Home > Kitchenware > Ice Cube Makers > Ice-O-Matic Ice Cube Makers > Ice-O-Matic CIM0320FA Ice Cube Maker

Manual Ice-O-Matic CIM0320FA Ice Cube Maker

Need a manual for your Ice-O-Matic CIM0320FA Ice Cube Maker? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

ELEVATION SERIES REMOTE CONDENSER GUIDELINES

Remote Condenser Installation

For proper operation of the ice machine, the following installation guidelines must be followed. Failure to

do so may result in loss of production capacity, premature part failure, and may void all warranties.

Use the following for planning the placement of the remote condenser relative to the ice machine

Location Limits

Remote condenser location must not exceed ANY

of the following:

Maximum rise from the ice machine to the

remote condenser is 35 physical feet.

Maximum drop from the ice machine to

the remote condenser is 10 physical feet.

Physical line set maximum length is 75 ft.

Calculated

line set length maximum is 100

ft.

A mb i en t o pe ra t in g t e mp er at u re s:

-20°F (-28.9°C) to 120°F (48.9°C)

Calculation Formula

Drop = dd x 6.6

(dd = drop distance (ft.))

Rise = rd x 1.7

(rd = rise distance (ft.))

Horizontal Run = hd

(hd = horizontal distance (ft.))

Calculated Line Length = Drop + Rise + Horizontal Run

Configurations that do NOT meet these

requirements must receive written authorization

from Ice-O-Matic. This includes multi-pass or rack

system remote condensers

DO NOT: Route a line set that rises, then falls, then

rises or a line set that falls, then rises, then falls

Remote Condenser Location

Pre-charged line sets are available in 25, 40, 45, 60

or 75 foot length to connect the ice machine to the

remote condenser. Select the best available

location, protecting the remote condenser from

extremes of dirt, dust and sun. Meet all applicable

building codes. The services of a licensed

electrician may be required.

Roof Attachment

Install and attach the remote condenser to the roof

of the building using the methods and practices of

construction that conform to the local building

codes, including having a roofing contractor secure

the remote condenser to the roof.

Have an electrician connect the remote condenser

fan motor wires to the ice machine using the

junction box at the back of the machine.

Pre-charged Line Set Routing

CAUTION: Do not connect the pre-charged tubing

until all routing and forming of the tubing has been

completed. See the coupling instructions for

connecting information

Each set of pre-charged tubing refrigerant lines

consists of a 3/8 diameter liquid line and 1/2 inch

diameter discharge line. Both ends of each line

have quick connect couplings, one end of the line

set has a Schrader valve connection.

Note: the openings in the building or ceiling or wall,

listed in the next step, are the minimum sizes

recommended for passing the refrigerant lines through.

Have a roofing contractor cut a minimum hole for

the refrigerant lines of 2.50 inch. Check local

codes, a separate hole may be required for the

electrical power to the condenser.

CAUTION: DO NOT KINK OR CRIMP

REFRIGERANT TUBING WHEN INSTALLING

Download manual in English (PDF, 1.2 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Ice-O-Matic CIM0320FA Ice Cube Maker by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Ice-O-Matic CIM0320FA Ice Cube Maker?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Ice-O-Matic CIM0320FA Ice Cube Maker. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Ice-O-Matic CIM0320FA Ice Cube Maker. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Ice-O-Matic. They might be able to provide an original manual. Are you looking for the manual of your Ice-O-Matic CIM0320FA Ice Cube Maker in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.