Home > Do-It-Yourself > Glue Guns > Levior Glue Guns > Levior 89973 Glue Gun

Manual Levior 89973 Glue Gun

Need a manual for your Levior 89973 Glue Gun? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

GETTING TO WORK

PREPARATION BONDING SURFACE

• The surfaces to be glued, first thoroughly clean and degrease. Do not use flammable

solvents. When applying hot glue the solvent residues could ignite.

• Ensure that the surfaces before applying the glue is dry.

• Smooth roughen surfaces prior to bonding.

PŘÍPRAVA PISTOLE

CAUTION

Before handling and use of gun , read the safety instructions.

1. stand (Figure 1, Position 3)take of the gun away from the body so that it is possible to put

up a gun.

2. gun place on a stable, level surface and ensure that it is stable.

3. Connect the gun to power supply. voltage. First, however, check that the mains voltage

corresponds to the voltage on the data plate (Fig. 1, position 7).

4. Operating switch (Fig. 1, position 6) switch to position "I".

5. gun leave 5-7 minutes to warm up to operating temperature.

6. to load the gun with rod of suitable hot melt adhesive (see Figure 1, position 1) and with a

slight pressure on the bar at the same time Continue pressing the lever (Fig. 1, position 4),

until it begins to flow from the nozzle melt adhesive.

CAUTION

• melting gun load only with the specified hot melt adhesive stick. Make sure that the type of

used hot melt adhesive is suitable for bonding of the material.

• The inserted rod hot melt adhesives can not be ejected back throught the insertion hole.

PROCEDURE FOR BONDING

• Make sure that the ambient temperature and the temperature of glued materials is in the

temperature range from +5 ° C to +50 ° C.

• Materials that rapidly cool pre-heat for better adhesion of the glue for example with a hot air

gun.

• Apply to the surface molten adhesive by pressing shift lever (Fig. 1, position 4).

• Bonded parts after applying the adhesive, immediately press for about 30 seconds.

• At the time between each bonding put up the gun on the stand (Figure 1, Figure 3).

Note:

• After cooling remove the residues of adhesive with a sharp object.

• Bonded spots can be re-release by heating

CLEANING AND MAINTENANCE

CAUTION

Before cleaning and maintenance, unplug the glue gun out of the socket with el. shock.

CLEANING TIPS

• The nozzle does not require any special maintenance. Under the conditions of correct use of

reperfusion enough to heat the nozzle gun with nozzle to operating temperature (about 7 min.)

Rating

Let us know what you think about the Levior 89973 Glue Gun by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Levior 89973 Glue Gun?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Levior 89973 Glue Gun. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Levior 89973 Glue Gun. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Levior. They might be able to provide an original manual. Are you looking for the manual of your Levior 89973 Glue Gun in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Levior
Model	89973
Category	Glue Guns
File type	PDF
File size	0.15 MB

All manuals for Levior Glue Guns
More manuals of Glue Guns

Frequently Asked Questions about Levior 89973 Glue Gun

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Which materials can I glue with a glue gun? Verified

Glue guns are best suited to glue wood, wood materials, stone materials and fibre materials. Examples of fibre materials are cloth, leather, cardboard and paper. These machines are less suited for glueing glass and plastics.

This was helpful (51) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (2) Read more