Manual Logik LC17PC12 Kettle

Need a manual for your Logik LC17PC12 Kettle? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

GB-1 GB-2 GB-3
MAX
1.2L
1.0L
MIN
1.5L
1.8L
UNPACKING
Remove all packaging from the unit. Retain the packaging. If you dispose of it
please do so according to local regulations.
The following items are included:
SWITCHING ON
Place the kettle on its stand. Connect the
stand’s mains cable to the mains socket.
FIRST TIME USE
Clean your kettle by boiling a full kettle of water twice and then discarding the
water.
KEEPING THE MAINS CABLE TIDY
Extend the mains cable in the kettle stand
to the required length. Locate the mains
cable in the slot in the stand. For safety it
is recommended that the length of
exposed mains cable is kept as short as
possible.
PRODUCT OVERVIEW
The Main Unit
• Instruction Manual
(P.N.: LC17PKB_C_R12-002)
• Kettle Stand
(P.N.: LC17PKB_C_R12-SF)
• Never open the lid while the
water is boiling. The steam
coming out from the kettle is
very hot.
• If there is insufficient water in
the kettle, the automatic safety
cut-out will operate. If this
happens, allow the kettle to cool
for 10 minutes before relling
with cold water and re-boiling.
This kettle must only be used
with the stand provided.
MAX
1.2L
1.0L
MIN
1.5L
1.8L
MAX
1.2L
1.0L
MIN
1.5L
1.8L
Handle
Lid
Spout
Mains Cable
Water Fill Level
Kettle Stand
Power Switch
Mains
Cable
FILLING THE KETTLE
• Open the lid.
• Fill the kettle with the required amount of water.
• Do not exceed the maximum ll level (MAX 1.8L)
as indicated on the water ll level.
• Always ensure the kettle is lled passed the
minimum ll level (Min 1.0L) as indicated on the
water ll level.
If the kettle is overfilled, boiling water
may be ejected from the spout and
cause scalding.
Lift the power switch to the ON position
(indicated by the symbol ‘I’).
WHEN THE WATER HAS BOILED
The kettle will automatically switch off
(indicated by the symbol ‘0’ ).
CLEANING THE KETTLE
The kettle exterior should be cleaned with a soft damp cloth. Do not use abrasive
cleaners or scouring pads which may damage the nish of the kettle.
Never immerse the kettle or the stand in water and always keep the electrical
contacts dry. Always disconnect from the mains before cleaning the stand.
DESCALING THE KETTLE
Depending on the hardness of the water
in your area, limescale may be deposited
on the heating element and the inside of
the kettle. This normal build-up is not
harmful to health but an excessive
amount of scale may affect the
performance of the kettle.
To descale, ll the kettle with distilled
water up to three-quarters of the Max
level and bring the water to boil. After the
kettle has switched off, add a descaling
solution following the manufacturers
instructions. Never attempt to descale the
kettle by chipping or scraping with a
sharp implement.
• Ensure that the switch is not obstructed and the lid is rmly closed.
The kettle will not turn off if the switch is obstructed or if the lid is
open.
• After removing the kettle, there may be some water on the surface of
the stand. This is condensation from the steam that causes the kettle
to automatically switch off after boiling. This is normal and should
not be a cause for alarm.
The indicator in the power switch of the
kettle will light up blue to indicate that
the kettle is heating.
MAX
1.2L
1.0L
MIN
1.5L
1.8L
MAX
1.2L
1.0L
MIN
1.5L
1.8L
MAX
1.2L
1.0L
MIN
1.5L
1.8L
MAX
1.2L
1.0L
MIN
1.5L
1.8L
0
I
0
I
Power Connector Hole
Thank you for purchasing your new Logik Kettle.
We recommend that you spend some time reading this instruction
manual in order to fully understand all the operational features it
offers.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Stainless Steel Kettle
LC17PKB12
Brilliant Blue
LC17PKC12
Classic Cream
LC17PKR12
Ruby Red
C
M
Y
CM
MY
CY
CMY
K
LC17PKB_C_R12_IB_final120327_RC_min water level.pdf 2 10/04/2012 3:57 PM
Download manual in English (PDF, 0.84 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Logik LC17PC12 Kettle by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Logik LC17PC12 Kettle?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Logik LC17PC12 Kettle. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Logik LC17PC12 Kettle. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Logik. They might be able to provide an original manual. Are you looking for the manual of your Logik LC17PC12 Kettle in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Logik
Model LC17PC12
Category Kettles
File type PDF
File size 0.84 MB

All manuals for Logik Kettles
More manuals of Kettles

Frequently Asked Questions about Logik LC17PC12 Kettle

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the sieve for in my kettle? Verified

This is to catch any loose limescale that might have accumulated over time.

This was helpful (419) Read more

The kettle does not finish and keeps on boiling, what should I do? Verified

In many cases the lid of the kettle was not closed properly. If heat is allowed to escape, the kettle will keep on boiling. If this does not solve the problem you should contact the manufacturer or a mechanic.

This was helpful (281) Read more

Can I boil less than the minimim amount of water? Verified

No. When boiling less than the minimum amount of water, the temperature sensor might malfunction. This might prevent the kettle from switching off at boiling point, resulting in possibly dangerous situations.

This was helpful (122) Read more

Can I boil more than the maximum amount of water? Verified

No. When boiling more than the maximum amount of water, the kettle might overflow. This might result in possibly dangerous situations.

This was helpful (79) Read more

Is it efficient to fill a kettle with hot water from the faucet? Verified

No. To get warm water to the faucet it is often needed to let cold water out first, which will be wasted. Also, the pipes will fill the same amount of hot water which will not be used and will cool, which leads to energy loss. Therefor it is better to fill a kettle with cold water.

This was helpful (79) Read more
Manual Logik LC17PC12 Kettle

Related products

Related categories