Home > Home & Decoration > Cots > IKEA Cots > IKEA SUNDVIK Cot

Manual IKEA SUNDVIK Cot

Name: IKEA SUNDVIK Cot
Brand: IKEA
SKU: SUNDVIK
Rating: 79 (105 reviews)

Need a manual for your IKEA SUNDVIK Cot? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 54 comments and has 105 votes with an average product rating of 79/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

SUNDVIK

Rating

Let us know what you think about the IKEA SUNDVIK Cot by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the IKEA SUNDVIK Cot?
Yes No

79%

21%

105 votes

Join the conversation about this product

Here you can share what you think about the IKEA SUNDVIK Cot. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Louise 06-01-2020
Hello, It doesn't seem to me that the kit contained a board for when the child grows up and we want to remove the bars ... where can we get it? Thank you

reply | This was helpful (128) Read more (Translated by Google)

Elodie 14-06-2020
Have you found the white board? We don't have it in the conversion kit either ... just the screws.

This was helpful (67) (Translated by Google)

Kit conversion 08-06-2020
Hello Did you have an answer please because we are also looking for one? Thank you

This was helpful (31) (Translated by Google)

Torres tavernier 27-11-2020
Hello or we can buy this board because it was not part of the bed when I bought it

This was helpful (23) (Translated by Google)

Durand emilie 24-09-2019
Hello, Is it possible to obtain a complete kit of screws for this model of bed? We have to reassemble it but we have lost all the screws ...

reply | This was helpful (94) (Translated by Google)

Kinou 11-01-2021
Hello, I miss the part that we put when we remove one of the sides with bars Can I order it?

reply | This was helpful (56) (Translated by Google)

Gabriela tuduruta 01-05-2020
Hi then I was given the sundvik cot but the bottom part is missing for when the little one will grow up to remove the side board I would like to know if I can buy it from you and how much it costs thanks a lot. I miss the wood that holds the bed for when if takes away a sbara

reply | This was helpful (40) (Translated by Google)

Tilinou 29-09-2019
Hello Did you get an answer because we are in the same situation as you (we are missing 4 screws to reassemble it) thank you

This was helpful (14) (Translated by Google)

Iman 26-01-2022
Ask for the missing defects on the ikea site with the references that are in the manual or directly from ikea

This was helpful (0) (Translated by Google)

gle 12-04-2019
what is the dimension of the wooden dowels

reply | This was helpful (17) (Translated by Google)

Flavia Sciarini 05-07-2021
I have a Sundvik cot but I miss the base when I take off one of the sides. Can I take this piece? Basically I miss the wood that holds the bed for when I remove the bar. Thank you

reply | This was helpful (15) (Translated by Google)

Audrey E 04-10-2021
Hello, It seems to me that we did not have the conversion kit .... Where can we get it or at least the board? Many thanks in advance! Audrey

reply | This was helpful (13) (Translated by Google)

Roxane 09-02-2021
Hello I have a problem with the box spring, it is smaller than the bed, so it is impossible to put the rods in the holes provided ... (step 5) A solution or has it already happened to someone ??? thanks in advance

reply | This was helpful (11) (Translated by Google)

Kristoffer 11-06-2021
Can you only get the part that makes you have an open solution on the page? I then have to remove one side, but still need a plank to fasten in the corners.

reply | This was helpful (6) (Translated by Google)

Isabel 14-03-2020
Dust collects under the mattress and I can't clean it because the fabric is there. Do I have to disassemble it whole?

reply | This was helpful (3) (Translated by Google)

Gokcin kilic 12-08-2020
Hello, my sundvik bed apparatus is missing, how can I get it?

reply | This was helpful (3) (Translated by Google)

Nichole Evans 07-10-2021
Recieved the crib but am missing a bunch of hardwear and no instructions. Not sure if I have all the pieces as I have no instructions.

reply | This was helpful (2)

Go 28-10-2021
Good

reply | This was helpful (2)

Konta 01-05-2022
Hello., What materials are your cots made of? We would like to know more about this. Thanking you

reply | This was helpful (2) (Translated by Google)

Massoué Marina 20-09-2022
Hello, I would like to buy the set of screws for the sundvik cot please, because with my move, it is impossible to get my hands on it. Can you tell me how to do it and the price please? Cordially

reply | This was helpful (2) (Translated by Google)

Bea Castro 26-03-2020
From the sundkiv crib I need the small table to make it co-sleeping. How could I get it? Thank you

reply | This was helpful (1) Read more (Translated by Google)

Orlando González 07-08-2020
Ask at the IKEA store itself to see if they sell you that loose table or they can tell you where to get another similar table. Ultimately, if you can't get it, I can give you the dimensions of the board and the holes where the dowels and screws go so that you can ask a carpenter (or ask inside the Leroy Merlin store) to make one for you. In this case, put your email address to write to you.

This was helpful (5) (Translated by Google)

Orlando González 07-08-2020
What I did was to make 4 more holes (with a drill) in one of the edges of the two solid boards (the ones located on the head and foot of the crib) equal to those that the small board has on its edges, to the same height and with the same depth and diameter, in order to be able to position it so that its upper edge is flush (at the same height) as the upper edge of the crib mattress support when it is placed in the upper part. That way the dangerous hole is covered!

This was helpful (2) (Translated by Google)

Orlando González 07-08-2020
On the other hand, in the manual itself there is a drawing of the crib, mounted with the mattress support in the upper part and that small table in the lower part, which is crossed out with a large X, which means that the manufacturer It does not recommend doing this type of assembly, I suppose because of the danger of the baby falling, since in principle that table is only intended as a kit to convert the crib into a small bed when the child grows, putting the mattress support also in the part come down.

