Home > Household appliances > Air Purifiers > Honeywell Air Purifiers > Honeywell HPA030B Air Purifier

Manual Honeywell HPA030B Air Purifier

Need a manual for your Honeywell HPA030B Air Purifier? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

This model air purifier has an electronic filter check to remind you

when to check and replace the True HEPA filters and pre-filter

based on the air purifier’s hours of use. A red LED will illuminate

when it is time to check/replace the filters.

When the True HEPA filters or pre-filter need to be replaced,

the light will remain on until it is RESET. You may unplug the air

purifier without interrupting the filter check.

You should periodically check the filters. Depending on operating

conditions, the True HEPA filters should be replaced every

12 months and pre-filter every 3 months.

REPLACE WITH TRUE HEPA FILTER

and ODOR

REDUCING PREFILTER

These cleaning intervals are intended as guidelines only.

Performance of any filter media is dependent upon the

concentration of contaminants going through the system. High concentrations of contaminants such as dust, pet

dander and smoke will reduce the useful performance of the filter.

NOTE: None of the filters are washable. DO NOT immerse them in water.

To RESET the Electronic Filter Check:

When the Check Filter LED remains on and solid, it is time to replace the Odor Reducing Pre-filter and reset the

filter monitor. With the unit powered ON, press the FILTER RESET button below the Check Filter LED and hold for

approximately 2 seconds until the light turns off (Fig. 4).

When the LED illuminates and is flashing, it is time to replace the True HEPA filters and reset the filter monitor.

With the unit powered ON, press FILTER RESET button and hold for approximately 2 seconds

until the light turns OFF (Fig. 4).

Manual (or Early) Reset of Electronic Filter Check

Depending on your individual usage (environment and hours used), you may need to replace the filters more or

less frequently. Each time you replace your filters, you should reset the filter monitor. You may manually reset the

filter monitor for the pre-filter or the HEPA filter, or both. If you change the pre-filter or True HEPA filter before the

Check Filter LED is illuminated, it is possible to reset the filter monitor. You must first manually illuminate the

Check Filter LED. Follow these steps:

1. With unit powered ON, press the FILTER RESET button for 5 seconds to illuminate the LED in “solid” mode.

2. To reset filter monitor for pre-filter: press and hold FILTER RESET button for 2 seconds until LED changes to

flashing mode.

3. TAP FILTER RESET button to shut LED off. The pre-filter monitor is now set to “clean status”.

4. To reset filter monitor for HEPA filter: LED must be in “flashing mode”. Follow Step 1 above, then TAP FILTER

RESET button again to illuminate the LED in “flashing mode”.

5. Press and hold FILTER RESET button for 2 seconds until LED shuts off. The HEPA filter monitor is now set to

“clean status”.

6. To reset filter monitor for both pre-filter and HEPA filter: Follow Steps 1,2, and 5 above.

ELECTRONIC FILTER CHECK REMINDER

Will illuminate when it is time to replace the

True HEPA Filters or Odor Reducing Pre-filter

Fig. 4

Rating

Let us know what you think about the Honeywell HPA030B Air Purifier by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Honeywell HPA030B Air Purifier?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Honeywell HPA030B Air Purifier. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Honeywell HPA030B Air Purifier. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Honeywell. They might be able to provide an original manual. Are you looking for the manual of your Honeywell HPA030B Air Purifier in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Honeywell
Model	HPA030B
Category	Air Purifiers
File type	PDF
File size	5.12 MB

All manuals for Honeywell Air Purifiers
More manuals of Air Purifiers

Frequently Asked Questions about Honeywell HPA030B Air Purifier

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Does an air purifier also remove regular dust from the air? Verified

Yes, air purifiers also remove dust from the air that otherwise would need to be removed by dusting and cleaning. It depends on the air purifier up to what size of dust can be removed from the air.

This was helpful (168) Read more