Manual Logik L15BSS13 Blender

Manual

Thank you for purchasing your new Logik Blender.

We recommend that you spend some time reading this instruction manual in

order to fully understand all the operational features it oers.

Read all the safety instructions carefully before use and keep this instruction

manual for future reference.

GB-4 GB-5

DSG Retail Ltd. (Registered in England no. 504877)

Maylands Avenue, Hemel Hempstead, Hertfordshine, HP2 7TG, UK

Visit Partmaster.co.uk today for the easiest way to buy

electrical spares and accessories. With over 1 million

spares and accessories available we can deliver direct

to your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK

customers only) Calls charged at National Rate.

This symbol on the product or in the instructions means that your

electrical and electronic equipment should be disposed at the end of its

life separately from your household waste. There are separate collection

systems for recycling in the EU. For more information, please contact the

local authority or your retailer where you purchased the product.

QSG-L15BSS13-130131V1

Instruction Manual

Blender

L15BSS13

OPERATION

1. Make sure the jug and the lid are secure and in the Locked position.

2. Turn the Speed Dial to ‘0’.

3. Plug your blender into the mains socket and switch on the power.

Do not run the appliance continuously for more than 3 minutes.

After a full 3 minute cycle allow the blender to rest for another 5

minutes before using it again.

Operation

• Select the desired operating speed. There are 2

speeds. Move the Speed Dial progressively to the

right to increase the speed. When you start

blending use a low speed to begin and gradually

increase the speed if necessary.

• To stop, turn the Speed Dial back to ‘0’.

Use this mode when ingredients need to be

blended in small repeated bursts.

• Turn the Speed Dial to ‘P’ and hold it there for a

short time.

• To stop the operation, release the Speed Dial will

automatically return to ‘0’.

Continuous (Normal)

Pulse

AFTER USE

After you have nished blending:

1. Set the Speed Dial to ‘0’.

2. Hold the jug by the handle and carefully turn it clockwise (towards you) to

release the jug. (This may be easier with one hand on the base and one hand

holding the jug handle).

3. To pour out the contents, rotate the lid of the jug anticlockwise to free it and

then lift o the lid. Pour or spoon the contents out carefully.

4. Unplug the blender from the mains socket.

• Do not run the appliance continuously for more than 3 minutes.

After a full 3 minute cycle allow the blender to rest for another 5

minutes before using it again.

• Never blend very hot liquids in the blender. This is dangerous as

the contents may erupt.

• If you spill liquid on the blender base immediately switch off and

wipe dry.

During blending, you can feed in small amounts of food or liquid through the

jug lid. To do this:

1. Hold the lid.

2. Turn the stopper slowly anti-clockwise to free it and then lift it out.

3. Gradually feed pieces of food or liquids into the jug through the feeder.

4. Fit the stopper back when you have nished.

CLEANING

Cleaning the blender jug:

1. Pour about 500ml of warm soapy water into the jug and place the jug on the

base.

2. Turn and hold the Speed Dial to ‘P’ for a few seconds to loosen any food

particles and free them from the blades.

• Remove the jug, pour away the water and rinse in fresh running water.

Repeat 1 and 2 with fresh water.

• Alternatively the jug may be immersed in warm soapy water and cleaned

using a long handled brush. Do not touch the blades when cleaning.

• Wash the lid and stopper separately in warm soapy water, rinse and allow to

dry.

• DO NOT wash the jug or attachments in a dishwasher.

Cleaning the base:

• Ensure the blender is switched off and unplugged from the mains.

• Wipe the outer surface of the motor unit with a damp cloth. Never use abrasive

cleaners or scouring creams.

Always operate blender with cover in place.

The jug body should be handled carefully. The jug contains moving

parts - do not leave the jug immersed in water for any longer than

necessary to clean it or you may aect the operating performance of

the blender.

STORAGE

After all the components have been washed and dried, re-assemble the blender and

store it out of direct sunlight and out of the reach of children.

The cable may be wound around the lugs at the bottom of the appliance for easier

storage.

SPECIFICATIONS

Power : 230V~50Hz, 450W

Capacity of Jug : 1.5 litres max.

Duty Cycle : 3 minutes ON; 5 minutes OFF

We continually strive to improve our products, specications may change without

prior notice.

C

M

Y

CM

MY

CY

CMY

K

L15BSS13_IB_final_130131.pdf 1 31/01/2013 5:45 PM

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Logik L15BSS13 Blender. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Logik. They might be able to provide an original manual. Are you looking for the manual of your Logik L15BSS13 Blender in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Logik Blenders
More manuals of Blenders

Frequently Asked Questions about Logik L15BSS13 Blender

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.