Home > Home & Decoration > Wardrobes > IKEA Wardrobes > IKEA PLATSA Wardrobe

Manual IKEA PLATSA Wardrobe

Name: IKEA PLATSA Wardrobe
Brand: IKEA
SKU: PLATSA
Rating: 34 (94 reviews)

Need a manual for your IKEA PLATSA Wardrobe? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 40 comments and has 94 votes with an average product rating of 34/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

PLATSA

Rating

Let us know what you think about the IKEA PLATSA Wardrobe by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the IKEA PLATSA Wardrobe?
Yes No

34%

66%

94 votes

Join the conversation about this product

Here you can share what you think about the IKEA PLATSA Wardrobe. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Jumila 28-02-2021
Hello ;) We have a problem with the bottom drawer (supposedly to be drilled in the 2nd hole) but not even the bottom of the first drawer is clear with the distances.

reply | This was helpful (63) Read more (Translated by Google)

Nicos 02-04-2021
Hi there, how did you solve the problem? Annoying and messing around with it ...

This was helpful (33) (Translated by Google)

Horst L 24-08-2020
Applies to Platsa cabinet 60X55X180, unfortunately the rear wall cannot be mounted !! Pushing does not work, sits too tight. Laying it on top and inserting it into the groove does not work either because the material is so unstable that it pulls apart in the middle like with O legs. I've got every piece of IKEA furniture up until now, but this is where I put the cards.

reply | This was helpful (28) Read more (Translated by Google)

Barbara 15-11-2020
After hours of struggle the solution, you have to put the back wall at the very beginning !!! Place in the groove on both sides and simply slide.

This was helpful (20) (Translated by Google)

Marina 02-10-2020
Same problem here!

This was helpful (5) (Translated by Google)

Jana 23-10-2020
I have the same problem

This was helpful (0) (Translated by Google)

Maria 11-03-2022
How do you apply the handles to the blackboard doors for the Platsa children's wardrobe if there are no holes?

reply | This was helpful (20) Read more (Translated by Google)

Rafael 24-02-2023
It happens exactly the same

This was helpful (0) (Translated by Google)

Juanfra 23-12-2021
We bought a 60×55×180 silver wardrobe with two small drawers and one large one and they do not fit properly with the doors

reply | This was helpful (19) (Translated by Google)

Thomas 05-04-2021
With my smastad / platsa 60x57x123cm I can't get the last drawer in, can someone help me?

reply | This was helpful (11) (Translated by Google)

Mimi 12-12-2022
Can we cut a piece of furniture that is too big, Plata brand

reply | This was helpful (4) (Translated by Google)

Werner I 26-02-2021
Also had tantrum. Do not go into the groove! For the first closet, I just cut it through. Of course, I have to put it back together again afterwards. Possibly seal with silicone or acrylic. Better: Before installing, work on the folded back wall with 120 grit emery paper, i.e. sand down the outer edge of the back wall a little, then it cuts off how great.

reply | This was helpful (3) (Translated by Google)

Tiziano Bononcini 27-11-2021
The part of fixing it to the wall, in point 10, is incomprehensible. It doesn't say how long the screws should be. It is not indicated where to drill the bottom of the cabinet: from the instructions, in fact, it seems that the screws must go exactly where the two knobs of point 8 are. Almost as if they were to be drilled (I doubt). We will eventually come up with an alternative fixation, using leftover pieces from the Billy bookshelves. Bad, anyway ... not to mention the arrow handle screws ...

reply | This was helpful (2) (Translated by Google)

Jutta Favara 26-02-2019
I bought the Spildra cover plate for my Platsa cabinet, but I don't know how to attach it to the cabinet. The instructions from the cabinet do not mention anything about it and the cover plate is nothing except 4 dowels and 4 pins. Who can help me?

reply | This was helpful (0) Read more (Translated by Google)

Angelika Meier 11-11-2020
I am sure that by now you have solved your problem. . But I would like to answer anyway, in case others are looking for an answer and come across this post, like me. The attached dowels have a thread that I can screw into the metal counterparts in the body. Then place the cover plate in such a way that the holes in the cover plate overlap the dowels. Now push the attached pins through the small holes from the inside of the body.

This was helpful (12) (Translated by Google)

Heijblom 26-10-2019
It seems very simple, but placing the back wall is a disaster if you have a high cabinet

reply | This was helpful (0) Read more (Translated by Google)

Marcel Buskermolen 08-02-2020
Totally agree. I am able to send hemb back. Why not just use nails? This is not doing. Just arouses my aggression!!!

This was helpful (9) (Translated by Google)

Dorien 29-11-2020
Anyone have any tips on how to do that? Is now also in phase 'aggression'

This was helpful (1) (Translated by Google)

C.Engel 29-03-2021
How did you finally manage to do this? Started yesterday with the high cabinet and the back is indeed a disaster! Would love to hear your tips...

This was helpful (0) (Translated by Google)

Tomasz 07-06-2023
Look at the shorter sides - 2 plastic screws are not symmetrically set - so the clue is to chose right side.

