Home > Miscellaneous > Watches > Lorus Watches > Lorus RW633AX9 Sports Watch

Manual Lorus RW633AX9 Sports Watch

Need a manual for your Lorus RW633AX9 Sports Watch? Below you can view and download the PDF manual for free in English. This product currently has 6 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

■

CHARACTERISTICS

1. Analogue & digital time displays: Hour,

Minute, Second, Month, Date and Day of the

week.

2. Daily alarm and hourly chime: The alarm

can be set to sound at the designated time

on a 24-hour basis and the chime can be set

to sound every hour on the hour with a single

beep.

3. Stopwatch: The stopwatch can measure

up to 23 hours 59 minutes and 59 seconds

in 1/100-second increments. Split time

measurement is available.

4. Selection of 12 or 24-hour format: The time

display format in either 12-hour indication or

24-hour indication can be selected.

5. EL backlight: The built-in electro-luminescent

(EL) backlight illuminates the display for easy

viewing in darkness.

■

DISPLAY AND BUTTON FUNCTION

■

HOW TO SET TIME/CALENDAR

■

HOW TO SET ALARM TIME

■

HOW TO CHANGE THE DISPLAY

MODE

■

SETTING THE TIME (ANALOGUE)

1. Pull the crown out one step, the second hand

will stop.

2. Set the correct time by turning the crown.

3. Push the crown back to the original position.

The watch will start running again.

* The analogue indication and digital display of

the time setting can be adjusted separately.

STOPWATCH mode

1. From NORMAL TIME mode,

press S3 button

twice to enter the ALARM mode.

2. Press S2 button to begin setting procedure.

The hours digit starts flashing.

3. Press S1 button to set HOURS setting.

4. Press S2 button to move on to MINUTES setting.

Press S1 button to set MINUTES setting.

5. Press S2 button to confirm the settings.

6. Press S3 button to return to NORMAL TIME

mode.

Press S3 button to show the

NORMAL TIME

mode.

* If the NORMAL TIME mode is shown already on

the display, skip the above operation.

* Press S3 button to change the display mode in

the following order.

NREZ021

3-2013

CAL. Z021 (RW6 SERIES)

From NORMAL TIME mode, p

ress S3 button

three times to begin setting procedure.

The second digits start flashing.

2. Press S1 button to reset the second digits to

zero.

* If S1 button is pressed when the second digits

are in a range between 30 and 59, the second

digits will be reset to 00 and one minute will be

added. If S1 button is pressed when the second

digits are in a range between 00 and 29, the

second digits will be reset to 00 and the minute

digits will be unchanged.

3. Press S2 button to move on to HOURS setting.

* Selection of the digits to be adjusted is made in

the following order by pressing S2 button. Press

S1 button to adjust the value.

* When setting HOURS, “H” stands for 24-hour

format, “A” or “P” stands for 12-hour format.

4. Press S3 button after completing the setting.

CROWN

NORMAL TIME mode

ALARM mode

HOURS SETTING BY

PRESSING S1

MINUTES SETTING BY

PRESSING S1

NORMAL TIME

MINUTES SETTING BY

PRESSING S1

HOURS SETTING BY

PRESSING S1

SECONDS SETTING

BY PRESSING S1

PRESS

3 times

MONTH SETTING BY

PRESSING S1

DATE SETTING BY

PRESSING S1

SECONDS

DATE

DAY OF

THE WEEK

MONTH

MINUTESHOURS

12/24H-

FORMAT

TIME SETTING mode

ALARM modeNORMAL TIME mode

DAY OF WEEK SETTING

BY PRESSING S1

S4 (LIGHT)

HOURS

DAY OF WEEK

CHIME

DATE

MINUTES

SECONDS

ALARM

S3 (MODE)

S2 (RESET)

MONTH

S1(START/STOP)

PRESS

twice

for confirmation

Engagement/Disengagement of ALARM &

CHIME

* In the ALARM setting mode, with each press

of S1 button, the ALARM and CHIME can be

engaged or disengaged in the following order.

The ALARM signal and/or CHIME signal appear

or disappear on the display accordingly.

NORMAL TIME

ALARM ON

CHIME ON

ALARM/CHIME ON

ALARM MODE

How to stop the alarm sound

Press S3 to turn the snooze function on or off

alternately. When the snooze function is enabled,

the alarm will stop sounding temporarily and

go off again 5 minutes later for 20 seconds and

automatically stop.

Press S1 or S2 to stop the alarm while it is sounding.

Snooze function

PRESS

twice

Rating

Let us know what you think about the Lorus RW633AX9 Sports Watch by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Lorus RW633AX9 Sports Watch?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Lorus RW633AX9 Sports Watch. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Lorus RW633AX9 Sports Watch. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Lorus. They might be able to provide an original manual. Are you looking for the manual of your Lorus RW633AX9 Sports Watch in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Lorus
Model	RW633AX9 Sports
Category	Watches
File type	PDF
File size	1.51 MB

All manuals for Lorus Watches
More manuals of Watches

Frequently Asked Questions about Lorus RW633AX9 Sports Watch

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

A battery in my device is oxidized, can I still safely use it? Verified

Ja, the device can still be safely used. Firstly, remove the oxidizd battery. Never use bare hands to do this. Then clean the battery compartment with a cotton swab dipped in vinegar or lemon juice. Let it dry and insert new batteries.

This was helpful (805) Read more

My mechanical watch runs fast, what can I do? Verified

This might be caused by exposure to a magnetic field. It can be solved by a demagnetisation process performed by a professional watchmaker.

This was helpful (769) Read more

What do AM and PM stand for? Verified

AM stands for Ante Meridiem and indicates that the time is before midday. PM stands for Post Meridiem and indicates that the time is past midday.

This was helpful (665) Read more

What is a 'Chronograph'? Verified

A 'Chronograph' is literally a 'writer of time'. The term is used to describe clocks and watches that tell the time of day as well as measure a certain period of time, like a stopwatch.

This was helpful (579) Read more

What is GMT? Verified

GMT stands for Greenwich Mean Time (sometimes called UTC, standing for Coordinated Universal Time). It is the time for the longitude 0, that passes through Greenwich near London.

This was helpful (401) Read more

What is a quartz movement? Verified

Watches and clocks with a quartz movement are driven by a battery. This sends an electric current through quartz crystals that will vibrate. These vibrations are passed on to the movement. Because the vibrations have a fixed frequency, watches and clocks with a quartz movement are extremely precise.

This was helpful (401) Read more