Home > Household appliances > Cooker Hoods > KitchenAid Cooker Hoods > KitchenAid KXU2830YSS Cooker Hood

Manual KitchenAid KXU2830YSS Cooker Hood

Need a manual for your KitchenAid KXU2830YSS Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

Tools needed

■ Level

■ Drill

■ ¹⁄₈" (3 mm) drill bit

■ ³⁄₄" (19 mm) drill bit

■ Pencil

■ Pliers

■ Wire stripper or utility knife

■ Tape measure or ruler

■ Caulking gun and weatherproof caulking compound

■ Phillips screwdriver

■ Flat-blade screwdriver

■ T-10 TORX

®†

driver

■ Saber or keyhole saw

■ Vent clamps

■ Metal snips

Parts needed

■ Home power supply cable

■ Two ¹⁄₂" (1.3 cm) UL listed or CSA approved strain reliefs

■ 3 UL listed wire connectors

For vented installations, you will also needed:

■ 1 wall or roof cap

■ Metal vent system

For non-vented (recirculating) installations, you will also

need:

■ Recirculation Kit Part Number W10356918. See the

“Assistance or Service” section to order.

Optional parts needed:

■ Wood filler strips for cabinets with recessed bottoms. Length

and thickness determined by recess dimensions. See the

“Prepare Location” section.

■ Two, 1" x 1" x 5" (25 x 25 x 12.7 cm) wood pieces for cabinet

floor. See the “Prepare Location” section.

■ Four, 1¹⁄₄" (3.2 cm) wood screws

Parts supplied

Remove parts from packages. Check that all parts are included.

■ Damper: Part Number W10369162

■ Hardware package: Part Number W10369160. Includes:

Installation Instructions and Use and Care Guide

2 lower leveling brackets

2 upper leveling brackets

2 - 2.5 x 9.5 mm metal screws

4 - 4.5 x 16 mm wood screws

4 - 5 x 18 mm machine screws

4 - 3.5 x 9.5 mm metal screws

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

Have a qualified technician install the range hood. It is the

installer’s responsibility to comply with installation clearances

specified on the model/serial rating plate. The model/serial rating

plate is located behind the filter on the left rear wall of the range

hood.

Range hood location should be away from strong draft areas,

such as windows, doors, and strong heating vents.

Cabinet opening dimensions that are shown must be used. Given

dimensions provide minimum clearance. Consult your cooktop/

range manufacturer installation instructions before making any

cutouts.

Grounded electrical outlet is required. See “Electrical

Requirements” section.

The range hood is factory set for vented installations through the

roof or wall. For non-vented (recirculating) installations see “Non-

Vented (recirculating) Installation Through the Soffit/Cabinet” in

the “Prepare Location” section. Recirculation Kit Part Number

W10356918 is available from your dealer or an authorized parts

distributor.

All openings in ceiling and wall where range hood will be installed

must be sealed.

For Mobile Home Installations

The installation of this range hood must conform to the

Manufactured Home Construction Safety Standards, Title 24

CFR, Part 328 (formerly the Federal Standard for Mobile Home

Construction and Safety, title 24, HUD, Part 280) or when such

standard is not applicable, the standard for Manufactured Home

Installation 1982 (Manufactured Home Sites, Communities and

Setups) ANSI A225.1/NFPA 501A*, or latest edition, or with local

codes.

†®TORX is a registered trademark of Saturn Fasteners, Inc.

Rating

Let us know what you think about the KitchenAid KXU2830YSS Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the KitchenAid KXU2830YSS Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the KitchenAid KXU2830YSS Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your KitchenAid KXU2830YSS Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact KitchenAid. They might be able to provide an original manual. Are you looking for the manual of your KitchenAid KXU2830YSS Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	KitchenAid
Model	KXU2830YSS
Category	Cooker Hoods
File type	PDF
File size	1.33 MB

All manuals for KitchenAid Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about KitchenAid KXU2830YSS Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1217) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (640) Read more