Home > Miscellaneous > Tattoo Machines > Ink Machines Tattoo Machines > Ink Machines Dragonfly X2 Tattoo Machine

Manual Ink Machines Dragonfly X2 Tattoo Machine

Need a manual for your Ink Machines Dragonfly X2 Tattoo Machine? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Troubleshooting guide

If you experience problems with the machine you can consult the troubleshooting guide or

Symptom

Possible cause

Possible Solution

The Motor  does not start

when the power is on but the

Eccenter  can be

turned around (normally) by

hand. ( Electrical fault )

None or to low input

voltage.

Bad cable or power supply.

Bad connection.

Bad connection between the

RCA contact  and the

motor.

Increase voltage (max 13 volts).

Make sure the power supply delivers the

right current. Consult manual if

necessary.

Check clip cord or RCA cable. Replace

if necessary.

Make sure the contact screws are not

loose, tighten the following:

Contact screw motor negative (-) 

Contact screw binding post negative

(-) 

Contact screw cord positive (+) .

Loosen the RCA nut  and unscrew

the RCA contact . Remove possible

oxide by sanding the tip of the contact

that engages with the contact plate of

the motor. Clean the contact plate

(visible through the threaded hole) with

alcohol on a cotton bud. Turn the RCA

contact until the tip touches the contact

plate gently. Tighten the nut gently also.

Tighten gently

Rating

Let us know what you think about the Ink Machines Dragonfly X2 Tattoo Machine by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Ink Machines Dragonfly X2 Tattoo Machine?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Ink Machines Dragonfly X2 Tattoo Machine. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Ink Machines Dragonfly X2 Tattoo Machine. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Ink Machines. They might be able to provide an original manual. Are you looking for the manual of your Ink Machines Dragonfly X2 Tattoo Machine in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.