Manual Joustra J46038 Sewing Machine

Manual

J46038

LR6 size «AA»

X4

1.5 V

MAPED.BP 14

74371 Pringy Cedex • France

[email protected]

www.joustra.fr

14

7

2

8

13

12

10

3

11

5

4

1

9

6

ETJ4603800.indd 1 06/03/2019 16:17

SEWING

MACHINE

Safety notes

• Batteries or accumulators must be installed by an adult. Only use batteries

or accumulators that have the required features, noted in the instructions.

Check that the On/Off button is in the OFF position before installing

batteries or accumulators.

• Batteries and accumulators must be inserted according to the + and -

polarity shown on the batteries and on the toy’s battery pack.

• Do not attempt to recharge non-rechargeable batteries.

• Storage cells must only be charged under adult control.

• Storage cells must be removed from the toy prior to being charged.

• Different types of batteries or storage cells, or new and used batteries or

storage cells, must not be mixed.

• Used batteries or storage cells must be removed from the toy.

• Remove the batteries or storage cells from the toy when it is not in use.

• The terminals of a battery or storage cell must not be short-circuited.

• Do not use any liquid products to clean the machine, always use a dry cloth.

• Dispose of used electrical products at a designated treatment center.

Installing the batteries

The batteries or storage cells must be installed by an adult.

Equip yourself with a screwdriver.

Conrm that the switch is in the OFF position.

Unscrew and remove the cover of the battery compartment.

Insert the batteries (sold separately) so that they correspond to the

polarity diagram (+/-) inside the compartment.

Type of batteries to use: 4 LR6 / Rated voltage: 6V / direct current.

Return the cover and tighten the screw.

For any After-Sales enquiries,

please go to www.joustra.fr

and ll in the form in the «NOUS CONTACTER» tab.

To sew

• This sewing machine is ready to be used.

• We advise you to practice until you feel ready to start your rst

project.

• Conrm that the switch is in the OFF position. Ask an adult to

connect the pedal

4

to the pedal connection socket.

• Lift up the presser foot

3

by lifting up the lever

13

that is located

in back of the machine. Place the fabric under the presser foot

in the position where you wish to start sewing and pull down

the lever. Switch on your machine

1

on the slow setting (L)

2

.

• Firmly place your ngers on each side of the fabric to ensure

control over the direction of the stitches. Lightly press on the

pedal

4

to start sewing. Slide the fabric through at a slow,

regular rate. Do not try to force the fabric as it is fed, as doing

so could damage the needle.

• Next, try to sew a corner of the fabric. Position your ngers on

the fabric as previously indicated and gently turn the fabric with

your ngers to the left or right, by controlling the operation with

your ngers.

• Stop sewing just before reaching the edge of the fabric. Shut off

the machine (OFF)

1

when the stitches are done.

• Lift the needle above the presser foot

3

by turning the ywheel

6

. Lift the presser foot using the lever

13

and remove the fabric

from the sewing machine. Cut the thread approximately 10 cm

from the edge. Ask for help from your parents to cut the thread.

• Put the two threads on the same side and tie a small knot to

nalize the sewing.

Threading the sewing machine (to be done by an adult)

• Conrm that the switch is in the OFF position

1

.

• Place a spool on the stand

12

.

• Lower the presser foot

13

and lift the needle to its highest position by manually turning

the ywheel

6

. Push the needle’s safety mechanism towards the back with your

parents’ help.

• Thread the sewing machine as shown in the sewing machine diagram.

• Once this operation is done, it is IMPERATIVE to close the safety mechanism again with

your parents’ help.

• Thread the needle and then pass the thread under the presser foot

3

and pull it to the

back, leaving approximately 10 cm.

• The thread of the spool that is located in the spool housing

11

must also be pulled

towards the back of the machine.

Spool rewinding

• Do not leave fabric on machine.

• Take out the telescopic reel holder

8

located on the machine and place a full spool of

thread on it.

• Pull out the pinlocated in the middle of the ywheel

9

by pressing on it and turning it

towards you.

• Place your empty spool on it.

• Push it well, make a quarter turn backwards to block it

• Wind the thread several times counter clockwise around your empty spool, and then

place the spool on the pin.

• Using the slow setting (L)

2

, switch on your machine and then gently press on the

pedal.

• Once you are done rewinding, turn off the machine (OFF).

Replacement of the spool

• Conrm that the switch is in the OFF position

1

.

• Lift the presser foot

13

and remove the slide plate from the spool housing

11

.

• Insert the spool, with the thread oriented counter clockwise.

• Turn the ywheel

6

towards you until the needle is again completely visible.

• Lift up the presser foot

13

.

• Gently pull the top thread to the back, in order to draw the thread from the spool from

below.

• Pull both threads to the back of the presser foot, leaving approximately 10 cm.

Besoin d'aide ?

• The machine does not work: check the placement of the batteries

(+/-). Check that the pedal is engaged. The batteries must be

changed.

• The sewing machine is jammed: conrm that the thread is not

jammed in the lower part of the machine.

• The thread breaks: the tension regulator must be loosened

4

. The

fabric is too thick, change fabric.

• The needle is bent : must be changed.

WARNING !

To be used under the direct supervision of an adult. For children

over 8 years of age only. Keep out of reach of children under 8 years

Warning! This toy uses sharp needles. Risk of injury. Failure to

observe the safety instructions results in exposure to the danger of

injury. Uses 4 x LR6 batteries. Not included. Retain the instructions

and information sheets. Read the instructions before use and follow

them with care. Details and colours subject to variation. Photos and

illustrations are not contractual.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Joustra J46038 Sewing Machine. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Joustra. They might be able to provide an original manual. Are you looking for the manual of your Joustra J46038 Sewing Machine in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Joustra Sewing Machines
More manuals of Sewing Machines

Frequently Asked Questions about Joustra J46038 Sewing Machine

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

AEG NM 1714 Sewing Machine

Manual

Baby Lock BLBA Ballad Sewing Machine

Manual

Alfa Next 840 Sewing Machine

Manual

Baby Lock BLTA Altair Sewing Machine

Manual

Juki MO-104D Sewing Machine

Manual

Veritas Amelia Sewing Machine

Manual

Husqvarna 500 Sewing Machine

Manual

Brother XL-3000 Sewing Machine

Related categories