Manual Kenmore 258.33052310 Fan

Manual

When using electrical appliances, basic safety precautions should always be

taken including the following:

1. Read all instructions before using this appliance.

2. Use fan only for purposes described in the instruction manual.

3. To protect against electrical shock do not immerse unit, plug or cord in

water or spray with liquids and plug the appliance directly into a 120V

AC electrical outlet.

4. Close supervision is necessary when any appliance is used by or near

children.

5. Unplug from outlet when not in use, when moving fan from one location

to another, before putting on or taking off parts and before cleaning.

6. Avoid contact with moving parts.

7. Do not operate in the presence of explosive and/or flammable fumes.

8. To avoid fire hazard, NEVER place the cord under rugs or any parts near

an open flame, cooking or other heating appliance.

9. Do not operate any appliance with a damaged cord or plug after the

appliance malfunctions, or has been dropped/damaged in any manner.

Discard fan or call the following customer assistance number to arrange

for possible product repair: 1-877-777-8065

10. Do not run cord under carpeting. Do not cover cord with throw rugs,

runner, or similar coverings. Do not route cord under furniture or

appliances. Arrange cord away from traffic area and where it will not be

tripped over.

11. The use of attachments not recommended or sold by the appliance

manufacturer may cause hazards.

12. Do not let the cord hang over the edge of a table, counter or come in

contact with hot surfaces or leave exposed to high traffic areas.

13. Do not use outdoors.

14. To disconnect, grip plug and pull from wall outlet. Never yank on cord.

15. Always use on a dry, level surface.

16. Do not operate fan until fully assembled with all parts properly in place.

17. This product is intended for HOUSEHOLD USE ONLY and not for

commercial or industrial applications.

IMPORTANT SAFEGUARDS

FEATURES / OPERATION FEATURES / OPERATION CLEANING / MAINTENANCE CLEANING / MAINTENANCE

IMPORTANT SAFEGUARDS

18. WARNING: To reduce the risk of fire or electric shock, do not use this fan

with any solid-state speed control device.

19. This product employs overload protection (fuse). A blown fuse indicates

an overload or short-circuit situation. If the fuse blows, unplug the product

from the outlet. Replace the fuse as per the user servicing instructions

(follow product marking for proper fuse rating) and check the product.

If the replacement fuse blows, a short circuit may be present and the

product should be discarded or call the following customer assistance

number to arrange for possible product repair: 1-877-777-8065

20. Do not use an extension cord with this fan.

21. For general ventilating use only. Do not use to exhaust hazardous or

explosive materials and vapors.

PLEASE READ AND SAVE THESE

IMPORTANT SAFETY INSTRUCTIONS

INSTALLATION INSTRUCTIONS

NOTE: Make sure you remove all contents from the package. Check packaging for stored

fan parts before discarding.

The window fan comes fully assembled and is ready for immediate installation.

This window fan has been designed to fit double-hung windows with minimum openings of

25.5 inches (65cm) wide and 8 inches (20cm) high.

Horizontal Window Fan Installation

NOTE: This fan is designed and recommended

for installation in the window so that it is

situated behind an existing window screen.

1. Align the Window Fan horizontally in the

window with the controls facing you and

the power cord located on the bottom of

the window fan.

2. Set the fan into your window opening (note

that in most cases the window screen does

not have to be removed or left open).

3. If the fan does not fit snugly to the left

and right of the window casing, open the

Locking Tab (D) by pulling up and pulling

out the Built-In Extender Panel (F) until the

fan sits safely in your window. Re-lock or

close the locking tab after the fan is safely

secured in the window.

4. If the fan still does not fit snugly attach the

Slider Safe

®

Extender Panel located in the

polyfoam packaging in the original box.

Slide out the Rubber Strip (A) from the left

side of the fan - see Figure 2. Then slide the

Slider Safe

®

Extender Panel along the left

side of your Window Fan. Slide the Slider

Safe

®

Extender Panel completely down

the tab until it is flush on both the top and

bottom of the Window Fan. Replace with

the Rubber Cover by sliding down along the

left side of the added Slider Safe

®

Extender

Panel - see Figure 3.