This was helpful (0) (Translated by Google)

[email protected] 15-06-2020
exploding man... can't get the doors straight. what screws do you tighten?

reply | This was helpful (0) (Translated by Google)

Ine wolters 17-07-2020
Wanted tip for removing the stickers from platsa wardrobe Ikea. Acetone . I have already tried hot water etc

reply | This was helpful (0) (Translated by Google)

Carme 12-10-2020
Is the platsa metal structure easy to assemble?

reply | This was helpful (0) (Translated by Google)

Steffi 27-12-2020
Hi, the back wall is stuck with us and doesn't move a millimeter any more. Does anyone have a hint?

reply | This was helpful (0) Read more (Translated by Google)

Daniel 14-01-2021
Same problem here. The back wall cannot be inserted into the milled joints. I have two explanations for this: 1. The joint is too small, which is extremely unlikely. 2. The panels have been stored in a humid climate and the wood has swollen. I will use a dehumidifier and hope that this can solve the problem. IKEA should fix this or communicate accordingly.

This was helpful (0) (Translated by Google)

Verena 08-02-2021
Hi there, does anyone know what you need the "SPILDRA cover plate for corpus" for? There are no floors so that you get a kind of "compartment" / shelf. I have just gone through my order list and it is really a mystery to me why I should need the mentioned cover plate 2x in my closet (code: BVL4RP), even though I have not integrated any shelves ... If anyone has an idea, thank you in advance!

reply | This was helpful (0) Read more (Translated by Google)

Hanno Sennholz 02-03-2021
I also came across it, they are probably only intended as a visual finish to the UPPER SIDE of the cupboard, so you can easily attach them to the top of the body. Quote IKEA: "Is placed on low basic elements - as a cover plate or to create a practical bench." I first removed them from my order list (were automatically added by the closet planner, but also for the closet combinations over 2m, so no one looks at it from above or sits down ...)

This was helpful (6) (Translated by Google)

Mai 26-02-2021
I asked myself exactly the same question ... Does anyone have an answer?

This was helpful (0) (Translated by Google)

Katharina 09-04-2021
We set up two Platsa combinations last year and did NOT have any of these plates with us. The cabinet stands well and is stable enough. Of course, I don't know whether IKEA has fundamentally changed anything in the material. If it's the same as it was a year ago, it's enough without these extra plates ... We normally have a box on the cupboard ... Maybe you can try it without and buy another record?

This was helpful (0) (Translated by Google)

Monica 25-03-2021
I can't take apart a platza cabinet

reply | This was helpful (0) (Translated by Google)

Katharina 09-04-2021
Hello, I installed the sliding doors in two Platsa cupboards. Now a door in a cupboard grinds completely, it can only be moved with effort. With the other cupboard everything is OK, so basically I have understood how to install the doors correctly ;-) ... I have already loosened the screws at the top of the door on the dragging door and raised the door as far as possible. Yet she keeps dragging. Did I miss something?

reply | This was helpful (0) Read more (Translated by Google)

Fabian 30-05-2021
Got the same problem. One closet runs perfectly, the second jerks and jams. Have you already found a solution?

This was helpful (0) (Translated by Google)

Joséphine carré 18-05-2021
We can't find the legs of the wardrobe

reply | This was helpful (0) (Translated by Google)

Maria Loesche 16-06-2021
This shelf is awful. Putting it together is a pain.

reply | This was helpful (0) (Translated by Google)

Scialom Marc antoine 07-11-2021
Problem. To fit the ikea plata cabinet frame

reply | This was helpful (0) (Translated by Google)

Alma 09-04-2022
I have assembled the Smastad/Platsa chest of drawers and when it comes to inserting the drawers they get stuck and you have to exert force to insert them. The only one that fits well and smoothly is the bottom one (there are four small drawers and two large ones below). I have looked to see if we have assembled something wrong and no, it seems that the screws collide with the wheels when entering but we cannot tighten the screws any more and they still do not work. Any solution? Thank you

reply | This was helpful (0) (Translated by Google)

Nora Heinzelmann 05-07-2022
Hello, has anyone had any experience disassembling a Platsa box (e.g. for a move). Specific question: how difficult/expensive is it to get the back panel out? Thanks!

reply | This was helpful (0) (Translated by Google)

Ilse 08-07-2022
I can no longer get the Hjälpa shelf out of my Platsa cabinet or move it. Is there a trick or is it not possible to do it non-destructively? I am thankful for every hint.

reply | This was helpful (0) (Translated by Google)

Mimi 12-12-2022
Can we cut flat furniture that is too big?

reply | This was helpful (0) (Translated by Google)

Angie 31-12-2022
How can I get the assembly instructions on YouTube I have been looking but can not find it for this particular Plasta wordrobe

reply | This was helpful (0)

More about this manual

We understand that it’s nice to have a paper manual for your IKEA PLATSA Wardrobe. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact IKEA. They might be able to provide an original manual. Are you looking for the manual of your IKEA PLATSA Wardrobe in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	IKEA
Model	PLATSA
Category	Wardrobes
File type	PDF
File size	2.59 MB

All manuals for IKEA Wardrobes
More manuals of Wardrobes

Frequently Asked Questions about IKEA PLATSA Wardrobe

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.