Home > Audio, TV & Photo > Speakers > Klip Xtreme Speakers > Klip Xtreme KLS-900 ZounDtastic Pro Speaker

Manual Klip Xtreme KLS-900 ZounDtastic Pro Speaker

Need a manual for your Klip Xtreme KLS-900 ZounDtastic Pro Speaker? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

VI. Advanced operation

Pairing the speaker with wireless devices

VII. Troubleshooting

3. FM radio mode

4. How to use the recording feature

1. Press the MODE button briefly to toggle through the available audio sources and select FM.

2. Press the PLAY/PAUSE button to start scanning for radio stations automatically, in the frequency range

between 87.5 and 108.0MHz.

3. Once the search is complete, the unit will save active stations automatically.

4. Use the and to select stored channels.

1. First, make sure to have a microphone connected to the MIC input.

2. Insert a compatible USB or memory card into the corresponding port, and press the MODE button to

select USB/SD

3. If the USB/SD

card is plugged into the speaker for the first time, this will automatically create a folder

named RECORD to save the files.

4. When you are ready, press the REC button to enable recording. The current sound output will stop, and

the Recording mode will be activated.

5. The device starts recording once the screen displays the timer. Press once more when you wish to stop.

6. To discard a recording, first go to REC Play Mode. Select the recording you wish to eliminate followed by

Delete.

Note: Before installing this product, please make sure your device is compatible with Bluetooth®.

1. Enable the Bluetooth® feature on the selected source and set it to discover the wireless speaker.

2. Place your wireless device and the speaker not more than one meter away from each other.

3. Next, cycle to the Bluetooth® feature on the speaker by pressing the MODE button found on the media

panel and select it as the input source. The BT symbol blinks fast on the display to indicate that the

speaker has entered into the pairing mode.

4. Once the speaker appears listed (KLS-900) under the newly found Bluetooth® devices of your wireless

device, it will ask if you want to pair with it.

5. Accept by pressing Yes or Ok. If you have a lower Bluetooth® version, you may be prompted to enter

the passkey 0000 (4 zeros).

6. When pairing is successful, the BT symbol stops blinking indicating that the wireless connection has been

established. If after 60 seconds the pairing process fails, please repeat steps 1 through 5 described above.

7. You can now start streaming audio through the speaker wirelessly from your favorite Bluetooth®- enabled

devices.

8. The speaker will re-pair automatically to the memorized device when the BT mode is selected on the

unit after being turn off and on again.

Technical specifications

Device

MPN KLS-900

Speaker

Microphone

Maximum Power Output (PMPO)

Reference RMS power

AC input

Buttons

Subwoofer

Driver unit

Reference RMS power

Frequency

Impedance

Sensitivity

Signal to noise ratio

Total Harmonic Distortion (THD)

Tweeter

Driver unit

Reference RMS power

Frequency

Impedance

Sensitivity

Signal to noise ratio

Total Harmonic Distortion (THD)

Microphone

Connectivity

Directivity

Frequency

Impedance

Sensitivity

Connectivity

Connection type

Memory card slot

2000W

200W

100V-240V (±10%) 60/50Hz (autosensing)

REC, Treble, GT VOL,ECHO, REC, Play/Pause, Previous,

Next, VOL, Bass, Mode, Standby, Light SW, Power

Two 12in at 3Ω

120W (60W each)

40Hz-6kHz

3Ω, ±10%

88dB±2dB

≥70dB

1kHz, 0dB (±10%)

Two 4in at 4Ω

80W (40W each)

40Hz-20kHz

4Ω, ±15%

85dB±3dB

≥70dB

1kHz, 0dB (±10%)

Wired and wireless

Unidirectional

40Hz-15kHz

10kΩ

5dB

Bluetooth

compatible

USB/SD

Status Possible cause Solution

The display fails to

turn on

No sound

Distorted sound

The speaker is not connected properly

Power switch not on

Volume adjusted at the lowest level

Wrong input mode selected

Incorrect speaker connection.

Master volume is too high

The speaker is damaged

Decrease the master volume

Check or replace the speaker

Check the connection and plug in the AC adapter

Turn on the power switch

Adjust the volume to a comfortable listening level

Choose the playback mode based on the

external source being used

Check all connections and try again

Rating

Let us know what you think about the Klip Xtreme KLS-900 ZounDtastic Pro Speaker by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Klip Xtreme KLS-900 ZounDtastic Pro Speaker?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Klip Xtreme KLS-900 ZounDtastic Pro Speaker. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Klip Xtreme KLS-900 ZounDtastic Pro Speaker. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Klip Xtreme. They might be able to provide an original manual. Are you looking for the manual of your Klip Xtreme KLS-900 ZounDtastic Pro Speaker in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Klip Xtreme
Model	KLS-900 ZounDtastic Pro
Category	Speakers
File type	PDF
File size	0.3 MB

All manuals for Klip Xtreme Speakers
More manuals of Speakers

Frequently Asked Questions about Klip Xtreme KLS-900 ZounDtastic Pro Speaker

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

I want to connect a speaker to my television with HDMI, which port should I use? Verified

You need to use the HDMI-ARC port, which is specifically made for connecting audio equipment.

This was helpful (1382) Read more

What do the frequencies say about my speaker? Verified

It indicates the range of frequencies that the speaker can produce. A bigger range of frequencies will provide a larger variation in sound en produce higher quality sound.

This was helpful (750) Read more

When is my music too loud? Verified

Sounds over 80 decibel (dB) can start to damage hearing. Sounds over 120 dB immediately damage hearing. The severity of the damage depens on how often and how long the sound is present.

This was helpful (438) Read more

Does bluetooth work through walls and ceilings? Verified

A bluetooth signal will work through walls and ceiling, unless these are made from metal. Depending on the thickness and the material of the wall the signal can lose in strength.

This was helpful (202) Read more

Up to what noise level is it safe for children? Verified

Children get their hearing damaged quicker than adults. Therefore it is important to never expose children to noise louder than 85dB. In the case of headphones there are special models for children. In case of speakers or other situations you have to be watchful the noise does not exceed that level.

This was helpful (187) Read more