Manual Holmes HAP1702-NTU-1 Air Purifier

Manual

IMPORTANT SAFEGUARDS

FEATURES

may switch to a different fan/filtration speed for optimal

filtration. An automatic adjustment in speed does not

demonstrate that the air has been cleaned but does

demonstrate that air quality has been determined and an

optimal speed has been selected. The Air Quality Sensor

may adjust fan/filtration speeds at varying rates as it

continues to measure air quality during use.

FILTER CHECK INDICATOR

Your Holmes

®

Air Purifier includes Aer1

®

Allergen

Performance Plus Filters, specially designed to improve air

quality for allergy sufferers!! The Aer1

®

Allergen

Performance Plus filter last for 12 months. See back panel

for other filter options.

The Filter Check Indicator light is designed to remind you

to check and change your filters every 11 months. To reset

the Filter Check Indicator, press and hold the Filter Reset

Button for 3 seconds only under working mode.

BEFORE USE

1. Carefully unpack your Air Purifier. Select a firm level

place where there are no obstructions to the air inlet

or filtered air outlet.

2. Remove the air inlet grill and check if the filter is

covered by a plastic bag. If it is, remove plastic bag

before use.

3. The carbon filters are packed in a plastic bag in the

box. Remove plastic bag, use the provided Velcro to

attach the carbon filters onto the Aer1

®

filters. Then,

place all filters back into the unit, and reinstall the air

inlet grill (see Fig. 1).

4. DO NOT POINT FILTERED AIR OUTLET TOWARDS WALL.

OPERATING INSTRUCTIONS

Plug into a 120V AC electrical outlet.

Power/Mode

1. Press the /Mode button to start operations, the air

purifier is default to run at LOW ( ).

2. Continue to press the /Mode button to cycle

through all speed settings/mode:

LOW ( ) - MEDIUM ( ) - HIGH ( ) – AQS

Select the appropriate setting and the corresponding

indicator light will illuminate to indicate which mode is

activated. See below section for details of Air Quality

Sensor Mode (AQS).

NOTE: For optimum air filtration, it is recommended

to operate the air purifier continuously. Its rugged

motor has been designed to give many years of use.

3. To release negative ions into the filtered air, press the

ionizer button ( ) to ON and the button will

illuminate in blue.

NOTE: The ionizer will not work unless the unit is

running.

Air Quality Sensor Mode ( )

The AQS feature uses the particle sensor to cycle between

low, medium and high speeds, based on surrounding

indoor air quality. To activate AQS mode, press the /

Mode button to select AQS and the AQS indicator light will

POWER CORD INSTRUCTIONS

• The length of cord used on this appliance was selected

to reduce tangling or tripping hazards.

• If a longer cord is necessary, an approved extension

cord may be used. The electrical rating of the

extension cord must be equal to or greater than the

electrical rating of the air purifier (see rating label

marked on bottom of the product).

• Care must be taken to arrange the extension cord so

that it will not drape over the countertop or tabletop

where it can be pulled on by children or accidentally

tripped over.

GET TO KNOW YOUR AIR PURIFIER

This unit is compatible with all Aer1

®

Filters. This allows

you to choose the filter that is just right for you. Below is

information on each filter:

TOTAL AIR - Advanced Dust Eliminating Technology

ODOR ELIMINATOR - 10x the odor fighting power

ALLERGEN REMOVER - True HEPA technology improves

air quality for allergy sufferers

ALLERGEN PERFORMANCE PLUS - True HEPA

technology improves air quality for allergy sufferers.

SMOKE GRABBER - 99% effective at removing smoke

from the air steam (*as small as 0.3 microns from air

passing through the filter)

IONIZER

This appliance has an optional ionizer feature which, when

turned on, releases negative ions into outgoing filtered air

to help the air purification process.

What Are Ions?

Ions are tiny particles that carry a positive or negative

charge. They exist naturally around us: in the air, water,

and ground. Both positive and negative ions are colorless,

odorless, and harmless.

How Does The Ionizer Work?

Negative ions help air purification by attaching themselves

to very small airborne particles in the room. These

particles take on a negative charge and may join with

positively charged particles such as dust, pollen, smoke,

and pet dander to form larger particles. These larger

particles are then more easily captured by the filter

system.

Important Notes:

Your ionizer may produce an occasional popping or

cracking sound. This is normal and occurs when a small

buildup of ions is discharged.

After extended use, you may notice dust around the grills

or front panel. This is caused by negative ions exiting the

air outlet, evidence of the ionizer’s air cleaning

effectiveness. You can remove the dust with a soft brush or

clean, damp cloth.

Larger particles may be attracted to positively charged

surfaces throughout the home, like walls or floors.

