Home > Audio, TV & Photo > Speakers > Logitech Speakers > Logitech X530 Speaker

Manual Logitech X530 Speaker

Name: Logitech X530 Speaker
Brand: Logitech
SKU: X530
Rating: 100 (1 reviews)

Need a manual for your Logitech X530 Speaker? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 1 vote with an average product rating of 100/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Setting up your Logitech® X-530 speakers

Important: For your safety, set up the system before plugging it into a power source.

1. Before attaching the cables to the subwoofer, position the two front satellite speakers on either side of your computer

monitor about the same distance from each other as from you. Angle them to face you. The right front speaker is

the control center for your system, so you will want to place it within easy reach. Place the rear left and right satellite

speakers behind you and about the same distance apart as the front speakers. Position the front center channel

speaker on top of your monitor or on your desk in between your monitor and keyboard. Depending on where you

place your speakers, adjust the stand to direct the sound toward you.

For best sound quality, place the subwoofer on the floor beneath your desk. Be sure to maintain at least 6 inches of

spacing around the subwoofer to allow for adequate ventilation.

2. Insert the colored plug from each satellite speaker into the corresponding colored jacks on the back of the subwoofer.

Connect the d-sub plug from the front right speaker to the subwoofer as shown on the previous page. Carefully align

the pins before inserting the plug, and screw down the connector.

3. A. If you have a PC and a:

• 6, 7 or 8 channel (5.1, 6.1 or 7.1) sound card: Connect all 3 colored plugs from the audio input cable to the color-

coded jacks on the sound card.

1. If jacks on your soundcard are not color coded, plug the audio input as follows:

• green to front L/R (or #1)

• black to rear L/R (or #2)

• orange to center / sub (or #3)

• 4-channel sound card: Connect the green plug from the audio input cable to your sound card’s front jack and the

black plug to your sound card’s rear jack. Do not use the orange plug.

• 2-channel sound card: Connect the green plug from the audio input cable to the “line out” jack on your sound

card. Do not use the black or orange plugs.

With a 2-channel sound card you will not hear sound from the rear speakers.

B. If you have a video game console (PlayStation®, PlayStation®2, Xbox™, or GameCube®):

• Connect the green, black and orange plugs from the audio input

cable to the 3 stereo mini jacks on the video game adapter.

• Connect the red and white RCA audio cables from your video game

console to the RCA audio jacks to the video game adapter.

4. Plug the subwoofer’s power cord into an electrical outlet.

Enjoying your Logitech® X-530 speakers

Access these controls on the right front speaker:

Power/Standby

Toggles between power on and standby mode.

System Volume

Adjusts the overall system volume.

Headphone Jack

When headphones are used with your X-530 system, the speakers will mute automatically for private listening.

Headphone volume is controlled by the soundcard on your computer.

Dolby® Digital

The X-530 speakers support Dolby® Digital sound on your PC if your 6-channel or greater sound card or DVD software

can decode a Dolby® Digital soundtrack.

Subwoofer Volume

Located on the subwoofer. Use to adjust subwoofer volume (bass level).

Mounting your speakers to the wall

Your Logitech X-530 speaker satellites are wall mountable. Swivel the satellite base to desired

position, and use the notch to hang your speaker on appropriate wall anchors.

Specifications

• Total RMS Power: 70.1 Watts

Subwoofer: 25 watts RMS into 4 ohms at 100Hz at 10% THD clipping (total harmonic

distortion)

Satellites: 45.1 watts RMS (2 x 7.4 w Front; 15.5 w Center: 2 x 7.4 w Rear ) into 4 ohms

at 1 kHz at 10% THD clipping (total harmonic distortion)

• Total Peak Power: 140 Watts at <10% THD

• System THD: Better than 0.07% THD before

clipping

• Signal to noise ratio: >99 dB

• Frequency response: 40 Hz - 20 kHz

• Driver Size: 2” high excursion satellites, 5.25” high excursion subwoofer

• Speaker dimensions:

Satellites: (H) 8” x (W) 2.5” x (D) 3”

Center: (H) 2.5” x (W) 8” x (D) 3”

Subwoofer: (H) 11.5” x (W) 6” x (D) 9.25”

Setup

Setup - Operation - Specifications

English

Notch

Rating

Let us know what you think about the Logitech X530 Speaker by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Logitech X530 Speaker?
Yes No

100%

1 vote

Join the conversation about this product

Here you can share what you think about the Logitech X530 Speaker. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Logitech X530 Speaker. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Logitech. They might be able to provide an original manual. Are you looking for the manual of your Logitech X530 Speaker in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Logitech
Model	X530
Category	Speakers
File type	PDF
File size	0.33 MB

All manuals for Logitech Speakers
More manuals of Speakers

Frequently Asked Questions about Logitech X530 Speaker

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

I want to connect a speaker to my television with HDMI, which port should I use? Verified

You need to use the HDMI-ARC port, which is specifically made for connecting audio equipment.

This was helpful (1372) Read more

What do the frequencies say about my speaker? Verified

It indicates the range of frequencies that the speaker can produce. A bigger range of frequencies will provide a larger variation in sound en produce higher quality sound.

This was helpful (745) Read more

When is my music too loud? Verified

Sounds over 80 decibel (dB) can start to damage hearing. Sounds over 120 dB immediately damage hearing. The severity of the damage depens on how often and how long the sound is present.

This was helpful (436) Read more

Does bluetooth work through walls and ceilings? Verified

A bluetooth signal will work through walls and ceiling, unless these are made from metal. Depending on the thickness and the material of the wall the signal can lose in strength.

This was helpful (200) Read more

Up to what noise level is it safe for children? Verified

Children get their hearing damaged quicker than adults. Therefore it is important to never expose children to noise louder than 85dB. In the case of headphones there are special models for children. In case of speakers or other situations you have to be watchful the noise does not exceed that level.

This was helpful (178) Read more