This was helpful (1) (Translated by Google)

Orlando González 07-08-2020
If you do that assembly that I mentioned before to co-sleep, you run the risk of leaving a dangerous gap between the crib and your bed, even if you tie the crib to the bed in any way, since the mattress support does not rest on the edge of the the solid boards (those that do not have the shape of a fence near the head and feet of the baby or child) but the holes where this support rests are further inside, since it is designed so that the side boards are placed on the edge grate type.

This was helpful (1) (Translated by Google)

Orlando González 07-08-2020
If you leave that gap and only cover it with a large crib mattress, you run the risk that the mattress itself will give with your weight, when picking up or leaving the baby in the crib at night, for example, or with the weight of the baby itself. baby if he gets close to the bed, so he may hit the edge of his bed when the edge of the crib mattress goes through that hole. For this reason, as my wife also wanted to co-sleep with that crib, I modified the design of the crib. Doing so loses the warranty.

This was helpful (1) (Translated by Google)

V 03-05-2021
Notice

reply | This was helpful (1) (Translated by Google)

Aziz boukhari 24-11-2021
Hello I don't have a manual

reply | This was helpful (1) (Translated by Google)

Sara 27-12-2019
What does conversion set mean ?

reply | This was helpful (0)

Emma Husson 13-03-2021
Hello, I lost the manual and I cannot put the box spring on, what should I do? Thank you

reply | This was helpful (0) (Translated by Google)

Ste Fan 08-05-2021
Is there also the side part (bed frame side part) for an Ikea Sundvik bed as a spare part? This part has no number in the assembly instructions

reply | This was helpful (0) (Translated by Google)

Kggb 04-09-2021
Gfg

reply | This was helpful (0)

Przemek 09-09-2021
Hello, I need a screw for the Ikea sundvik crib

reply | This was helpful (0) (Translated by Google)

Bob 12-09-2021
Can’t close this box yet hehn

reply | This was helpful (0)

[email protected] 04-10-2021
Hgbjkk

reply | This was helpful (0) (Translated by Google)

Bfb 12-11-2021
Fbfb

reply | This was helpful (0) (Translated by Google)

U 15-12-2021
Gg

reply | This was helpful (0)

Анастасия 27-12-2021
Hello! There is a detail on page 16 that we don't have. May I know its dimensions?

reply | This was helpful (0) (Translated by Google)

Ionut Vasilescu 16-04-2022
Fnsns

reply | This was helpful (0) (Translated by Google)

Valentina 24-04-2022
Hello, I lost the anchors for the sundvik cot. What size are they? Thanks

reply | This was helpful (0) (Translated by Google)

Giusepoe 11-09-2022
Can I have a replacement SUNDVIK cot?

reply | This was helpful (0) (Translated by Google)

Giusepoe 11-09-2022
where can i find the replacement SUNDVIK cot?

reply | This was helpful (0) (Translated by Google)

Ester 15-09-2022
Good morning, It does not seem to me that the kit contained a tablet for when the child grows up and we want to remove the bars ... where can we find it?

reply | This was helpful (0) (Translated by Google)

AUdrey Gouache 28-09-2022
Hello, I would like to know what the height under the sundvik bed? Thanks ! Audrey

reply | This was helpful (0) (Translated by Google)

Fabienne mathieu 16-11-2022
Where to find the answer for the missing board on the Sundvik cot bed

reply | This was helpful (0) (Translated by Google)

Essy 03-01-2023
I bought a second hand crib i saw the model number but I can't find any manual instructions online

reply | This was helpful (0)

mary 01-06-2023
Can wheels be added to the crib? do they have them in the store?

reply | This was helpful (0) Read more (Translated by Google)

Orlando González 02-06-2023
The crib comes without wheels from the factory and as far as I know Ikea doesn't have wheels for that crib. You can go to one of their stores to ask if they have a wheel kit that can be fitted to it, mainly to keep your warranty if you bought it recently.

This was helpful (1) (Translated by Google)

Orlando González 02-06-2023
But if you know that it is no longer under warranty and you are a bit of a handyman, or you know someone who is, you can try to buy a kit with 4 swivel wheels at a hardware store or similar that will serve that crib. . You just have to check the size of the rectangle of the base of the legs (length x width) to be sure that the wheels are not bigger and can be fixed well to that base.

This was helpful (1) (Translated by Google)

Orlando González 02-06-2023
The wheels cannot be much smaller than the base of the crib legs either, otherwise they would not support the weight of the crib, would not turn well and there would be a risk of breakage or accidents! My recommendation is that, if you buy them on your own, opt for the highest quality ones that offer a guarantee of durability. For example, I have nothing against oriental people, but in their stores, in general, the quality is, to say the least, doubtful, from my own experience.

This was helpful (1) (Translated by Google)

Popa Bogdan 16-02-2024
Hello..can I order the assembly kit? I mean screws. Thank you

reply | This was helpful (0) (Translated by Google)

Łukasz 21-02-2024
Hello, to make a bed by taking out one of the longer sides, the set should include a board to fasten the sides?

reply | This was helpful (0) (Translated by Google)

More about this manual

We understand that it’s nice to have a paper manual for your IKEA SUNDVIK Cot. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact IKEA. They might be able to provide an original manual. Are you looking for the manual of your IKEA SUNDVIK Cot in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	IKEA
Model	SUNDVIK
Category	Cots
File type	PDF
File size	0.95 MB

All manuals for IKEA Cots
More manuals of Cots

Frequently Asked Questions about IKEA SUNDVIK Cot

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.