• This may occur more frequently when the filter is

nearing the end of its useful product life and unable to

capture as many charged particles.

• Excessive amounts of pet dander, dust, or smoke may

decrease the life expectancy of the filter and interfere

with the ionization process.

To help prevent particles from attracting to surfaces

throughout your home:

• You may want to run the ionizer less often.

• Check the condition of the filter more frequently.

CAUTION: The ionizer in this appliance produces less

ozone than the UL established limits of 50ppb. However, in

high concentrations, ozone can be harmful to birds and

small pets. To prevent ozone buildup, we suggest using the

ionizer in well ventilated areas with the air purifier fan on.

HIGH, MEDIUM AND LOW SPEED

SETTINGS

For optimum air filtration, operate your Holmes

®

air

purifier continuously on the MEDIUM ( ) setting. Its

rugged motor has been designed to give many years of

use. For quieter operation (such as in a bedroom), select

the LOW ( ) setting. When high levels of air pollution

are present, select the HIGH ( ) setting to quickly

circulate and filter the room air.

AIR QUALITY SENSOR

Your Air Purifier is equipped with Air Quality Sensor to

cycle between low, medium and high speeds, based on

surrounding indoor air quality. Press Power /Mode

button to select AQS setting, the air purifier will run on

High upon startup in order to quickly analyze surrounding

air quality. Once air quality has been determined, the unit

When using electrical appliances, basic safety precautions

should always be followed to reduce the risk of fire, electric

shock, and injury to persons. These precautions include:

1. Read all instructions before using the appliance.

2. To avoid fire or shock hazard, plug the appliance

directly into a 120V AC electrical outlet.

3. If the filter is covered by a bag when shipped,

remove plastic bag before use.

4. Keep the cord out of heavy traffic areas. To avoid

fire hazard, NEVER put the cord under rugs, near

heat registers, radiators, stoves, or heaters.

5. To protect against electrical hazards, DO NOT

immerse the appliance in water or other liquids. Do

not use near water.

6. Close supervision is necessary when any appliance is

used by or near children, or disabled persons.

7. Always unplug the air purifier before moving or

cleaning the unit, opening the grill, changing the filters

and whenever the unit is not in use. To disconnect the

unit, be sure to pull the plug and not the cord.

8. NEVER drop or insert any objects into the openings of

the unit.

9. DO NOT operate any appliance with a damaged cord

or plug. If the motor fan fails to operate or the unit

has been dropped or damaged in any manner, return

appliance to manufacturer for examination and/or

repair.

10. Use appliance only for intended household use as

described in this manual. Any other use not

recommended by the manufacturer may cause fire,

electric shock, or injury to persons. The use of

attachments not recommended or sold by Jarden

Consumer Solutions may cause injury.

11. DO NOT use outdoors.

12. NEVER place on a soft surface such as a bed or sofa

as this could cause the unit to tip over and block the

air inlet or outlet grills.

13.

Keep unit away from heated surfaces and open flames.

14. DO NOT attempt to repair or adjust any electrical or

mechanical functions on this unit. Doing so may

cause injury and will void your warranty. The inside

of the unit contains no user serviceable parts. All

servicing should be performed by Jarden Consumer

Solutions or an authorized Jarden Consumer

Solutions Center.

15. DO NOT place anything on top of unit.

16. NEVER use detergents, gasoline, glass purifier,

furniture polish, paint thinner, or other household

solvents to clean any part of the appliance.

17. Always turn the appliance off before unplugging it.

18. The ionizer may cause a static charge to build up on

the air outlet grill. A static charge may be felt if the

unit is not properly grounded. To avoid a static

charge, plug the unit's three-prong plug into a

grounded outlet. The static charge will not occur if

the ionizer is off.

19.

The ionizer in this appliance produces less ozone than

the UL established limits of 50ppb (parts per billion).

However, in high concentrations, ozone can be harmful

to birds and small pets. To prevent ozone buildup, we

suggest using the ionizer in well ventilated areas with

the fan on.

20. This appliance should only be used in a room with

temperatures between 40° F and 110° F.

21. To reduce the risk of fire or electric shock, DO NOT

use this appliance with any solid-state speed control

device.

SAVE THESE

INSTRUCTIONS

FEATURES - OPERATIONS

CLEANING/MAINTENANCE

FILTER REPLACEMENT

illuminate in RED (default) and the unit will run at HIGH

setting. The AQS indicator light will change in 3 colors to

indicate different indoor air quality conditions, and the

speed setting will be changed automatically based on the

current indoor air quality:

RED – Poor air quality: The unit will run at HIGH setting

to improve air quality

YELLOW – Average air quality: The unit will run at

MEDIUM setting to maintain air quality

GREEN – Good air quality: The unit will run at LOW

setting to achieve energy saving.