5. To keep the fan in place, carefully close the window so that the bottom edge of the

window rests on the flat area on the top of the fan.

Vertical Window Fan Installation

1. For vertical orientation, install unit using rigid extender panels at the base of window.

2. Set the Fan vertically in your window opening with the left side of the fan situated on the

bottom and the Built-In Extender Panel on top.

3. Set the fan into your window opening (note that in most cases the window screen does

not have to be removed or left open).

4. If the fan does not fit snugly to the top and bottom of the window casing, attach the

Slider Safe

®

Extender Panel and adjust the built-in extender screen until the fan fits

securely in your window.

NOTE: Be sure fan is securely installed in your window at all times. Do not lean or push on

the fan while it is in the window.

OPERATING INSTRUCTIONS

• Plugthefanintoa120VACelectricaloutlet.

• Tostarttheunitandruncontinuously,pushthePowerButton( ) once for the Low setting

(Lo) and press the button twice for the Medium setting (Med), a third press of the button

will switch to High setting (Hi).

• Tostoptheunit,pressandholdthePowerButton( ) for two seconds or you can manually

cycle through all of the speeds until all of the LED indicators are no longer lit.

COMFORT CONTROL THERMOSTAT INSTRUCTIONS

Your fan is equipped with a technologically advanced electronic

thermostat. This feature will automatically turn the fan “ON” or “OFF”

depending on the preset comfort level. The comfort level ranges

between 60° and 80° Fahrenheit.

To take advantage of the electronic thermostat, continue to press the

Power Button ( ) until the desired temperature is reached. The selected

temperature indicator light and either Lo or Med or Hi indicator light

will illuminate. When room temperature drops below the set

temperature, the fan will stop. When the room temperature rises above

the set point, the fan will turn on automatically.

For example, if you set your thermostat to 75 degrees then your fan will

run until the set temperature is reached. Once the temperature rises

above the set temperature the fan will automatically turn on again.

NOTE: The electronic thermostat has memory. The thermostat will remember the previous

temperature setting after the unit has been turned off. However, if the unit is unplugged,

the thermostat will be reset and will no longer remember the previous temperature setting.

KENMORE ONE YEAR LIMITED WARRANTY

If this product fails due to a defect in material or workmanship within

one year from the date of purchase, return it with proof of purchase to

any Sears store or other Kenmore outlet in the United States for free

replacement.

This warranty is void if this product is ever used for other than private

household purposes.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

KENMORE GARANTÍA LÍMITADA DE UN AÑO

Si este producto falla debido a un defecto en material o a la ejecución

en el plazo de un año a partire de la fecha de la compra, deveulvalo con

comprobante de compra a cualquier tienda Sears o un otro Kenmore outlet

en los Estados Unidos para el reemplazo gratis.

Esta guarantía es invalido si este producto se utiliza para con excepción de

los propósitos privados de casa.

Esta guarantía le da los derechos legales especificos, y usted puede

también tener otros derechos que varían de estado a estado.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

Kenmore®

Window Fan

Ventilador de Ventana

Model/Modelo: 258.33052310

Customer Assistance / asistencia al cliente:

1-877-777-8065

Sears Brands Management Corporation,

Hoffman Estates, IL 60179

www.kenmore.com

www.sears.com

www.kmart.com

Use & Care Guide

Manual de Uso y Cuidado

English/Español

CLEANING AND MAINTENANCE INSTRUCTIONS

Follow these instructions to correctly and safely care for your window fan. Please remember:

REPLACEABLE FUSE

If your (5 Amp, 125 Volt) replaceable fuse blows, please order a new fuse at

1-877-777-8065. Follow the below instructions to replace the fuse on the plug.

User Servicing Instructions

1. Unplug your fan. Grasp plug and remove from the receptacle or other outlet device. Do

not unplug by pulling on cord.

