Home > Household appliances > Kettles > Logik Kettles > Logik L17KBS10 Kettle

Manual Logik L17KBS10 Kettle

Need a manual for your Logik L17KBS10 Kettle? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

GB-1 GB-2

GB-3

PRODUCT OVERVIEW

UNPACKING

Remove all packaging from the kettle. Retain the packaging. If you dispose

of it please do so according to local regulations.

The following items are included:

FIRST TIME USE

Clean your kettle by boiling a full kettle of water twice and then discarding

the water.

KEEPING THE MAINS CABLE TIDY

Extend the mains cable in the kettle stand to

the required length. Locate the mains cable

in one of the slots in the stand. For safety it

is recommended that the length of exposed

mains cable is kept as short as possible.

Place the kettle stand on a rm level surface

and plug in the mains plug at a standard

mains socket (240 Volt 13 Amp rated).

Instruction Manual

(Part number: L17KBS10-001)

The kettle

If items are missing or damaged, please contact Partmaster (UK only)

Tel. 0844 800 3456 for assistance.

This kettle must only be used with the stand provided.

DESCALING THE KETTLE

Depending on the hardness of the water

in your area, limescale may be deposited

on the heating element and the inside of

the kettle. This normal build-up is not

harmful to health but an excessive

amount of scale may aect the

performance of the kettle.

To descale, ll the kettle with distilled

water up to three-quarters of the Max

level and bring the water to boil. After the

kettle has switched o, add a descaling

solution following the manufacturers

instructions. Never attempt to descale the

kettle by chipping or scraping with a

sharp implement.

CLEANING THE KETTLE

The kettle exterior should be cleaned with a soft damp cloth. Do not use

abrasive cleaners or scouring pads which may damage the nish of the kettle.

Never immerse the kettle or kettle stand in water and always keep the electrical

contacts dry. Disconnect from the mains before cleaning the kettle stand.

CLEANING THE REMOVABLE SCALE FILTER

To prevent loose particles of limescale being poured into your beverage, your

kettle is tted with a scale lter. You may remove the lter and t it back in

after cleaning.

FILLING THE KETTLE

Slide the switch to open the lid and ll the kettle with the required amount of

water.

Do not exceed the maximum ll level (Max 1.7L) as indicated inside the kettle

and not less than the minimum ll level (Min 0.5L).

Do not insert any foreign objects or allow any liquid to spill into the Power

Connector Hole.

WHEN THE WATER HAS BOILED

The kettle will automatically switch o . The

light inside the kettle will go o.

Ensure that the switch is not

obstructed and the lid is rmly closed.

The kettle will not turn o if the

switch is obstructed or if the lid is

open.

If there is insucient water in the kettle, the automatic safety cut-out

will operate. If this happens, allow the kettle to cool for ten minutes before

relling with cold water and re-boiling.

If the kettle is overlled, boiling water may be ejected from the spout and

cause scalding.

After removing the kettle, there may be some water on the surface of the

stand. This is condensation from the steam that causes the kettle to

automatically switch o after boiling. This is normal and should not be a

cause for alarm.

Never open the lid while the water is

boiling. The steam coming out from

the kettle is very hot.

SWITCHING ON

Place the kettle on the stand and press the

power switch downward. The light inside

the kettle will illuminate to indicate that the

kettle is heating. This is visible through the

glass lid.

Stand

Spout

Lid

Fill Level

Power Switch

Open Button

Handle

Power Connector Hole

To remove the lter, open the lid,

press and lift up the lter from the

bracket at the spout.

To t in the lter, open the lid, place

the lter inside the bracket at the

spout, locate the 3 slots shown by the

arrows above and t it in place.

Download manual in English (PDF, 0.8 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Logik L17KBS10 Kettle by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Logik L17KBS10 Kettle?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Logik L17KBS10 Kettle. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Logik L17KBS10 Kettle. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Logik. They might be able to provide an original manual. Are you looking for the manual of your Logik L17KBS10 Kettle in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Logik
Model	L17KBS10
Category	Kettles
File type	PDF
File size	0.8 MB

All manuals for Logik Kettles
More manuals of Kettles

Frequently Asked Questions about Logik L17KBS10 Kettle

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the sieve for in my kettle? Verified

This is to catch any loose limescale that might have accumulated over time.

This was helpful (496) Read more

The kettle does not finish and keeps on boiling, what should I do? Verified

In many cases the lid of the kettle was not closed properly. If heat is allowed to escape, the kettle will keep on boiling. If this does not solve the problem you should contact the manufacturer or a mechanic.

This was helpful (331) Read more

Can I boil less than the minimim amount of water? Verified

No. When boiling less than the minimum amount of water, the temperature sensor might malfunction. This might prevent the kettle from switching off at boiling point, resulting in possibly dangerous situations.

This was helpful (153) Read more

Is it efficient to fill a kettle with hot water from the faucet? Verified

No. To get warm water to the faucet it is often needed to let cold water out first, which will be wasted. Also, the pipes will fill the same amount of hot water which will not be used and will cool, which leads to energy loss. Therefor it is better to fill a kettle with cold water.

This was helpful (100) Read more