Home > Audio, TV & Photo > Home Theater Systems > Klipsch Home Theater Systems > Klipsch RP-6000F II 2.0 Home Theater System

Manual Klipsch RP-6000F II 2.0 Home Theater System

Need a manual for your Klipsch RP-6000F II 2.0 Home Theater System? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

ROOM PLACEMENT CONNECTION

Left and Right Main Channel Speakers — For optimum

performance, Klipsch Group, Inc. (KGI) suggests placing your

speakers 6 to 15 feet (1.8 to 4.6m) apart. They may also be toed-in

slightly for better stereo imaging. The listening position should be

about 1 to 1.5 times the distance separat ing the speakers. Refer to

Figures 1 and 3 for connection and placement.

Center Channel Speakers — Center channel speakers are designed to

place dialogue and primary sounds so that they appear to come from

the video screen. The speakers should therefore be placed as close

to the screen as possible, preferably directly on top of or below the

screen. Refer to Figures 1, 2 and 3 for connection and placement.

Rear Surround Channel Speakers — Klipsch surround speakers should

be placed approximately 2 feet above the listening position. Typically

this will be about 5-7 feet above the floor. The surrounds should be

placed on the walls directly adjacent to the listening position. Another

option would be on the wall behind the listening position. The final

surround speaker placement depends on your room’s characteristics.

They are designed to recreate the sense of space and ambience that

many of today’s surround sound technologies provide. Refer to Figures

1, 3 and 4 for connection and placement.

Conventional Connection — Using 16-12 gauge speaker wire, connect

the RED “positive” (+) terminal of the LEFT speaker to the RED

“positive” (+) terminal of your amplifier’s LEFT channel. Connect the

BLACK “negative” (–) terminal of the LEFT speaker to the BLACK

“negative” (–) terminal of your amplifier’s LEFT channel.

Repeat the above procedure for connecting all remaining speakers to

the appropriate amplifier channels. Refer to Figure 3. Make sure that

no bare wires from any of the connections touch any other terminals

as this could cause a short and damage your equipment.

Reference Premiere models RP-8060FA II, RP-8000F II, RP-6000F II,

RP-5000F II, and RP-600M II are equipped with dual binding posts. If

single wire connection is used, the terminal connecting wire should

remain in place. If Bi-wire or Bi-amp connection is used, the terminal

connecting wire must be removed. Please see your receiver’s manual

for further instructions.

Amplifier Requirements — Klipsch speakers are highly efficient and

will operate easily on a wide variety of amplifiers. All Klipsch speakers

are 8-ohm compatible and can be driven to very high levels with low

distortion. Due to the high output levels Klipsch speakers are capable

of reproducing, exercise caution with the volume control. Excessive

volume over long periods can permanently damage your hearing.

Overdriving your amplifier could also damage your speakers. Check with

your dealer or amplifier manual to make sure your particular amplifier

is best suited to your application. We want you listening for a lifetime.

Rating

Let us know what you think about the Klipsch RP-6000F II 2.0 Home Theater System by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Klipsch RP-6000F II 2.0 Home Theater System?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Klipsch RP-6000F II 2.0 Home Theater System. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Klipsch RP-6000F II 2.0 Home Theater System. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Klipsch. They might be able to provide an original manual. Are you looking for the manual of your Klipsch RP-6000F II 2.0 Home Theater System in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.