2. Open fuse cover, located on the top of the plug, by using your thumb or a flathead

screwdriver to slide the cover down towards the prongs.

NOTE: Ensure that fuse cover is completely open before

attempting to remove fuse.

3. Remove fuse carefully by using a small screwdriver to pry the

fuse out of the compartment by the metal ends of the fuse.

(see Figure 4)

4. Place plug on a solid, flat surface. Insert new 5 Amp, 125 Volt

fuse into fuse compartment and use a small screwdriver to

secure the metal ends of the fuse into the compartment.

CAUTION: Risk of fire. Replace fuse only with 5 Amp, 125

Volt fuse.

5. Slide fuse cover closed completely. If fuse cover is difficult to close, make sure fuse is

secured in place completely by pressing down on metal ends of the fuse.

6. Risk of fire. Do not replace attachment plug. It contains a safety device (fuse) that should

not be removed. Discard product if the attachment plug is damaged.

FAN CLEANING

• Alwaysunplugthefanbeforecleaningordisassembling.

• Donotallowwatertodriponorenterintothefanmotorhousing.

• Besuretouseasoftclothmoistenedwithmildsoapsolution.

• Donotusegasoline,thinnerorbenzeneasacleaner.

• Thefangrillsnotsupposedtobedisassembledbyuser.Recommendtouseasmallpaint

brush and a vacuum to clean the fan blades.

Fan Blade and Front Grill Cleaning

1. Using a Phillips head screwdriver, remove the screws located around the perimeter of the

rear grill. Carefully separate the front and the rear grills from the end opposite the built

in extenders. Do not completely detach the grills as this may damage the extender clips.

Separate only enough to gain access to the blades with one hand.

2. Clean blades and grills with a soft, moist cloth (see above).

3. Securely fasten the grills together.

FAN STORAGE

For all window fans, and fans that come already assembled:

• Itisimportanttokeepitinasafe,drylocation.

• Werecommendusingtheoriginal(orappropriatelysized)box.

• Pleaseremembertoprotectthefanfromdustormoisture.

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider

than the other). To reduce the risk of electric shock, this plug is

intended to fit in a polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the plug. If it still does not

fit, contact a qualified electrician to install the proper outlet.

DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS

SAFETY FEATURE IN ANY WAY.

Figure 2

A

F

E

Figure 3

A

B

F

E

6cm

17cm

6cm

17cm

Figure 1

Horizontal

Vertical

A. Rubber Strip

B. Slider Safe

®

Extender Panel

C. Fan Blades

D. Locking Tab

E. Adjustable Extruded Gasket

F. Built-in Extender Panel

G. Control Panel

A

D

G F

C

B

E

Figure 4

Fuse

Metal ends

Fuse cover

WINDOW FAN ACCESSORIES

Window Fan

Extender Panel

(164241)

To order, visit the web site

www.kenmore.com or call

1-877-777-8065

Rubber Strip

(164243)

Adjustable

Extruded Gasket

(164242)

USE & CARE ASSISTANCE

If you have safety, operation or maintenance questions concerning the use of this product,

call the following customer assistance number: 1-877-777-8065 and reference KWF0522E

P/N 163506

KWF0522E_12ESM1.indd 1 12/11/12 8:43 AM

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Kenmore 258.33052310 Fan. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kenmore. They might be able to provide an original manual. Are you looking for the manual of your Kenmore 258.33052310 Fan in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Kenmore Fans
More manuals of Fans

Frequently Asked Questions about Kenmore 258.33052310 Fan

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Kenmore 405.34036310 Fan

Manual

Kenmore 405.32040510 Fan

Manual

Kenmore 405.35012510 Fan

Manual

Kenmore 258.32002310 Fan

Manual

Kenmore 405.35182510 Fan

Manual

Kenmore 405.35040510 Fan

Manual

Point POFT7036 Fan

Manual

Maico ECA 120 VZ Fan

Related categories