Manual Logik L17JKB12 Kettle

Manual

GB-1 GB-2 GB-3

max

1.7L

6

2

0

I

4

max

1.7L

6

2

0

I

4

max

1.7L

6

2

0

I

4

max

1.7L

6

2

0

I

4

max

1.7L

6

2

0

I

4

UNPACKING

Remove all packaging from the unit. Retain the packaging. If you dispose of it

please do so according to local regulations.

The following items are included:

FILLING THE KETTLE

Grip the lid recess and kettle rmly. Pull on the

lid recess to open the lid. Fill the kettle with

the required amount of water. Do not exceed

the maximum ll level (Max 1.7L) as indicated

on the Water Fill Level. Always ensure the

kettle is lled past the minimum ll level as

indicated on the Water Fill Level.

Place the kettle on its stand. Connect the

stand’s mains cable to the mains socket.

Push the power switch down to the ON

position (indicated by the symbol ‘I’).

The indicator of the side of kettle will light up

orange to indicate that the kettle is heating.

WHEN THE WATER HAS BOILED

The kettle will automatically switch off (indicated by the symbol ‘0’ ).

CLEANING THE KETTLE

The kettle exterior should be cleaned with a soft damp cloth. Do not use abrasive

cleaners or scouring pads which may damage the nish of the kettle.

Never immerse the kettle or the stand in water and always keep the electrical

contacts dry. Always disconnect from the mains before cleaning the stand.

DESCALING THE KETTLE

Depending on the hardness of the water in

your area, limescale may be deposited on

the heating element and the inside of the

kettle. This normal build-up is not harmful to

health but an excessive amount of scale may

affect the performance of the kettle.

To descale, ll the kettle with distilled water

up to three-quarters of the Max level and

bring the water to boil. After the kettle has

switched off, add a descaling solution

following the manufacturers instructions.

Never attempt to descale the kettle by

chipping or scraping with a sharp

implement.

SWITCHING ON

FIRST TIME USE

Clean your kettle by boiling a full kettle of water twice and then discarding the

water.

KEEPING THE MAINS CABLE TIDY

Extend the mains cable in the kettle stand

to the required length. Locate the mains

cable in the slot in the stand. For safety it is

recommended that the length of exposed

mains cable is kept as short as possible.

PRODUCT OVERVIEW

• The Main Unit • The Kettle Stand

(P.N.: L17JKB12-004)

• Instruction Manual

(P.N.: L17JKB12-022V2)

Lid

Handle

Power Switch

Kettle Stand

Mains Cable

Water Fill

Level

Spout

Lid Recess

This kettle must only be used

with the stand provided.

Power Connector Hole

Slot

If the kettle is overlled, boiling

water may be ejected from the

spout and cause scalding.

The kettle stand comes packaged inside the kettle. Remove the kettle

stand and place it on a rm, stable and dry work surface.

Do not insert any foreign objects or allow any liquid to spill into the

Power Connector Hole.

• Never open the lid while the water

is boiling. The steam coming out

from the kettle is very hot.

• If there is insufficient water in the

kettle, the automatic safety cut-out

will operate. If this happens, lift the

power switch back to the OFF

position, allow the kettle to cool for

10 minutes before relling with

cold water and re-boiling.

• Ensure that the switch is not

obstructed and the lid is rmly closed.

The kettle will not turn off if the switch

is obstructed or if the lid is open.

• After removing the kettle, there may

be some water on the surface of the

stand. This is condensation from the

steam hat causes the kettle to

automatically switch off after boiling.

This is normal and should not be a

cause for alarm.

90˚

max

1.7L

6

2

0

I

4

max

1.7L

6

2

0

I

4

max

1.7L

6

2

0

I

4

max

1.7L

6

2

0

I

4

Kettle

Instruction Manual

L17JKB12

Thank you for purchasing your new Logik Kettle.

We recommend that you spend some time reading this instruction

manual in order to fully understand all the operational features it

offers.

Read all the safety instructions carefully before use and keep this

instruction manual for future reference.

C

M

Y

CM

MY

CY

CMY

K

L17JKB12_IB_RC_final120731_BW.pdf 2 31/7/12 3:52 PM

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Logik L17JKB12 Kettle. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Logik. They might be able to provide an original manual. Are you looking for the manual of your Logik L17JKB12 Kettle in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Logik Kettles
More manuals of Kettles

Frequently Asked Questions about Logik L17JKB12 Kettle

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Logik L17JBS17 Kettle

Manual

Logik L17PKBU13 Kettle

Manual

Logik L17PKGS21 Kettle

Manual

Logik L17TKS11 Kettle

Manual

Logik L17PKG23 Kettle

Manual

Logik L15TKS10 Kettle

Manual

Logik L17KBS11 Kettle

Manual

Logik L17PKW21 Kettle

Related categories