NOTE: When AQS mode is activated, only the AQS

indicator light will illuminate, all the other speed setting

indicator lights (Hi/Med/Lo) will go off under AQS mode.

Timer

You may set the timer so it automatically turns off when

the desired time has elapsed:

1. Press the TIMER ( ) button to select the desired

number of hours you want the unit to operate (2Hr,

4Hr, 6Hr or 8Hr):

• The corresponding indicator light will illuminate to

indicate which timer option is selected.

• When the air purifier is running up to the set time, the

air purifier will turn off automatically.

2. To CANCEL the timer, press the TIMER button until

TIMER indicator lights go off.

CLEANING/MAINTENANCE INSTRUCTIONS

1. Turn the air purifier off and unplug it before cleaning.

2. The outside of the air purifier can be cleaned with a

soft, clean dampened cloth.

3. The air inlet grill (reference Fig. 1) can be removed

and washed in warm soapy water (not dishwasher

safe). Dry before replacing in the unit.

4. The filtered air outlet can be cleaned of dust with a

small, soft brush.

5. If you wish to clean the inside of the air purifier,

please only use a dry, soft cloth to wipe it down.

WARNING: Do not allow moisture to come in contact

with the main housing of the air purifier.

FILTER REPLACEMENT INSTRUCTIONS

IMPORTANT:

• DO NOT attempt to wash and re-use the Aer1

®

Filters.

• If the filters are enclosed in plastic bags, remove them

before use.

NOTE:

Every few weeks, check the condition of filters. Filter life

will vary, depending on air quality and usage (see below).

Under normal conditions of continuous use, the Aer1

®

Total Air, Odor and Smoke Filter will last 4 months while

the Allergen and Allergen Performance Plus Filter will last

12 months. Check the condition of the Carbon Filters for

every 3-4 months and replace if needed. Carbon filters

need to be replaced every 60-90 days.

After approximately 11 months of operation, the Filter

Check Indicator will light up to alert you to service the filters.

• This Filter Check indicator is to remind you to wash the

foam pre-filter and replace your Aer1

®

Filters and

carbon filters.

Filters can be purchased at a retailer near you, online at www.aer1filters.com, or by calling (855) Try-aer1.

Air Purifier

Model Number

Filter Quantity

Needed

Compatible with all

filter models below

Filter Description

HAP1702

2

HAPF30AT

HAPF30AO

HAPF30AS

HAPF300AH

HAPF300AP (D filter)

HAPF30 (A filter)

aer1

®

Total Air Filter

aer1

®

Odor Filter

aer1

®

Smoke Grabber Filter

aer1

®

Allergen Remover Filter

aer1

®

Allergen Performance Plus "D" Filter

Holmes

®

"A" Filter

2 AOR31 Carbon Filter

To reduce the risk of electric shock, this equipment has a grounding type plug that has a third (grounding) pin.

This plug will only fit into a grounding type power outlet. If the plug does not fit into the outlet, contact qualified

personnel to install the proper outlet. Do not alter the plug in any way.

THIS PRODUCT IS EQUIPPED WITH A 3-PRONG PLUG

Fig. 1

A. Speed Setting

Indicator Lights

B. Power/Mode Button

C. Filter Reset

Button/Light

D. Timer Button

E. Timer Indicator lights

F. Ionizer Button/Light

G. AQS Indicator Light

H. Filtered Air Outlet

I. Aer1

®

Filters

J. Carbon Filters

K. Washable Foam

Pre-Filter

L. Air Inlet Grill

H

K

J

J

L

I

I

C

B

D

F

A

E

G

HAP1702-NTU_16EM2.indd 2 9/26/16 9:41 AM

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Holmes HAP1702-NTU-1 Air Purifier. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Holmes. They might be able to provide an original manual. Are you looking for the manual of your Holmes HAP1702-NTU-1 Air Purifier in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Holmes Air Purifiers
More manuals of Air Purifiers

Frequently Asked Questions about Holmes HAP1702-NTU-1 Air Purifier

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Holmes HAP2404 Air Purifier

Manual

Holmes HAP1200-NU Air Purifier

Manual

Holmes HAP9425B-TU-2 Air Purifier

Manual

Holmes HAP706-NU-1 Air Purifier

Manual

Holmes HAP9413B-TU-2 Air Purifier

Manual

Holmes HAP702-NTU-1 Air Purifier

Manual

Holmes HAP242 Air Purifier

Manual

Holmes HAP243 Air Purifier

Related categories