Home > Hobby & Leisure > Sewing Machines > Jata Sewing Machines > Jata MC740 Seleccion Sewing Machine

Manual Jata MC740 Seleccion Sewing Machine

Name: Jata MC740 Seleccion Sewing Machine
Brand: Jata
SKU: MC740 Seleccion
Rating: 32 (28 reviews)

Need a manual for your Jata MC740 Seleccion Sewing Machine? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 22 comments and has 28 votes with an average product rating of 32/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

MANUAL DE INSTRUCCIONES

INSTRUCTIONS MANUAL

Manual de instruções

Mod. MC740

740

Rating

Let us know what you think about the Jata MC740 Seleccion Sewing Machine by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Jata MC740 Seleccion Sewing Machine?
Yes No

32%

68%

28 votes

Join the conversation about this product

Here you can share what you think about the Jata MC740 Seleccion Sewing Machine. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Ana paula 17-04-2020
When sewing it doesn't do the seam just right, it does a lot in the bottom seam, can someone tell me why, I would really appreciate your help, I waste more time with this than sewing, thank you

reply | This was helpful (20) Read more (Translated by Google)

Peres Pereira 01-09-2021
Most of the time, the so-called tangle occurs due to incorrect adjustment of the thread tensions, namely the lower thread, that is, the bobbin case thread (spool). With a thin screwdriver adjust the small screw of the bobbin case. For this adjustment there are videos on You Tube that explain how to adjust.

This was helpful (0) (Translated by Google)

Margarida Peixoto 21-12-2019
I have a Jata Mc740 machine and the top thread is always breaking I can't sew more than 5 cm in a row

reply | This was helpful (15) Read more (Translated by Google)

Peres Pereira 01-09-2021
The defect could be the thread quality, there could be a problem with the thread tension, and it could also be the needle quality. Experiment with a line of 100% polyester or mercerized cotton. Try changing the needle for one of recognized brand and quality (Singer, Schmetz or Milward). With the presser foot raised, try to pull the thread back and forth and check if the tensioner holds the thread; do not catch the thread when with the presser foot raised.

This was helpful (0) (Translated by Google)

Vera 10-01-2020
I bought the machine has it but the needle doesn't pull the bobbin thread up, I can't even sew. Am I sick of trying and it doesn't give you at all what could be?

reply | This was helpful (8) Read more (Translated by Google)

Paulo Torres 06-11-2020
Good afternoon, already managed to solve this problem, because I have the same problem.

This was helpful (0) (Translated by Google)

Peres Pereira 01-09-2021
It is not normal for this to happen if the needle position is fine tuned in relation to the looper. It may be necessary to remove the front cover of the machine head and actuating the screw of the support that holds the connecting rod to the needle support rod, unscrewing it with a hexagonal wrench and positioning it a little lower or higher until solve the problem. In other words, raise or lower the needle support rod a little in relation to the drive rod.

This was helpful (0) (Translated by Google)

Elisabete 18-01-2021
The thread at the bottom winds, leaving the seam with accumulated thread, other times the machine jams. How to solve the problem since I have this machine for half a year. My thanks

reply | This was helpful (1) Read more (Translated by Google)

Peres Pereira 02-09-2021
I work with an identical machine and I know the mechanics of this machine pretty well, which I report to be quite good and resistant, better than some of reputable manufacturing brands in China and/or Vietnam. If this problem happens, there is some mismatch in the settings that any machine mechanic will solve very easily.

This was helpful (0) (Translated by Google)

Debora 11-08-2020
I have the same machine for 7 months and in this time the machine has already caused me the same problem twice , I changed lines , I cleaned everything and the top line part or the bottom line curls all over , other times the machine jams it does not even work and I can not bake more than 5cm in a row, or part or jam, if someone can help me, I'm very grateful. Thanks

reply | This was helpful (0) Read more (Translated by Google)

Peres Pereira 02-09-2021
Normally, on all machines, if the upper thread breaks, either the tensioner is too tight, or the needle is of poor quality (there is a burr in the needle hole) or the thread is of poor quality what if all these defects if they combine, it is not possible to sew. The phenomenon of the thread winding at the bottom of the seam is called tangle and most of the time has to do with the adjustment of the tension of the bobbin case (lower thread).

