Home > Miscellaneous > Tattoo Machines > Ink Machines Tattoo Machines > Ink Machines Dragonfly X2 Tattoo Machine

Manual Ink Machines Dragonfly X2 Tattoo Machine

Need a manual for your Ink Machines Dragonfly X2 Tattoo Machine? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

When the stroke has been selected and the pin is in the correct position tighten the screw just

a bit. Twist the screw driver and the Eccentric pin back and forth to make sure that the screw

seats on a flat part of the Eccenter pin. There is one flat part for each stroke position as you

can see on the cut through section of the Eccenter below. Do not over tighten the screw.

Note: the Dragonfly machine naturally stops in the upper position with needles retracted in

the tip when the Stay up spring  is present. The X2 version is slightly different than the

previous Dragonfly. When set with short stroke there is no difference, the stroke goes all the

way up when the motor is not running. For the standard 3.7mm the stroke stops 0.5mm before

the top position and the long stroke 4.5mm stops 0.9mm from the top position when the motor

is not running. This is due the damper in the cap. When the motor is running the stroke will

pass this position and take advantage of the whole stroke length. This should be accounted for

when setting up the needle in the tip. The pictures below shows the upper positions with

different stroke length settings.

Upper stop positions

2.6mm 3.7mm 4.5mm

Rating

Let us know what you think about the Ink Machines Dragonfly X2 Tattoo Machine by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Ink Machines Dragonfly X2 Tattoo Machine?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Ink Machines Dragonfly X2 Tattoo Machine. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Ink Machines Dragonfly X2 Tattoo Machine. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Ink Machines. They might be able to provide an original manual. Are you looking for the manual of your Ink Machines Dragonfly X2 Tattoo Machine in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.