B while keeping Button C pressed:
Engagement and disengagement of the alarm
and the hourly time signal.
Button C while keeping Button B pressed:
Changeover of the calendar (month and date)
display.
Buttons B & C:
Alarm test in the time/calendar display.
■ HOW TO SET THE DUAL CALENDAR
DISPLAY
1 Press Button B to show the calendar (month,
date, and day) display. The calendar display
is shown while Button B is kept pressed.
2 The month and the date change places with
each other with each press of Button C while
keeping Button B pressed.
* In the 12-hour indication, “A” (AM)/“P” (PM)
mark is displayed. In the 24-hour indication,
there is no indication.
■ HOW TO USE THE STOPWATCH
1 Press Button A to show the stopwatch display.
(The stopwatch indicator starts flashing.)
The stopwatch can measure up to 24 hours
and is displayed in minutes,
seconds, and
1/100 seconds up to 40 minutes, and in
hours,
minutes, and seconds after the first
40 minutes. (The 1/100 second indicator
flashes during the first 40 minutes.)
When the measurement is over 24 hours, the
stopwatch will be reset to “0:00oo” and start
counting again.
2 Reset the digits to “0:00oo” before using the
stopwatch. When the split and the
stopwatch indicators are flashing, press
Button B to check that the stop indicator
starts flashing, and then press Button C twice
to reset the digits to zero.
3 When measuring a long period of time, return
the stopwatch to the time/calendar display
after the stopwatch starts to prevent any
possible mistaken operation.
* When Button B or C is pressed in the
stopwatch display, a single “beep” sounds
to confirm the operation.
Start Stop Restart
Stop
Reset
■ HOW TO SET THE ALARM
Hour setting
Minute setting
1 Press Button A for 2 seconds to activate the
alarm setting function. (The alarm set
indicator starts flashing.)
2 Press Button B to activate the “Hour” or
“Minute” setting. The display changes in the
following order with each press of Button B.
3 One digit (flashing) is advanced with each
press of Button C. The digits are advanced
quickly by keeping Button C pressed.
4 After all the adjustments are completed,
press Button A to return to the time/calendar
display.
(The display returns directly to the time/
calendar display and not to the time/
calendar setting.)
C
CB
C
B
Start
Finish time
of 1st
competitor
Stop
Finish time
of 2nd
competitor
Reset
Measurement between two competitors
Finish (First runner)
Finish (Second runner)
Note: When setting the hour digits, be sure to
check that the “A” (AM)/“P” (PM) mark is
correctly set.
[Cal. YK32 / Z001]
Hour
Minute
A
EL button
Hourly time
signal mark
Alarm mark
Day indicator
Second
EL button
C
B
[Cal. YK33]
[Cal. YK30 / YK31]
Hour
A
EL button
Hourly time
signal mark
AM/PM indicator
12-hour/24-hour indication
EL button
Alarm mark
Day indicator
Second
C
B
Minute
B
Alarm/
Hourly time signal mark
Hour
A
Second
C
Minute
Day indicator
[Cal. YK34]
Hour
Second
Minute
EL button
A
C
B
A
Minute
B
Hour
[Cal. Y922 / Z002 / Z003]
Hourly time
signal mark
Day indicator
Alarm mark
C
Second
Button A:
• Selection of the display.
The selection is made in the following order:
Day
indicator
Alarm/Hourly time
signal mark
AM/PM indicator
A
A
Time/calendar display Stopwatch display
Press
Button A
for 2 sec.
A
A
Alarm settingTime/calendar setting
B
C
Month
Day
B
C
Date
Day
Month
Date
A
Stopwatch
indicator
Stop indicator
Split indicator
1/100 second
indicator
B:Start/Stop
C: Split/
Split release/
Reset
Minute
Second
1/100 second
A
C
Alarm set indicator
B
Hour
Minute
“A” (AM)
Start
❈ Measurement and release of split time can be
repeated by pressing button C.
Split time measurement
B B CC C
Split
Split
Release
Stop Reset
❈
❈ Restart and stop of stopwatch can be repeated
by pressing button B.
Accumulated elapsed time measurement
B B B
BC
❈
B
BLUE 10.8.18, 5:19 PMPage 1 Adobe
Join the conversation about this product
Here you can share what you think about the Lorus YK34 Movement. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.