This was helpful (0) (Translated by Google)

Amélia Marques 25-04-2021
I would like you to send me the instruction manual for the Jata 740 sewing machine in Portuguese to the following address. [email protected]

reply | This was helpful (0) (Translated by Google)

maria filomena fonseca 10-06-2021
I would appreciate it if you send me the instruction manual of the JATA 740 machine, in Portuguese, so that I can take advantage of its use. Thanks

reply | This was helpful (0) Read more (Translated by Google)

Peres Pereira 02-09-2021
Just download the manual that is right here on this page.

This was helpful (0) (Translated by Google)

Peres Pereira 02-09-2021
I report that this product is quite good from a mechanical point of view. Compared to other machines from reputable brands and for the domestic segment, it is not far behind. It is a machine very well equipped with conveniences and with adequate power for sewing thin fabrics and with the indicated needle (100/110) it sews even jeans. It is for sewing every day but not every day. Too bad it doesn't have an automatic threader and it doesn't do a buttonhole in one step-some people prefer it.

reply | This was helpful (0) (Translated by Google)

Fernando 06-12-2021
Can someone tell me the weight of the machine there are differences

reply | This was helpful (0) (Translated by Google)

Ana Barqueiro 06-12-2021
Because the wheel of my machine sometimes when I stop to start it pushes and goes backwards, has anyone else had this problem? Thanks

reply | This was helpful (0) (Translated by Google)

Elisabete 30-11-2022
Whenever I want to sew I can't, because the running stitch is underneath

reply | This was helpful (0) (Translated by Google)

Dulce Rodrigues 10-01-2023
When does the stitch get looser or tighter from the stitch adjuster?

reply | This was helpful (0) (Translated by Google)

Lucie 31-05-2023
Do not assign passer to points S1 and S2 needed clarification

reply | This was helpful (0) (Translated by Google)

Maria 26-09-2023
How do I unlock figure 18 the wheel on the right side thanks

reply | This was helpful (0) (Translated by Google)

Maria das graças silva 04-10-2023
I would like to have the manual in Portuguese for the Jata 740 brand machine.

reply | This was helpful (0) (Translated by Google)

More about this manual

We understand that it’s nice to have a paper manual for your Jata MC740 Seleccion Sewing Machine. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Jata. They might be able to provide an original manual. Are you looking for the manual of your Jata MC740 Seleccion Sewing Machine in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Jata
Model	MC740 Seleccion
Category	Sewing Machines
File type	PDF
File size	4.92 MB

All manuals for Jata Sewing Machines
More manuals of Sewing Machines

Frequently Asked Questions about Jata MC740 Seleccion Sewing Machine

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What size needle should I use? Verified

The size of the needle depends on the fabric. For a thicker fabric, you will need a thinker needle. The application of the needle of often mentioned on the packaging.

This was helpful (1122) Read more

I have checked everything, but my sewing machine thread keeps breaking, what can I do? Verified

If the upper thread of the machine keeps breaking where the needle enters the fabric, it could be that the needleplate or bobbin case have minor damages in the form of scratches and/or sharp edges. These minor damages can cause the thread to break after a few stitches.

This was helpful (1045) Read more

How long does a sewing machine neelde last? Verified

This varies between manufacturers, but in general a needle will last about 8 hours. It might take longer for the needle to break, but before that it will have become blunt and might damage the fabric.

This was helpful (530) Read more

My needle keeps breaking, what is causing this? Verified

There can be various reasons for this. The needle may not be the correct one for the selected fabric, the needle may have been set too low, the fabric may not be properly guided or the bobbin case may be placed incorrectly.

This was helpful (491) Read more

Do I need to turn my sewing machine completely off to replace the needle? Verified

You can change the needle after turning off the product with the on/off switch. When cleaning the product you should disconnect it from the power supply.

This was helpful (378) Read more